| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201116161826.29417-6-johan@kernel.org>
Date: Mon, 16 Nov 2020 17:18:25 +0100
From: Johan Hovold <johan@...nel.org>
To: linux-usb@...r.kernel.org
Cc: Sheng Long Wang <shenglong.wang.ext@...mens.com>,
linux-kernel@...r.kernel.org, Johan Hovold <johan@...nel.org>
Subject: [PATCH 5/6] USB: serial: cp210x: refactor flow-control handling
Add a helper function to be used to configure flow control.
The flow-control code was the last caller that relied on the
memset-on-failure behaviour of cp210x_read_reg_block(), which we can now
drop in favour of bailing out on errors when retrieving the flow-control
settings.
This should also simplify adding support for software flow control.
Signed-off-by: Johan Hovold <johan@...nel.org>
---
drivers/usb/serial/cp210x.c | 97 ++++++++++++++++++-------------------
1 file changed, 47 insertions(+), 50 deletions(-)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 04d2b15ceded..c77fd09b91ce 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -555,14 +555,8 @@ static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
int result;
dmabuf = kmalloc(bufsize, GFP_KERNEL);
- if (!dmabuf) {
- /*
- * FIXME Some callers don't bother to check for error,
- * at least give them consistent junk until they are fixed
- */
- memset(buf, 0, bufsize);
+ if (!dmabuf)
return -ENOMEM;
- }
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
req, REQTYPE_INTERFACE_TO_HOST, 0,
@@ -576,12 +570,6 @@ static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
req, bufsize, result);
if (result >= 0)
result = -EIO;
-
- /*
- * FIXME Some callers don't bother to check for error,
- * at least give them consistent junk until they are fixed
- */
- memset(buf, 0, bufsize);
}
kfree(dmabuf);
@@ -1095,11 +1083,55 @@ static bool cp210x_termios_change(const struct ktermios *a, const struct ktermio
return tty_termios_hw_change(a, b) || iflag_change;
}
+static void cp210x_set_flow_control(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ struct cp210x_flow_ctl flow_ctl;
+ u32 flow_repl;
+ u32 ctl_hs;
+ int ret;
+
+ if (old_termios && C_CRTSCTS(tty) == (old_termios->c_cflag & CRTSCTS))
+ return;
+
+ ret = cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
+ sizeof(flow_ctl));
+ if (ret)
+ return;
+
+ ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
+ flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
+
+ ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE;
+ ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE;
+ ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY;
+ ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
+ ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE);
+
+ if (C_CRTSCTS(tty)) {
+ ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
+ flow_repl &= ~CP210X_SERIAL_RTS_MASK;
+ flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL);
+ } else {
+ ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
+ flow_repl &= ~CP210X_SERIAL_RTS_MASK;
+ flow_repl |= CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_ACTIVE);
+ }
+
+ dev_dbg(&port->dev, "%s - ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
+ __func__, ctl_hs, flow_repl);
+
+ flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
+ flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
+
+ cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
+ sizeof(flow_ctl));
+}
+
static void cp210x_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct cp210x_serial_private *priv = usb_get_serial_data(port->serial);
- struct device *dev = &port->dev;
u16 bits;
int ret;
@@ -1156,42 +1188,7 @@ static void cp210x_set_termios(struct tty_struct *tty,
if (ret)
dev_err(&port->dev, "failed to set line control: %d\n", ret);
- if (!old_termios || C_CRTSCTS(tty) != (old_termios->c_cflag & CRTSCTS)) {
- struct cp210x_flow_ctl flow_ctl;
- u32 ctl_hs;
- u32 flow_repl;
-
- cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl,
- sizeof(flow_ctl));
- ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
- flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
-
- ctl_hs &= ~CP210X_SERIAL_DSR_HANDSHAKE;
- ctl_hs &= ~CP210X_SERIAL_DCD_HANDSHAKE;
- ctl_hs &= ~CP210X_SERIAL_DSR_SENSITIVITY;
- ctl_hs &= ~CP210X_SERIAL_DTR_MASK;
- ctl_hs |= CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_ACTIVE);
- if (C_CRTSCTS(tty)) {
- ctl_hs |= CP210X_SERIAL_CTS_HANDSHAKE;
-
- flow_repl &= ~CP210X_SERIAL_RTS_MASK;
- flow_repl |= CP210X_SERIAL_RTS_SHIFT(
- CP210X_SERIAL_RTS_FLOW_CTL);
- } else {
- ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
-
- flow_repl &= ~CP210X_SERIAL_RTS_MASK;
- flow_repl |= CP210X_SERIAL_RTS_SHIFT(
- CP210X_SERIAL_RTS_ACTIVE);
- }
-
- dev_dbg(dev, "%s - ulControlHandshake=0x%08x, ulFlowReplace=0x%08x\n",
- __func__, ctl_hs, flow_repl);
- flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
- flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
- cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
- sizeof(flow_ctl));
- }
+ cp210x_set_flow_control(tty, port, old_termios);
/*
* Enable event-insertion mode only if input parity checking is
--
2.26.2
Powered by blists - more mailing lists