| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201116101315.71720-3-narmstrong@baylibre.com>
Date: Mon, 16 Nov 2020 11:13:15 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: kishon@...com, vkoul@...nel.org
Cc: Neil Armstrong <narmstrong@...libre.com>,
linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [RESEND PATCH v3 2/2] phy: amlogic: Add AXG MIPI D-PHY driver
The Amlogic AXG SoCs embeds a MIPI D-PHY used to communicate with DSI
panels.
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
drivers/phy/amlogic/Kconfig | 12 +
drivers/phy/amlogic/Makefile | 1 +
drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c | 413 ++++++++++++++++++
3 files changed, 426 insertions(+)
create mode 100644 drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
index 617cf073e9aa..99e8a4c7f1f3 100644
--- a/drivers/phy/amlogic/Kconfig
+++ b/drivers/phy/amlogic/Kconfig
@@ -70,3 +70,15 @@ config PHY_MESON_AXG_MIPI_PCIE_ANALOG
Enable this to support the Meson MIPI + PCIE analog PHY
found in Meson AXG SoCs.
If unsure, say N.
+
+config PHY_MESON_AXG_MIPI_DPHY
+ tristate "Meson AXG MIPI DPHY driver"
+ default ARCH_MESON
+ depends on OF && (ARCH_MESON || COMPILE_TEST)
+ select GENERIC_PHY
+ select REGMAP_MMIO
+ select GENERIC_PHY_MIPI_DPHY
+ help
+ Enable this to support the Meson MIPI DPHY found in Meson AXG
+ SoCs.
+ If unsure, say N.
diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
index 99702a45e9be..8fa07fbd0d92 100644
--- a/drivers/phy/amlogic/Makefile
+++ b/drivers/phy/amlogic/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o
obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o
obj-$(CONFIG_PHY_MESON_AXG_PCIE) += phy-meson-axg-pcie.o
obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o
+obj-$(CONFIG_PHY_MESON_AXG_MIPI_DPHY) += phy-meson-axg-mipi-dphy.o
diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
new file mode 100644
index 000000000000..cd2332bf0e31
--- /dev/null
+++ b/drivers/phy/amlogic/phy-meson-axg-mipi-dphy.c
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Meson AXG MIPI DPHY driver
+ *
+ * Copyright (C) 2018 Amlogic, Inc. All rights reserved
+ * Copyright (C) 2020 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@...libre.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* [31] soft reset for the phy.
+ * 1: reset. 0: dessert the reset.
+ * [30] clock lane soft reset.
+ * [29] data byte lane 3 soft reset.
+ * [28] data byte lane 2 soft reset.
+ * [27] data byte lane 1 soft reset.
+ * [26] data byte lane 0 soft reset.
+ * [25] mipi dsi pll clock selection.
+ * 1: clock from fixed 850Mhz clock source. 0: from VID2 PLL.
+ * [12] mipi HSbyteclk enable.
+ * [11] mipi divider clk selection.
+ * 1: select the mipi DDRCLKHS from clock divider.
+ * 0: from PLL clock.
+ * [10] mipi clock divider control.
+ * 1: /4. 0: /2.
+ * [9] mipi divider output enable.
+ * [8] mipi divider counter enable.
+ * [7] PLL clock enable.
+ * [5] LPDT data endian.
+ * 1 = transfer the high bit first. 0 : transfer the low bit first.
+ * [4] HS data endian.
+ * [3] force data byte lane in stop mode.
+ * [2] force data byte lane 0 in receiver mode.
+ * [1] write 1 to sync the txclkesc input. the internal logic have to
+ * use txclkesc to decide Txvalid and Txready.
+ * [0] enalbe the MIPI DPHY TxDDRClk.
+ */
+#define MIPI_DSI_PHY_CTRL 0x0
+
+/* [31] clk lane tx_hs_en control selection.
+ * 1: from register. 0: use clk lane state machine.
+ * [30] register bit for clock lane tx_hs_en.
+ * [29] clk lane tx_lp_en contrl selection.
+ * 1: from register. 0: from clk lane state machine.
+ * [28] register bit for clock lane tx_lp_en.
+ * [27] chan0 tx_hs_en control selection.
+ * 1: from register. 0: from chan0 state machine.
+ * [26] register bit for chan0 tx_hs_en.
+ * [25] chan0 tx_lp_en control selection.
+ * 1: from register. 0: from chan0 state machine.
+ * [24] register bit from chan0 tx_lp_en.
+ * [23] chan0 rx_lp_en control selection.
+ * 1: from register. 0: from chan0 state machine.
+ * [22] register bit from chan0 rx_lp_en.
+ * [21] chan0 contention detection enable control selection.
+ * 1: from register. 0: from chan0 state machine.
+ * [20] register bit from chan0 contention dectection enable.
+ * [19] chan1 tx_hs_en control selection.
+ * 1: from register. 0: from chan0 state machine.
+ * [18] register bit for chan1 tx_hs_en.
+ * [17] chan1 tx_lp_en control selection.
+ * 1: from register. 0: from chan0 state machine.
+ * [16] register bit from chan1 tx_lp_en.
+ * [15] chan2 tx_hs_en control selection.
+ * 1: from register. 0: from chan0 state machine.
+ * [14] register bit for chan2 tx_hs_en.
+ * [13] chan2 tx_lp_en control selection.
+ * 1: from register. 0: from chan0 state machine.
+ * [12] register bit from chan2 tx_lp_en.
+ * [11] chan3 tx_hs_en control selection.
+ * 1: from register. 0: from chan0 state machine.
+ * [10] register bit for chan3 tx_hs_en.
+ * [9] chan3 tx_lp_en control selection.
+ * 1: from register. 0: from chan0 state machine.
+ * [8] register bit from chan3 tx_lp_en.
+ * [4] clk chan power down. this bit is also used as the power down
+ * of the whole MIPI_DSI_PHY.
+ * [3] chan3 power down.
+ * [2] chan2 power down.
+ * [1] chan1 power down.
+ * [0] chan0 power down.
+ */
+#define MIPI_DSI_CHAN_CTRL 0x4
+
+/* [24] rx turn watch dog triggered.
+ * [23] rx esc watchdog triggered.
+ * [22] mbias ready.
+ * [21] txclkesc synced and ready.
+ * [20:17] clk lane state. {mbias_ready, tx_stop, tx_ulps, tx_hs_active}
+ * [16:13] chan3 state{0, tx_stop, tx_ulps, tx_hs_active}
+ * [12:9] chan2 state.{0, tx_stop, tx_ulps, tx_hs_active}
+ * [8:5] chan1 state. {0, tx_stop, tx_ulps, tx_hs_active}
+ * [4:0] chan0 state. {TX_STOP, tx_ULPS, hs_active, direction, rxulpsesc}
+ */
+#define MIPI_DSI_CHAN_STS 0x8
+
+/* [31:24] TCLK_PREPARE.
+ * [23:16] TCLK_ZERO.
+ * [15:8] TCLK_POST.
+ * [7:0] TCLK_TRAIL.
+ */
+#define MIPI_DSI_CLK_TIM 0xc
+
+/* [31:24] THS_PREPARE.
+ * [23:16] THS_ZERO.
+ * [15:8] THS_TRAIL.
+ * [7:0] THS_EXIT.
+ */
+#define MIPI_DSI_HS_TIM 0x10
+
+/* [31:24] tTA_GET.
+ * [23:16] tTA_GO.
+ * [15:8] tTA_SURE.
+ * [7:0] tLPX.
+ */
+#define MIPI_DSI_LP_TIM 0x14
+
+/* wait time to MIPI DIS analog ready. */
+#define MIPI_DSI_ANA_UP_TIM 0x18
+
+/* TINIT. */
+#define MIPI_DSI_INIT_TIM 0x1c
+
+/* TWAKEUP. */
+#define MIPI_DSI_WAKEUP_TIM 0x20
+
+/* when in RxULPS check state, after the the logic enable the analog,
+ * how long we should wait to check the lP state .
+ */
+#define MIPI_DSI_LPOK_TIM 0x24
+
+/* Watchdog for RX low power state no finished. */
+#define MIPI_DSI_LP_WCHDOG 0x28
+
+/* tMBIAS, after send power up signals to analog,
+ * how long we should wait for analog powered up.
+ */
+#define MIPI_DSI_ANA_CTRL 0x2c
+
+/* [31:8] reserved for future.
+ * [7:0] tCLK_PRE.
+ */
+#define MIPI_DSI_CLK_TIM1 0x30
+
+/* watchdog for turn around waiting time. */
+#define MIPI_DSI_TURN_WCHDOG 0x34
+
+/* When in RxULPS state, how frequency we should to check
+ * if the TX side out of ULPS state.
+ */
+#define MIPI_DSI_ULPS_CHECK 0x38
+#define MIPI_DSI_TEST_CTRL0 0x3c
+#define MIPI_DSI_TEST_CTRL1 0x40
+
+struct phy_meson_axg_mipi_dphy_priv {
+ struct device *dev;
+ struct regmap *regmap;
+ struct clk *clk;
+ struct reset_control *reset;
+ struct phy *analog;
+ struct phy_configure_opts_mipi_dphy config;
+};
+
+static const struct regmap_config phy_meson_axg_mipi_dphy_regmap_conf = {
+ .reg_bits = 8,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = MIPI_DSI_TEST_CTRL1,
+};
+
+static int phy_meson_axg_mipi_dphy_init(struct phy *phy)
+{
+ struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = phy_init(priv->analog);
+ if (ret)
+ return ret;
+
+ ret = reset_control_reset(priv->reset);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int phy_meson_axg_mipi_dphy_configure(struct phy *phy,
+ union phy_configure_opts *opts)
+{
+ struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = phy_mipi_dphy_config_validate(&opts->mipi_dphy);
+ if (ret)
+ return ret;
+
+ ret = phy_configure(priv->analog, opts);
+ if (ret)
+ return ret;
+
+ memcpy(&priv->config, opts, sizeof(priv->config));
+
+ return 0;
+}
+
+static int phy_meson_axg_mipi_dphy_power_on(struct phy *phy)
+{
+ struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+ unsigned long temp;
+
+ ret = phy_power_on(priv->analog);
+ if (ret)
+ return ret;
+
+ /* enable phy clock */
+ regmap_write(priv->regmap, MIPI_DSI_PHY_CTRL, 0x1);
+ regmap_write(priv->regmap, MIPI_DSI_PHY_CTRL,
+ BIT(0) | /* enable the DSI PLL clock . */
+ BIT(7) | /* enable pll clock which connected to DDR clock path */
+ BIT(8)); /* enable the clock divider counter */
+
+ /* enable the divider clock out */
+ regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(9), BIT(9));
+
+ /* enable the byte clock generation. */
+ regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(12), BIT(12));
+ regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(31), BIT(31));
+ regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(31), 0);
+
+ /* Calculate lanebyteclk period in ps */
+ temp = (1000000 * 100) / (priv->config.hs_clk_rate / 1000);
+ temp = temp * 8 * 10;
+
+ regmap_write(priv->regmap, MIPI_DSI_CLK_TIM,
+ DIV_ROUND_UP(priv->config.clk_trail, temp) |
+ (DIV_ROUND_UP(priv->config.clk_post +
+ priv->config.hs_trail, temp) << 8) |
+ (DIV_ROUND_UP(priv->config.clk_zero, temp) << 16) |
+ (DIV_ROUND_UP(priv->config.clk_prepare, temp) << 24));
+ regmap_write(priv->regmap, MIPI_DSI_CLK_TIM1,
+ DIV_ROUND_UP(priv->config.clk_pre, temp));
+
+ regmap_write(priv->regmap, MIPI_DSI_HS_TIM,
+ DIV_ROUND_UP(priv->config.hs_exit, temp) |
+ (DIV_ROUND_UP(priv->config.hs_trail, temp) << 8) |
+ (DIV_ROUND_UP(priv->config.hs_zero, temp) << 16) |
+ (DIV_ROUND_UP(priv->config.hs_prepare, temp) << 24));
+
+ regmap_write(priv->regmap, MIPI_DSI_LP_TIM,
+ DIV_ROUND_UP(priv->config.lpx, temp) |
+ (DIV_ROUND_UP(priv->config.ta_sure, temp) << 8) |
+ (DIV_ROUND_UP(priv->config.ta_go, temp) << 16) |
+ (DIV_ROUND_UP(priv->config.ta_get, temp) << 24));
+
+ regmap_write(priv->regmap, MIPI_DSI_ANA_UP_TIM, 0x0100);
+ regmap_write(priv->regmap, MIPI_DSI_INIT_TIM,
+ DIV_ROUND_UP(priv->config.init * NSEC_PER_MSEC, temp));
+ regmap_write(priv->regmap, MIPI_DSI_WAKEUP_TIM,
+ DIV_ROUND_UP(priv->config.wakeup * NSEC_PER_MSEC, temp));
+ regmap_write(priv->regmap, MIPI_DSI_LPOK_TIM, 0x7C);
+ regmap_write(priv->regmap, MIPI_DSI_ULPS_CHECK, 0x927C);
+ regmap_write(priv->regmap, MIPI_DSI_LP_WCHDOG, 0x1000);
+ regmap_write(priv->regmap, MIPI_DSI_TURN_WCHDOG, 0x1000);
+
+ /* Powerup the analog circuit */
+ switch (priv->config.lanes) {
+ case 1:
+ regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0xe);
+ break;
+ case 2:
+ regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0xc);
+ break;
+ case 3:
+ regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0x8);
+ break;
+ case 4:
+ default:
+ regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0);
+ break;
+ }
+
+ /* Trigger a sync active for esc_clk */
+ regmap_update_bits(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(1), BIT(1));
+
+ return 0;
+}
+
+static int phy_meson_axg_mipi_dphy_power_off(struct phy *phy)
+{
+ struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy);
+
+ regmap_write(priv->regmap, MIPI_DSI_CHAN_CTRL, 0xf);
+ regmap_write(priv->regmap, MIPI_DSI_PHY_CTRL, BIT(31));
+
+ phy_power_off(priv->analog);
+
+ return 0;
+}
+
+static int phy_meson_axg_mipi_dphy_exit(struct phy *phy)
+{
+ struct phy_meson_axg_mipi_dphy_priv *priv = phy_get_drvdata(phy);
+ int ret;
+
+ ret = phy_exit(priv->analog);
+ if (ret)
+ return ret;
+
+ return reset_control_reset(priv->reset);
+}
+
+static const struct phy_ops phy_meson_axg_mipi_dphy_ops = {
+ .configure = phy_meson_axg_mipi_dphy_configure,
+ .init = phy_meson_axg_mipi_dphy_init,
+ .exit = phy_meson_axg_mipi_dphy_exit,
+ .power_on = phy_meson_axg_mipi_dphy_power_on,
+ .power_off = phy_meson_axg_mipi_dphy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int phy_meson_axg_mipi_dphy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ struct phy_meson_axg_mipi_dphy_priv *priv;
+ struct phy *phy;
+ void __iomem *base;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ platform_set_drvdata(pdev, priv);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ priv->regmap = devm_regmap_init_mmio(dev, base,
+ &phy_meson_axg_mipi_dphy_regmap_conf);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ priv->clk = devm_clk_get(dev, "pclk");
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ priv->reset = devm_reset_control_get(dev, "phy");
+ if (IS_ERR(priv->reset))
+ return PTR_ERR(priv->reset);
+
+ priv->analog = devm_phy_get(dev, "analog");
+ if (IS_ERR(priv->analog))
+ return PTR_ERR(priv->analog);
+
+ ret = clk_prepare_enable(priv->clk);
+ if (ret)
+ return ret;
+
+ ret = reset_control_deassert(priv->reset);
+ if (ret)
+ return ret;
+
+ phy = devm_phy_create(dev, NULL, &phy_meson_axg_mipi_dphy_ops);
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to create PHY\n");
+
+ return ret;
+ }
+
+ phy_set_drvdata(phy, priv);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id phy_meson_axg_mipi_dphy_of_match[] = {
+ { .compatible = "amlogic,axg-mipi-dphy", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, phy_meson_axg_mipi_dphy_of_match);
+
+static struct platform_driver phy_meson_axg_mipi_dphy_driver = {
+ .probe = phy_meson_axg_mipi_dphy_probe,
+ .driver = {
+ .name = "phy-meson-axg-mipi-dphy",
+ .of_match_table = phy_meson_axg_mipi_dphy_of_match,
+ },
+};
+module_platform_driver(phy_meson_axg_mipi_dphy_driver);
+
+MODULE_AUTHOR("Neil Armstrong <narmstrong@...libre.com>");
+MODULE_DESCRIPTION("Meson AXG MIPI DPHY driver");
+MODULE_LICENSE("GPL v2");
--
2.25.1
Powered by blists - more mailing lists