| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201113154632.24973-4-sergio.paracuellos@gmail.com>
Date: Fri, 13 Nov 2020 16:46:30 +0100
From: Sergio Paracuellos <sergio.paracuellos@...il.com>
To: mturquette@...libre.com
Cc: sboyd@...nel.org, robh+dt@...nel.org, tsbogend@...ha.franken.de,
john@...ozen.org, gregkh@...uxfoundation.org, gch981213@...il.com,
hackpascal@...il.com, jiaxun.yang@...goat.com,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-mips@...r.kernel.org,
devel@...verdev.osuosl.org, neil@...wn.name
Subject: [PATCH v3 3/5] clk: ralink: add clock driver for mt7621 SoC
The documentation for this SOC only talks about two
registers regarding to the clocks:
* SYSC_REG_CPLL_CLKCFG0 - provides some information about
boostrapped refclock. PLL and dividers used for CPU and some
sort of BUS.
* SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable
clocks for all or some ip cores.
Looking into driver code, and some openWRT patched there are
another frequences which are used in some drivers (uart, sd...).
According to all of this information the clock plan for this
SoC is set as follows:
- Main top clock "xtal" from where all the rest of the world is
derived.
- CPU clock "cpu" derived from "xtal" frequencies and a bunch of
register reads and predividers.
- BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz.
- Fixed clocks from "xtal":
* "50m": 50 MHz.
* "125m": 125 MHz.
* "150m": 150 MHz.
* "250m": 250 MHz.
* "270m": 270 MHz.
We also have a buch of gate clocks with their parents:
* "hsdma": "150m"
* "fe": "250m"
* "sp_divtx": "270m"
* "timer": "50m"
* "pcm": "270m"
* "pio": "50m"
* "gdma": "bus"
* "nand": "125m"
* "i2c": "50m"
* "i2s": "270m"
* "spi": "bus"
* "uart1": "50m"
* "uart2": "50m"
* "uart3": "50m"
* "eth": "50m"
* "pcie0": "125m"
* "pcie1": "125m"
* "pcie2": "125m"
* "crypto": "250m"
* "shxc": "50m"
With this information the clk driver will provide clock and gates
functionality from a a set of hardcoded clocks allowing to define
a nice device tree without fixed clocks.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@...il.com>
---
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/ralink/Kconfig | 14 ++
drivers/clk/ralink/Makefile | 2 +
drivers/clk/ralink/clk-mt7621.c | 408 ++++++++++++++++++++++++++++++++
5 files changed, 426 insertions(+)
create mode 100644 drivers/clk/ralink/Kconfig
create mode 100644 drivers/clk/ralink/Makefile
create mode 100644 drivers/clk/ralink/clk-mt7621.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c715d4681a0b..5f94c4329033 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -372,6 +372,7 @@ source "drivers/clk/mediatek/Kconfig"
source "drivers/clk/meson/Kconfig"
source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/qcom/Kconfig"
+source "drivers/clk/ralink/Kconfig"
source "drivers/clk/renesas/Kconfig"
source "drivers/clk/rockchip/Kconfig"
source "drivers/clk/samsung/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index da8fcf147eb1..6578e167b047 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -100,6 +100,7 @@ obj-$(CONFIG_COMMON_CLK_NXP) += nxp/
obj-$(CONFIG_MACH_PISTACHIO) += pistachio/
obj-$(CONFIG_COMMON_CLK_PXA) += pxa/
obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/
+obj-y += ralink/
obj-y += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
diff --git a/drivers/clk/ralink/Kconfig b/drivers/clk/ralink/Kconfig
new file mode 100644
index 000000000000..7e8697327e0c
--- /dev/null
+++ b/drivers/clk/ralink/Kconfig
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# MediaTek Mt7621 Clock Driver
+#
+menu "Clock driver for mediatek mt7621 SoC"
+ depends on SOC_MT7621 || COMPILE_TEST
+
+config CLK_MT7621
+ bool "Clock driver for MediaTek MT7621"
+ depends on SOC_MT7621 || COMPILE_TEST
+ default SOC_MT7621
+ help
+ This driver supports MediaTek MT7621 basic clocks.
+endmenu
diff --git a/drivers/clk/ralink/Makefile b/drivers/clk/ralink/Makefile
new file mode 100644
index 000000000000..cf6f9216379d
--- /dev/null
+++ b/drivers/clk/ralink/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CLK_MT7621) += clk-mt7621.o
diff --git a/drivers/clk/ralink/clk-mt7621.c b/drivers/clk/ralink/clk-mt7621.c
new file mode 100644
index 000000000000..733aecffd6a9
--- /dev/null
+++ b/drivers/clk/ralink/clk-mt7621.c
@@ -0,0 +1,408 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Mediatek MT7621 Clock Driver
+ * Author: Sergio Paracuellos <sergio.paracuellos@...il.com>
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <dt-bindings/clock/mt7621-clk.h>
+
+/* Configuration registers */
+#define SYSC_REG_SYSTEM_CONFIG0 0x10
+#define SYSC_REG_SYSTEM_CONFIG1 0x14
+#define SYSC_REG_CLKCFG0 0x2c
+#define SYSC_REG_CLKCFG1 0x30
+#define SYSC_REG_CUR_CLK_STS 0x44
+
+#define MEMC_REG_CPU_PLL 0x648
+#define XTAL_MODE_SEL_MASK 0x7
+#define XTAL_MODE_SEL_SHIFT 6
+
+#define CPU_CLK_SEL_MASK 0x3
+#define CPU_CLK_SEL_SHIFT 30
+
+#define CUR_CPU_FDIV_MASK 0x1f
+#define CUR_CPU_FDIV_SHIFT 8
+#define CUR_CPU_FFRAC_MASK 0x1f
+#define CUR_CPU_FFRAC_SHIFT 0
+
+#define CPU_PLL_PREDIV_MASK 0x3
+#define CPU_PLL_PREDIV_SHIFT 12
+#define CPU_PLL_FBDIV_MASK 0x7f
+#define CPU_PLL_FBDIV_SHIFT 4
+
+#define MHZ(x) ((x) * 1000 * 1000)
+
+struct mt7621_clk_provider {
+ struct device_node *node;
+ struct regmap *syscon_regmap;
+ struct clk_hw_onecell_data *clk_data;
+};
+
+struct mt7621_clk {
+ struct mt7621_clk_provider *clk_prov;
+ struct clk_hw hw;
+};
+
+struct mt7621_fixed_clk {
+ u8 idx;
+ const char *name;
+ const char *parent_name;
+ struct mt7621_clk_provider *clk_prov;
+ unsigned long rate;
+ struct clk_hw *hw;
+};
+
+struct mt7621_gate {
+ u8 idx;
+ const char *name;
+ const char *parent_name;
+ struct mt7621_clk_provider *clk_prov;
+ u32 bit_idx;
+ struct clk_hw hw;
+};
+
+#define GATE(_id, _name, _pname, _shift) \
+ { \
+ .idx = _id, \
+ .name = _name, \
+ .parent_name = _pname, \
+ .clk_prov = NULL, \
+ .bit_idx = _shift \
+ }
+
+static struct mt7621_gate mt7621_gates[] = {
+ GATE(MT7621_CLK_HSDMA, "hsdma", "150m", BIT(5)),
+ GATE(MT7621_CLK_FE, "fe", "250m", BIT(6)),
+ GATE(MT7621_CLK_SP_DIVTX, "sp_divtx", "270m", BIT(7)),
+ GATE(MT7621_CLK_TIMER, "timer", "50m", BIT(8)),
+ GATE(MT7621_CLK_PCM, "pcm", "270m", BIT(11)),
+ GATE(MT7621_CLK_PIO, "pio", "50m", BIT(13)),
+ GATE(MT7621_CLK_GDMA, "gdma", "bus", BIT(14)),
+ GATE(MT7621_CLK_NAND, "nand", "125m", BIT(15)),
+ GATE(MT7621_CLK_I2C, "i2c", "50m", BIT(16)),
+ GATE(MT7621_CLK_I2S, "i2s", "270m", BIT(17)),
+ GATE(MT7621_CLK_SPI, "spi", "bus", BIT(18)),
+ GATE(MT7621_CLK_UART1, "uart1", "50m", BIT(19)),
+ GATE(MT7621_CLK_UART2, "uart2", "50m", BIT(20)),
+ GATE(MT7621_CLK_UART3, "uart3", "50m", BIT(21)),
+ GATE(MT7621_CLK_ETH, "eth", "50m", BIT(23)),
+ GATE(MT7621_CLK_PCIE0, "pcie0", "125m", BIT(24)),
+ GATE(MT7621_CLK_PCIE1, "pcie1", "125m", BIT(25)),
+ GATE(MT7621_CLK_PCIE2, "pcie2", "125m", BIT(26)),
+ GATE(MT7621_CLK_CRYPTO, "crypto", "250m", BIT(29)),
+ GATE(MT7621_CLK_SHXC, "shxc", "50m", BIT(30))
+};
+
+static inline struct mt7621_gate *to_mt7621_gate(struct clk_hw *hw)
+{
+ return container_of(hw, struct mt7621_gate, hw);
+}
+
+static int mt7621_gate_enable(struct clk_hw *hw)
+{
+ struct mt7621_gate *clk_gate = to_mt7621_gate(hw);
+ struct regmap *scon = clk_gate->clk_prov->syscon_regmap;
+
+ return regmap_update_bits(scon, SYSC_REG_CLKCFG1,
+ clk_gate->bit_idx, clk_gate->bit_idx);
+}
+
+static void mt7621_gate_disable(struct clk_hw *hw)
+{
+ struct mt7621_gate *clk_gate = to_mt7621_gate(hw);
+ struct regmap *scon = clk_gate->clk_prov->syscon_regmap;
+
+ regmap_update_bits(scon, SYSC_REG_CLKCFG1, clk_gate->bit_idx, 0);
+}
+
+static int mt7621_gate_is_enabled(struct clk_hw *hw)
+{
+ struct mt7621_gate *clk_gate = to_mt7621_gate(hw);
+ struct regmap *scon = clk_gate->clk_prov->syscon_regmap;
+ unsigned int val;
+
+ if (regmap_read(scon, SYSC_REG_CLKCFG1, &val))
+ return 0;
+
+ return val & clk_gate->bit_idx;
+}
+
+static const struct clk_ops mt7621_gate_ops = {
+ .enable = mt7621_gate_enable,
+ .disable = mt7621_gate_disable,
+ .is_enabled = mt7621_gate_is_enabled,
+};
+
+static int mt7621_gate_ops_init(struct device_node *np,
+ struct mt7621_gate *sclk)
+{
+ struct clk_init_data init = {
+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .num_parents = 1,
+ .parent_names = &sclk->parent_name,
+ .ops = &mt7621_gate_ops,
+ .name = sclk->name,
+ };
+
+ sclk->hw.init = &init;
+ return of_clk_hw_register(np, &sclk->hw);
+}
+
+static int mt7621_register_gates(struct mt7621_clk_provider *clk_prov)
+{
+ struct clk_hw_onecell_data **clk_data = &clk_prov->clk_data;
+ struct clk_hw **hws = (*clk_data)->hws;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(mt7621_gates); i++) {
+ struct mt7621_gate *sclk = &mt7621_gates[i];
+
+ sclk->clk_prov = clk_prov;
+ ret = mt7621_gate_ops_init(clk_prov->node, sclk);
+ if (ret) {
+ pr_err("Couldn't register clock %s\n", sclk->name);
+ goto err_clk_unreg;
+ }
+
+ hws[sclk->idx] = &sclk->hw;
+ (*clk_data)->num++;
+ }
+
+ return 0;
+
+err_clk_unreg:
+ while (--i >= 0) {
+ struct mt7621_gate *sclk = &mt7621_gates[i];
+
+ clk_hw_unregister(&sclk->hw);
+ }
+ return ret;
+}
+
+#define FIXED(_id, _name, _pname, _rate) \
+ { \
+ .idx = _id, \
+ .name = _name, \
+ .parent_name = _pname, \
+ .clk_prov = NULL, \
+ .rate = _rate \
+ }
+
+static struct mt7621_fixed_clk mt7621_fixed_clks[] = {
+ FIXED(MT7621_CLK_50M, "50m", "xtal", MHZ(50)),
+ FIXED(MT7621_CLK_125M, "125m", "xtal", MHZ(125)),
+ FIXED(MT7621_CLK_150M, "150m", "xtal", MHZ(150)),
+ FIXED(MT7621_CLK_250M, "250m", "xtal", MHZ(250)),
+ FIXED(MT7621_CLK_270M, "270m", "xtal", MHZ(270)),
+};
+
+static int mt7621_register_fixed_clocks(struct mt7621_clk_provider *clk_prov)
+{
+ struct clk_hw_onecell_data **clk_data = &clk_prov->clk_data;
+ struct clk_hw **hws = (*clk_data)->hws;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(mt7621_fixed_clks); i++) {
+ struct mt7621_fixed_clk *sclk = &mt7621_fixed_clks[i];
+
+ sclk->clk_prov = clk_prov;
+ sclk->hw = clk_hw_register_fixed_rate(NULL, sclk->name,
+ sclk->parent_name, 0,
+ sclk->rate);
+ if (IS_ERR(sclk->hw)) {
+ pr_err("Couldn't register clock %s\n", sclk->name);
+ ret = PTR_ERR(sclk->hw);
+ goto err_clk_unreg;
+ }
+
+ hws[sclk->idx] = sclk->hw;
+ (*clk_data)->num++;
+ }
+
+ return 0;
+
+err_clk_unreg:
+ while (--i >= 0) {
+ struct mt7621_fixed_clk *sclk = &mt7621_fixed_clks[i];
+
+ clk_hw_unregister_fixed_rate(sclk->hw);
+ }
+ return ret;
+}
+
+static inline struct mt7621_clk *to_mt7621_clk(struct clk_hw *hw)
+{
+ return container_of(hw, struct mt7621_clk, hw);
+}
+
+static unsigned long mt7621_xtal_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct mt7621_clk *clk = to_mt7621_clk(hw);
+ struct regmap *scon = clk->clk_prov->syscon_regmap;
+ u32 val;
+
+ regmap_read(scon, SYSC_REG_SYSTEM_CONFIG0, &val);
+ val = (val >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK;
+
+ if (val <= 2)
+ return MHZ(20);
+ else if (val <= 5)
+ return MHZ(40);
+
+ return MHZ(25);
+}
+
+static unsigned long mt7621_cpu_recalc_rate(struct clk_hw *hw,
+ unsigned long xtal_clk)
+{
+ static const u32 prediv_tbl[] = { 0, 1, 2, 2 };
+ struct mt7621_clk *clk = to_mt7621_clk(hw);
+ struct regmap *scon = clk->clk_prov->syscon_regmap;
+ u32 clkcfg, clk_sel, curclk, ffiv, ffrac;
+ u32 pll, prediv, fbdiv;
+ unsigned long cpu_clk;
+
+ regmap_read(scon, SYSC_REG_CLKCFG0, &clkcfg);
+ clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK;
+
+ regmap_read(scon, SYSC_REG_CUR_CLK_STS, &curclk);
+ ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK;
+ ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK;
+
+ switch (clk_sel) {
+ case 0:
+ cpu_clk = MHZ(500);
+ break;
+ case 1:
+ pll = rt_memc_r32(MEMC_REG_CPU_PLL);
+ fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK;
+ prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK;
+ cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv];
+ break;
+ default:
+ cpu_clk = xtal_clk;
+ }
+
+ return cpu_clk / ffiv * ffrac;
+}
+
+static unsigned long mt7621_bus_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return parent_rate / 4;
+}
+
+#define CLK_BASE(_name, _parent, _recalc) { \
+ .init = &(struct clk_init_data) { \
+ .name = _name, \
+ .ops = &(const struct clk_ops) { \
+ .recalc_rate = _recalc, \
+ }, \
+ .parent_names = (const char *const[]) { _parent }, \
+ .num_parents = _parent ? 1 : 0 \
+ }, \
+}
+
+static struct mt7621_clk mt7621_clks_base[] = {
+ { NULL, CLK_BASE("xtal", NULL, mt7621_xtal_recalc_rate) },
+ { NULL, CLK_BASE("cpu", "xtal", mt7621_cpu_recalc_rate) },
+ { NULL, CLK_BASE("bus", "cpu", mt7621_bus_recalc_rate) },
+};
+
+static int mt7621_register_top_clocks(struct mt7621_clk_provider *clk_prov)
+{
+ struct clk_hw_onecell_data **clk_data = &clk_prov->clk_data;
+ struct clk_hw **hws = (*clk_data)->hws;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(mt7621_clks_base); i++) {
+ struct mt7621_clk *sclk = &mt7621_clks_base[i];
+
+ sclk->clk_prov = clk_prov;
+ ret = of_clk_hw_register(clk_prov->node, &sclk->hw);
+ if (ret) {
+ pr_err("Couldn't register top clock %i\n", i);
+ goto err_clk_unreg;
+ }
+
+ hws[i] = &sclk->hw;
+ (*clk_data)->num++;
+ }
+
+ return 0;
+
+err_clk_unreg:
+ while (--i >= 0) {
+ struct mt7621_clk *sclk = &mt7621_clks_base[i];
+
+ clk_hw_unregister(&sclk->hw);
+ }
+ return ret;
+}
+
+static void __init mt7621_clk_init(struct device_node *node)
+{
+ struct mt7621_clk_provider *clk_prov;
+ struct clk_hw_onecell_data **clk_data;
+ int ret, count;
+
+ clk_prov = kzalloc(sizeof(*clk_prov), GFP_KERNEL);
+ if (!clk_prov)
+ return;
+
+ clk_prov->syscon_regmap = syscon_regmap_lookup_by_phandle(node, "ralink,sysctl");
+ if (IS_ERR(clk_prov->syscon_regmap)) {
+ pr_err("Could not get syscon regmap\n");
+ goto free_clk_prov;
+ }
+
+ clk_prov->node = node;
+
+ clk_data = &clk_prov->clk_data;
+ count = ARRAY_SIZE(mt7621_clks_base) + ARRAY_SIZE(mt7621_gates);
+ *clk_data = kzalloc(struct_size(*clk_data, hws, count), GFP_KERNEL);
+ if (!*clk_data)
+ goto free_clk_prov;
+
+ ret = mt7621_register_top_clocks(clk_prov);
+ if (ret) {
+ pr_err("Couldn't register top clocks\n");
+ goto free_clk_data;
+ }
+
+ ret = mt7621_register_fixed_clocks(clk_prov);
+ if (ret) {
+ pr_err("Couldn't register fixed clocks\n");
+ goto free_clk_data;
+ }
+
+ ret = mt7621_register_gates(clk_prov);
+ if (ret) {
+ pr_err("Couldn't register fixed clock gates\n");
+ goto free_clk_data;
+ }
+
+ of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_prov->clk_data);
+
+ return;
+
+free_clk_data:
+ kfree(clk_prov->clk_data);
+
+free_clk_prov:
+ kfree(clk_prov);
+}
+
+CLK_OF_DECLARE(mt7621_clk, "mediatek,mt7621-clk", mt7621_clk_init);
+
+MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@...il.com>");
+MODULE_DESCRIPTION("Mediatek Mt7621 clock driver");
+MODULE_LICENSE("GPL v2");
--
2.25.1
Powered by blists - more mailing lists