[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201117122125.648004832@linuxfoundation.org>
Date: Tue, 17 Nov 2020 14:05:17 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Jamie McClymont <jamie@...ius.com>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.4 087/151] pinctrl: intel: Set default bias in case no particular value given
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
[ Upstream commit f3c75e7a9349d1d33eb53ddc1b31640994969f73 ]
When GPIO library asks pin control to set the bias, it doesn't pass
any value of it and argument is considered boolean (and this is true
for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual
drivers must behave well, when they got the resistance value of 1 Ohm,
i.e. transforming it to sane default.
In case of Intel pin control hardware the 5 kOhm sounds plausible
because on one hand it's a minimum of resistors present in all
hardware generations and at the same time it's high enough to minimize
leakage current (will be only 200 uA with the above choice).
Fixes: e57725eabf87 ("pinctrl: intel: Add support for hardware debouncer")
Reported-by: Jamie McClymont <jamie@...ius.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/pinctrl/intel/pinctrl-intel.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 83981ad66a71e..4e89bbf6b76a0 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -662,6 +662,10 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin,
value |= PADCFG1_TERM_UP;
+ /* Set default strength value in case none is given */
+ if (arg == 1)
+ arg = 5000;
+
switch (arg) {
case 20000:
value |= PADCFG1_TERM_20K << PADCFG1_TERM_SHIFT;
@@ -684,6 +688,10 @@ static int intel_config_set_pull(struct intel_pinctrl *pctrl, unsigned int pin,
case PIN_CONFIG_BIAS_PULL_DOWN:
value &= ~(PADCFG1_TERM_UP | PADCFG1_TERM_MASK);
+ /* Set default strength value in case none is given */
+ if (arg == 1)
+ arg = 5000;
+
switch (arg) {
case 20000:
value |= PADCFG1_TERM_20K << PADCFG1_TERM_SHIFT;
--
2.27.0
Powered by blists - more mailing lists