linux-kernel - [PATCH V4 5/5] arm64: dts: ti: am65/j721e/j7200: Mark firmware used uart as "reserved"

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 13 Nov 2020 15:18:26 -0600
From:   Nishanth Menon <nm@...com>
To:     Roger Quadros <rogerq@...com>, Keerthy <j-keerthy@...com>,
        Jyri Sarha <jsarha@...com>,
        Tomi Valkeinen <tomi.valkeinen@...com>,
        Peter Ujfalusi <peter.ujfalusi@...com>,
        Lokesh Vutla <lokeshvutla@...com>,
        Rob Herring <robh+dt@...nel.org>,
        Tony Lindgren <tony@...mide.com>, Tero Kristo <t-kristo@...com>
CC:     <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, Nishanth Menon <nm@...com>,
        Vignesh Raghavendra <vigneshr@...com>
Subject: [PATCH V4 5/5] arm64: dts: ti: am65/j721e/j7200: Mark firmware used uart as "reserved"

Follow the device tree standards that states to set the
status="reserved" if an device is operational, but used by a non-linux
firmware in the system.

Signed-off-by: Nishanth Menon <nm@...com>
Reviewed-by: Tony Lindgren <tony@...mide.com>
Acked-by: Vignesh Raghavendra <vigneshr@...com>
---
v4: no change

v3: https://lore.kernel.org/linux-arm-kernel/20201112183538.6805-6-nm@ti.com/
V2: https://lore.kernel.org/linux-arm-kernel/20201112014929.25227-6-nm@ti.com/
V1: didnot exist

 arch/arm64/boot/dts/ti/k3-am654-base-board.dts        | 2 +-
 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 4 ++--
 arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index c8c9aa98b561..fe3043943906 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -242,7 +242,7 @@ AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
 
 &wkup_uart0 {
 	/* Wakeup UART is used by System firmware */
-	status = "disabled";
+	status = "reserved";
 };
 
 &main_uart0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 7d2ff1c3b50f..96fa26365248 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -79,7 +79,7 @@ J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
 
 &wkup_uart0 {
 	/* Wakeup UART is used by System firmware */
-	status = "disabled";
+	status = "reserved";
 };
 
 &main_uart0 {
@@ -89,7 +89,7 @@ &main_uart0 {
 
 &main_uart2 {
 	/* MAIN UART 2 is used by R5F firmware */
-	status = "disabled";
+	status = "reserved";
 };
 
 &main_uart3 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 9416528caa8a..5754892f8501 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -221,7 +221,7 @@ J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* MCU_MDIO0_MDIO */
 
 &wkup_uart0 {
 	/* Wakeup UART is used by System firmware */
-	status = "disabled";
+	status = "reserved";
 };
 
 &main_uart0 {
-- 
2.29.2