Message-ID: <CACT4Y+a9vM-8FgUsQ60y8KHth9+9RQ2aV70QXCg3uLGkFJedmw@mail.gmail.com>
Date:   Tue, 17 Nov 2020 14:28:40 +0100
From:   Dmitry Vyukov <dvyukov@...gle.com>
To:     Marco Elver <elver@...gle.com>
Cc:     Andrey Konovalov <andreyknvl@...gle.com>,
        Andrew Morton <akpm@...ux-foundation.org>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        Vincenzo Frascino <vincenzo.frascino@....com>,
        Andrey Ryabinin <aryabinin@...tuozzo.com>,
        Alexander Potapenko <glider@...gle.com>,
        Evgenii Stepanov <eugenis@...gle.com>,
        Branislav Rankov <Branislav.Rankov@....com>,
        Kevin Brodsky <kevin.brodsky@....com>,
        kasan-dev <kasan-dev@...glegroups.com>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        Linux-MM <linux-mm@...ck.org>,
        LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH mm v3 19/19] kasan: update documentation

On Mon, Nov 16, 2020 at 4:47 PM Marco Elver <elver@...gle.com> wrote:
>
> On Fri, Nov 13, 2020 at 11:20PM +0100, Andrey Konovalov wrote:
> > This change updates KASAN documentation to reflect the addition of boot
> > parameters and also reworks and clarifies some of the existing sections,
> > in particular: defines what a memory granule is, mentions quarantine,
> > makes Kunit section more readable.
> >
> > Signed-off-by: Andrey Konovalov <andreyknvl@...gle.com>
> > Link: https://linux-review.googlesource.com/id/Ib1f83e91be273264b25f42b04448ac96b858849f
>
> Reviewed-by: Marco Elver <elver@...gle.com>

Reviewed-by: Dmitry Vyukov <dvyukov@...gle.com>

> > ---
> >  Documentation/dev-tools/kasan.rst | 186 +++++++++++++++++++-----------
> >  1 file changed, 116 insertions(+), 70 deletions(-)
> >
> > diff --git a/Documentation/dev-tools/kasan.rst b/Documentation/dev-tools/kasan.rst
> > index ffbae8ce5748..0d5d77919b1a 100644
> > --- a/Documentation/dev-tools/kasan.rst
> > +++ b/Documentation/dev-tools/kasan.rst
> > @@ -4,8 +4,9 @@ The Kernel Address Sanitizer (KASAN)
> >  Overview
> >  --------
> >
> > -KernelAddressSANitizer (KASAN) is a dynamic memory error detector designed to
> > -find out-of-bound and use-after-free bugs. KASAN has three modes:
> > +KernelAddressSANitizer (KASAN) is a dynamic memory safety error detector
> > +designed to find out-of-bound and use-after-free bugs. KASAN has three modes:
> > +
> >  1. generic KASAN (similar to userspace ASan),
> >  2. software tag-based KASAN (similar to userspace HWASan),
> >  3. hardware tag-based KASAN (based on hardware memory tagging).
> > @@ -39,23 +40,13 @@ CONFIG_KASAN_INLINE. Outline and inline are compiler instrumentation types.
> >  The former produces smaller binary while the latter is 1.1 - 2 times faster.
> >
> >  Both software KASAN modes work with both SLUB and SLAB memory allocators,
> > -hardware tag-based KASAN currently only support SLUB.
> > -For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
> > +while the hardware tag-based KASAN currently only support SLUB.
> > +
> > +For better error reports that include stack traces, enable CONFIG_STACKTRACE.
> >
> >  To augment reports with last allocation and freeing stack of the physical page,
> >  it is recommended to enable also CONFIG_PAGE_OWNER and boot with page_owner=on.
> >
> > -To disable instrumentation for specific files or directories, add a line
> > -similar to the following to the respective kernel Makefile:
> > -
> > -- For a single file (e.g. main.o)::
> > -
> > -    KASAN_SANITIZE_main.o := n
> > -
> > -- For all files in one directory::
> > -
> > -    KASAN_SANITIZE := n
> > -
> >  Error reports
> >  ~~~~~~~~~~~~~
> >
> > @@ -140,22 +131,75 @@ freed (in case of a use-after-free bug report). Next comes a description of
> >  the accessed slab object and information about the accessed memory page.
> >
> >  In the last section the report shows memory state around the accessed address.
> > -Reading this part requires some understanding of how KASAN works.
> > -
> > -The state of each 8 aligned bytes of memory is encoded in one shadow byte.
> > -Those 8 bytes can be accessible, partially accessible, freed or be a redzone.
> > -We use the following encoding for each shadow byte: 0 means that all 8 bytes
> > -of the corresponding memory region are accessible; number N (1 <= N <= 7) means
> > -that the first N bytes are accessible, and other (8 - N) bytes are not;
> > -any negative value indicates that the entire 8-byte word is inaccessible.
> > -We use different negative values to distinguish between different kinds of
> > -inaccessible memory like redzones or freed memory (see mm/kasan/kasan.h).
> > +Internally KASAN tracks memory state separately for each memory granule, which
> > +is either 8 or 16 aligned bytes depending on KASAN mode. Each number in the
> > +memory state section of the report shows the state of one of the memory
> > +granules that surround the accessed address.
> > +
> > +For generic KASAN the size of each memory granule is 8. The state of each
> > +granule is encoded in one shadow byte. Those 8 bytes can be accessible,
> > +partially accessible, freed or be a part of a redzone. KASAN uses the following
> > +encoding for each shadow byte: 0 means that all 8 bytes of the corresponding
> > +memory region are accessible; number N (1 <= N <= 7) means that the first N
> > +bytes are accessible, and other (8 - N) bytes are not; any negative value
> > +indicates that the entire 8-byte word is inaccessible. KASAN uses different
> > +negative values to distinguish between different kinds of inaccessible memory
> > +like redzones or freed memory (see mm/kasan/kasan.h).
> >
> >  In the report above the arrows point to the shadow byte 03, which means that
> >  the accessed address is partially accessible.
> >
> >  For tag-based KASAN this last report section shows the memory tags around the
> > -accessed address (see Implementation details section).
> > +accessed address (see `Implementation details`_ section).
> > +
> > +Boot parameters
> > +~~~~~~~~~~~~~~~
> > +
> > +Hardware tag-based KASAN mode (see the section about different mode below) is
> > +intended for use in production as a security mitigation. Therefore it supports
> > +boot parameters that allow to disable KASAN competely or otherwise control
> > +particular KASAN features.
> > +
> > +The things that can be controlled are:
> > +
> > +1. Whether KASAN is enabled at all.
> > +2. Whether KASAN collects and saves alloc/free stacks.
> > +3. Whether KASAN panics on a detected bug or not.
> > +
> > +The ``kasan.mode`` boot parameter allows to choose one of three main modes:
> > +
> > +- ``kasan.mode=off`` - KASAN is disabled, no tag checks are performed
> > +- ``kasan.mode=prod`` - only essential production features are enabled
> > +- ``kasan.mode=full`` - all KASAN features are enabled
> > +
> > +The chosen mode provides default control values for the features mentioned
> > +above. However it's also possible to override the default values by providing:
> > +
> > +- ``kasan.stacktrace=off`` or ``=on`` - enable alloc/free stack collection
> > +                                     (default: ``on`` for ``mode=full``,
> > +                                      otherwise ``off``)
> > +- ``kasan.fault=report`` or ``=panic`` - only print KASAN report or also panic
> > +                                      (default: ``report``)
> > +
> > +If ``kasan.mode`` parameter is not provided, it defaults to ``full`` when
> > +``CONFIG_DEBUG_KERNEL`` is enabled, and to ``prod`` otherwise.
> > +
> > +For developers
> > +~~~~~~~~~~~~~~
> > +
> > +Software KASAN modes use compiler instrumentation to insert validity checks.
> > +Such instrumentation might be incompatible with some part of the kernel, and
> > +therefore needs to be disabled. To disable instrumentation for specific files
> > +or directories, add a line similar to the following to the respective kernel
> > +Makefile:
> > +
> > +- For a single file (e.g. main.o)::
> > +
> > +    KASAN_SANITIZE_main.o := n
> > +
> > +- For all files in one directory::
> > +
> > +    KASAN_SANITIZE := n
> >
> >
> >  Implementation details
> > @@ -164,10 +208,10 @@ Implementation details
> >  Generic KASAN
> >  ~~~~~~~~~~~~~
> >
> > -From a high level, our approach to memory error detection is similar to that
> > -of kmemcheck: use shadow memory to record whether each byte of memory is safe
> > -to access, and use compile-time instrumentation to insert checks of shadow
> > -memory on each memory access.
> > +From a high level perspective, KASAN's approach to memory error detection is
> > +similar to that of kmemcheck: use shadow memory to record whether each byte of
> > +memory is safe to access, and use compile-time instrumentation to insert checks
> > +of shadow memory on each memory access.
> >
> >  Generic KASAN dedicates 1/8th of kernel memory to its shadow memory (e.g. 16TB
> >  to cover 128TB on x86_64) and uses direct mapping with a scale and offset to
> > @@ -194,7 +238,10 @@ function calls GCC directly inserts the code to check the shadow memory.
> >  This option significantly enlarges kernel but it gives x1.1-x2 performance
> >  boost over outline instrumented kernel.
> >
> > -Generic KASAN prints up to 2 call_rcu() call stacks in reports, the last one
> > +Generic KASAN is the only mode that delays the reuse of freed object via
> > +quarantine (see mm/kasan/quarantine.c for implementation).
> > +
> > +Generic KASAN prints up to two call_rcu() call stacks in reports, the last one
> >  and the second to last.
> >
> >  Software tag-based KASAN
> > @@ -304,15 +351,15 @@ therefore be wasteful. Furthermore, to ensure that different mappings
> >  use different shadow pages, mappings would have to be aligned to
> >  ``KASAN_GRANULE_SIZE * PAGE_SIZE``.
> >
> > -Instead, we share backing space across multiple mappings. We allocate
> > +Instead, KASAN shares backing space across multiple mappings. It allocates
> >  a backing page when a mapping in vmalloc space uses a particular page
> >  of the shadow region. This page can be shared by other vmalloc
> >  mappings later on.
> >
> > -We hook in to the vmap infrastructure to lazily clean up unused shadow
> > +KASAN hooks into the vmap infrastructure to lazily clean up unused shadow
> >  memory.
> >
> > -To avoid the difficulties around swapping mappings around, we expect
> > +To avoid the difficulties around swapping mappings around, KASAN expects
> >  that the part of the shadow region that covers the vmalloc space will
> >  not be covered by the early shadow page, but will be left
> >  unmapped. This will require changes in arch-specific code.
> > @@ -323,24 +370,31 @@ architectures that do not have a fixed module region.
> >  CONFIG_KASAN_KUNIT_TEST & CONFIG_TEST_KASAN_MODULE
> >  --------------------------------------------------
> >
> > -``CONFIG_KASAN_KUNIT_TEST`` utilizes the KUnit Test Framework for testing.
> > -This means each test focuses on a small unit of functionality and
> > -there are a few ways these tests can be run.
> > +KASAN tests consist on two parts:
> > +
> > +1. Tests that are integrated with the KUnit Test Framework. Enabled with
> > +``CONFIG_KASAN_KUNIT_TEST``. These tests can be run and partially verified
> > +automatically in a few different ways, see the instructions below.
> >
> > -Each test will print the KASAN report if an error is detected and then
> > -print the number of the test and the status of the test:
> > +2. Tests that are currently incompatible with KUnit. Enabled with
> > +``CONFIG_TEST_KASAN_MODULE`` and can only be run as a module. These tests can
> > +only be verified manually, by loading the kernel module and inspecting the
> > +kernel log for KASAN reports.
> >
> > -pass::
> > +Each KUnit-compatible KASAN test prints a KASAN report if an error is detected.
> > +Then the test prints its number and status.
> > +
> > +When a test passes::
> >
> >          ok 28 - kmalloc_double_kzfree
> >
> > -or, if kmalloc failed::
> > +When a test fails due to a failed ``kmalloc``::
> >
> >          # kmalloc_large_oob_right: ASSERTION FAILED at lib/test_kasan.c:163
> >          Expected ptr is not null, but is
> >          not ok 4 - kmalloc_large_oob_right
> >
> > -or, if a KASAN report was expected, but not found::
> > +When a test fails due to a missing KASAN report::
> >
> >          # kmalloc_double_kzfree: EXPECTATION FAILED at lib/test_kasan.c:629
> >          Expected kasan_data->report_expected == kasan_data->report_found, but
> > @@ -348,46 +402,38 @@ or, if a KASAN report was expected, but not found::
> >          kasan_data->report_found == 0
> >          not ok 28 - kmalloc_double_kzfree
> >
> > -All test statuses are tracked as they run and an overall status will
> > -be printed at the end::
> > +At the end the cumulative status of all KASAN tests is printed. On success::
> >
> >          ok 1 - kasan
> >
> > -or::
> > +Or, if one of the tests failed::
> >
> >          not ok 1 - kasan
> >
> > -(1) Loadable Module
> > -~~~~~~~~~~~~~~~~~~~~
> > +
> > +There are a few ways to run KUnit-compatible KASAN tests.
> > +
> > +1. Loadable module
> > +~~~~~~~~~~~~~~~~~~
> >
> >  With ``CONFIG_KUNIT`` enabled, ``CONFIG_KASAN_KUNIT_TEST`` can be built as
> > -a loadable module and run on any architecture that supports KASAN
> > -using something like insmod or modprobe. The module is called ``test_kasan``.
> > +a loadable module and run on any architecture that supports KASAN by loading
> > +the module with insmod or modprobe. The module is called ``test_kasan``.
> >
> > -(2) Built-In
> > -~~~~~~~~~~~~~
> > +2. Built-In
> > +~~~~~~~~~~~
> >
> >  With ``CONFIG_KUNIT`` built-in, ``CONFIG_KASAN_KUNIT_TEST`` can be built-in
> > -on any architecure that supports KASAN. These and any other KUnit
> > -tests enabled will run and print the results at boot as a late-init
> > -call.
> > +on any architecure that supports KASAN. These and any other KUnit tests enabled
> > +will run and print the results at boot as a late-init call.
> >
> > -(3) Using kunit_tool
> > -~~~~~~~~~~~~~~~~~~~~~
> > +3. Using kunit_tool
> > +~~~~~~~~~~~~~~~~~~~
> >
> > -With ``CONFIG_KUNIT`` and ``CONFIG_KASAN_KUNIT_TEST`` built-in, we can also
> > -use kunit_tool to see the results of these along with other KUnit
> > -tests in a more readable way. This will not print the KASAN reports
> > -of tests that passed. Use `KUnit documentation <https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html>`_ for more up-to-date
> > -information on kunit_tool.
> > +With ``CONFIG_KUNIT`` and ``CONFIG_KASAN_KUNIT_TEST`` built-in, it's also
> > +possible use ``kunit_tool`` to see the results of these and other KUnit tests
> > +in a more readable way. This will not print the KASAN reports of the tests that
> > +passed. Use `KUnit documentation <https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html>`_
> > +for more up-to-date information on ``kunit_tool``.
> >
> >  .. _KUnit: https://www.kernel.org/doc/html/latest/dev-tools/kunit/index.html
> > -
> > -``CONFIG_TEST_KASAN_MODULE`` is a set of KASAN tests that could not be
> > -converted to KUnit. These tests can be run only as a module with
> > -``CONFIG_TEST_KASAN_MODULE`` built as a loadable module and
> > -``CONFIG_KASAN`` built-in. The type of error expected and the
> > -function being run is printed before the expression expected to give
> > -an error. Then the error is printed, if found, and that test
> > -should be interpretted to pass only if the error was the one expected
> > -by the test.
> > --
> > 2.29.2.299.gdc1121823c-goog
> >

Powered by blists - more mailing lists