lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201116173141.31873-3-kishon@ti.com>
Date:   Mon, 16 Nov 2020 23:01:40 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Tero Kristo <t-kristo@...com>, Nishanth Menon <nm@...com>,
        Rob Herring <robh+dt@...nel.org>,
        Tom Joseph <tjoseph@...ence.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Bjorn Helgaas <bhelgaas@...gle.com>
CC:     <linux-omap@...r.kernel.org>,
        Kishon Vijay Abraham I <kishon@...com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-pci@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH 2/3] PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg

Get "syscon" pcie_ctrl offset from the argument of "ti,syscon-pcie-ctrl"
phandle. Previously a subnode to "syscon" node was added which has the
exact memory mapped address of pcie_ctrl but now the offset of pcie_ctrl
within "syscon" is now being passed as argument to "ti,syscon-pcie-ctrl"
phandle.

Link: http://lore.kernel.org/r/CAL_JsqKiUcO76bo1GoepWM1TusJWoty_BRy2hFSgtEVMqtrvvQ@mail.gmail.com
Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 28 +++++++++++++++-------
 1 file changed, 19 insertions(+), 9 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 586b9d69fa5e..d615e6313252 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -12,6 +12,7 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/mfd/syscon.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
 #include <linux/pci.h>
@@ -153,7 +154,8 @@ static const struct cdns_pcie_ops j721e_pcie_ops = {
 	.link_up = j721e_pcie_link_up,
 };
 
-static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
+static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon,
+			       unsigned int offset)
 {
 	struct device *dev = pcie->dev;
 	u32 mask = J721E_MODE_RC;
@@ -164,7 +166,7 @@ static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
 	if (mode == PCI_MODE_RC)
 		val = J721E_MODE_RC;
 
-	ret = regmap_update_bits(syscon, 0, mask, val);
+	ret = regmap_update_bits(syscon, offset, mask, val);
 	if (ret)
 		dev_err(dev, "failed to set pcie mode\n");
 
@@ -172,7 +174,7 @@ static int j721e_pcie_set_mode(struct j721e_pcie *pcie, struct regmap *syscon)
 }
 
 static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
-				     struct regmap *syscon)
+				     struct regmap *syscon, unsigned int offset)
 {
 	struct device *dev = pcie->dev;
 	struct device_node *np = dev->of_node;
@@ -185,7 +187,7 @@ static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
 		link_speed = 2;
 
 	val = link_speed - 1;
-	ret = regmap_update_bits(syscon, 0, GENERATION_SEL_MASK, val);
+	ret = regmap_update_bits(syscon, offset, GENERATION_SEL_MASK, val);
 	if (ret)
 		dev_err(dev, "failed to set link speed\n");
 
@@ -193,7 +195,7 @@ static int j721e_pcie_set_link_speed(struct j721e_pcie *pcie,
 }
 
 static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
-				     struct regmap *syscon)
+				     struct regmap *syscon, unsigned int offset)
 {
 	struct device *dev = pcie->dev;
 	u32 lanes = pcie->num_lanes;
@@ -201,7 +203,7 @@ static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
 	int ret;
 
 	val = LANE_COUNT(lanes - 1);
-	ret = regmap_update_bits(syscon, 0, LANE_COUNT_MASK, val);
+	ret = regmap_update_bits(syscon, offset, LANE_COUNT_MASK, val);
 	if (ret)
 		dev_err(dev, "failed to set link count\n");
 
@@ -212,6 +214,7 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
 	struct device_node *node = dev->of_node;
+	struct of_phandle_args args;
 	struct regmap *syscon;
 	int ret;
 
@@ -221,19 +224,26 @@ static int j721e_pcie_ctrl_init(struct j721e_pcie *pcie)
 		return PTR_ERR(syscon);
 	}
 
-	ret = j721e_pcie_set_mode(pcie, syscon);
+	ret = of_parse_phandle_with_fixed_args(node, "ti,syscon-pcie-ctrl", 1,
+					       0, &args);
+	if (ret) {
+		dev_err(dev, "failed to parse ti,syscon-pcie-ctrl\n");
+		return ret;
+	}
+
+	ret = j721e_pcie_set_mode(pcie, syscon, args.args[0]);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set pci mode\n");
 		return ret;
 	}
 
-	ret = j721e_pcie_set_link_speed(pcie, syscon);
+	ret = j721e_pcie_set_link_speed(pcie, syscon, args.args[0]);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set link speed\n");
 		return ret;
 	}
 
-	ret = j721e_pcie_set_lane_count(pcie, syscon);
+	ret = j721e_pcie_set_lane_count(pcie, syscon, args.args[0]);
 	if (ret < 0) {
 		dev_err(dev, "Failed to set num-lanes\n");
 		return ret;
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ