| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201117161942.38754-3-nsekhar@ti.com>
Date: Tue, 17 Nov 2020 21:49:40 +0530
From: Sekhar Nori <nsekhar@...com>
To: Nishanth Menon <nm@...com>, Tero Kristo <t-kristo@...com>
CC: Linux ARM Mailing List <linux-arm-kernel@...ts.infradead.org>,
Device Tree Mailing List <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, Rob Herring <robh+dt@...nel.org>,
Faiz Abbas <faiz_abbas@...com>,
Grygorii Strashko <grygorii.strashko@...com>,
Lokesh Vutla <lokeshvutla@...com>,
Andre Przywara <andre.przywara@....com>
Subject: [PATCH v2 2/4] arm64: dts: ti: k3: squelch warnings regarding no #address-cells for interrupt-controller
With dtc 1.6.0, building TI device-tree files with W=2 results in warnings
like below for all interrupt controllers.
/bus@...000/bus@...00000/interrupt-controller1: Missing #address-cells in interrupt provider
Fix these by adding #address-cells = <0>; for all interrupt controllers in
TI device-tree files. Any other #address-cells value is really only needed
if interrupt-map property is being used (which is not the case for existing
TI device-tree files)
Signed-off-by: Sekhar Nori <nsekhar@...com>
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 +++++
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 ++
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 1 +
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 3 +++
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 1 +
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 11 +++++++++++
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 3 +++
8 files changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index aa8725db0187..55aaa1404d7d 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -440,6 +440,7 @@
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <100>;
ti,interrupt-ranges = <0 392 32>;
@@ -461,6 +462,7 @@
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <182>;
ti,interrupt-ranges = <0 64 64>,
@@ -474,6 +476,7 @@
interrupt-parent = <&intr_main_navss>;
msi-controller;
#interrupt-cells = <0>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <179>;
ti,interrupt-ranges = <0 0 256>;
@@ -670,6 +673,7 @@
interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <96>;
ti,davinci-gpio-unbanked = <0>;
clocks = <&k3_clks 57 0>;
@@ -685,6 +689,7 @@
interrupts = <200>, <201>, <202>, <203>, <204>, <205>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <90>;
ti,davinci-gpio-unbanked = <0>;
clocks = <&k3_clks 58 0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index ed42f13e7663..7fe5782a1f79 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -75,6 +75,7 @@
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <156>;
ti,interrupt-ranges = <0 712 16>;
@@ -89,6 +90,7 @@
interrupts = <60>, <61>, <62>, <63>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <56>;
ti,davinci-gpio-unbanked = <0>;
clocks = <&k3_clks 59 0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index d12dd89f3405..376de272cb4e 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -236,6 +236,7 @@
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 72d6496e88dd..d07081b20aee 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -67,6 +67,7 @@
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <131>;
ti,interrupt-ranges = <8 392 56>;
@@ -85,6 +86,7 @@
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <213>;
ti,interrupt-ranges = <0 64 64>,
@@ -97,6 +99,7 @@
reg = <0x00 0x33d00000 0x00 0x100000>;
interrupt-controller;
#interrupt-cells = <0>;
+ #address-cells = <0>;
interrupt-parent = <&main_navss_intr>;
msi-controller;
ti,sci = <&dmsc>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index eb2a78a53512..4801876bd107 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -102,6 +102,7 @@
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <137>;
ti,interrupt-ranges = <16 960 16>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 52e121155563..0490cb15f0c9 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -442,6 +442,7 @@
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
};
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index ffedd9531362..7f44692e15ec 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -114,6 +114,7 @@
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <131>;
ti,interrupt-ranges = <8 392 56>;
@@ -135,6 +136,7 @@
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <213>;
ti,interrupt-ranges = <0 64 64>,
@@ -149,6 +151,7 @@
interrupt-parent = <&main_navss_intr>;
msi-controller;
#interrupt-cells = <0>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <209>;
ti,interrupt-ranges = <0 0 256>;
@@ -948,6 +951,7 @@
<260>, <261>, <262>, <263>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
@@ -964,6 +968,7 @@
interrupts = <288>, <289>, <290>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
@@ -981,6 +986,7 @@
<268>, <269>, <270>, <271>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
@@ -997,6 +1003,7 @@
interrupts = <292>, <293>, <294>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
@@ -1014,6 +1021,7 @@
<276>, <277>, <278>, <279>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
@@ -1030,6 +1038,7 @@
interrupts = <296>, <297>, <298>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
@@ -1047,6 +1056,7 @@
<284>, <285>, <286>, <287>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
@@ -1063,6 +1073,7 @@
interrupts = <300>, <301>, <302>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index e581cb1d87ee..ed3098ed7b56 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -102,6 +102,7 @@
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <137>;
ti,interrupt-ranges = <16 960 16>;
@@ -116,6 +117,7 @@
interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <84>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
@@ -132,6 +134,7 @@
interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <84>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
--
2.17.1
Powered by blists - more mailing lists