| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201117191954.1322844-14-sean.v.kelley@intel.com>
Date: Tue, 17 Nov 2020 11:19:51 -0800
From: Sean V Kelley <sean.v.kelley@...el.com>
To: bhelgaas@...gle.com, Jonathan.Cameron@...wei.com,
xerces.zhao@...il.com, rafael.j.wysocki@...el.com,
ashok.raj@...el.com, tony.luck@...el.com,
sathyanarayanan.kuppuswamy@...el.com, qiuxu.zhuo@...el.com
Cc: linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
Sean V Kelley <sean.v.kelley@...el.com>
Subject: [PATCH v11 13/16] PCI/RCEC: Add RCiEP's linked RCEC to AER/ERR
From: Qiuxu Zhuo <qiuxu.zhuo@...el.com>
When attempting error recovery for an RCiEP associated with an RCEC device,
there needs to be a way to update the Root Error Status, the Uncorrectable
Error Status and the Uncorrectable Error Severity of the parent RCEC. In
some non-native cases in which there is no OS-visible device associated
with the RCiEP, there is nothing to act upon as the firmware is acting
before the OS.
Add handling for the linked RCEC in AER/ERR while taking into account
non-native cases.
Co-developed-by: Sean V Kelley <sean.v.kelley@...el.com>
Link: https://lore.kernel.org/r/20201002184735.1229220-12-seanvk.dev@oregontracks.org
Signed-off-by: Sean V Kelley <sean.v.kelley@...el.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@...el.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@...gle.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
---
drivers/pci/pcie/aer.c | 46 +++++++++++++++++++++++++++++++-----------
drivers/pci/pcie/err.c | 20 +++++++++---------
2 files changed, 44 insertions(+), 22 deletions(-)
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 6fe2d4ef0635..2869212af8b4 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1357,29 +1357,51 @@ static int aer_probe(struct pcie_device *dev)
*/
static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
{
- int aer = dev->aer_cap;
+ int type = pci_pcie_type(dev);
+ struct pci_dev *root;
+ int aer = 0;
+ int rc = 0;
u32 reg32;
- int rc;
- if (pcie_aer_is_native(dev)) {
+ if (type == PCI_EXP_TYPE_RC_END)
+ /*
+ * The reset should only clear the Root Error Status
+ * of the RCEC. Only perform this for the
+ * native case, i.e., an RCEC is present.
+ */
+ root = dev->rcec;
+ else
+ root = dev;
+
+ if (root)
+ aer = dev->aer_cap;
+
+ if ((aer) && pcie_aer_is_native(dev)) {
/* Disable Root's interrupt in response to error messages */
- pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, ®32);
+ pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, ®32);
reg32 &= ~ROOT_PORT_INTR_ON_MESG_MASK;
- pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+ pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
}
- rc = pci_bus_error_reset(dev);
- pci_info(dev, "Root Port link has been reset (%d)\n", rc);
+ if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
+ if (pcie_has_flr(dev)) {
+ rc = pcie_flr(dev);
+ pci_info(dev, "has been reset (%d)\n", rc);
+ }
+ } else {
+ rc = pci_bus_error_reset(dev);
+ pci_info(dev, "Root Port link has been reset (%d)\n", rc);
+ }
- if (pcie_aer_is_native(dev)) {
+ if ((aer) && pcie_aer_is_native(dev)) {
/* Clear Root Error Status */
- pci_read_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, ®32);
- pci_write_config_dword(dev, aer + PCI_ERR_ROOT_STATUS, reg32);
+ pci_read_config_dword(root, aer + PCI_ERR_ROOT_STATUS, ®32);
+ pci_write_config_dword(root, aer + PCI_ERR_ROOT_STATUS, reg32);
/* Enable Root Port's interrupt in response to error messages */
- pci_read_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, ®32);
+ pci_read_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, ®32);
reg32 |= ROOT_PORT_INTR_ON_MESG_MASK;
- pci_write_config_dword(dev, aer + PCI_ERR_ROOT_COMMAND, reg32);
+ pci_write_config_dword(root, aer + PCI_ERR_ROOT_COMMAND, reg32);
}
return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 7883c9791562..cbc5abfe767b 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -148,10 +148,10 @@ static int report_resume(struct pci_dev *dev, void *data)
/**
* pci_walk_bridge - walk bridges potentially AER affected
- * @bridge: bridge which may be a Port, an RCEC with associated RCiEPs,
- * or an RCiEP associated with an RCEC
- * @cb: callback to be called for each device found
- * @userdata: arbitrary pointer to be passed to callback
+ * @bridge bridge which may be an RCEC with associated RCiEPs,
+ * or a Port.
+ * @cb callback to be called for each device found
+ * @userdata arbitrary pointer to be passed to callback.
*
* If the device provided is a bridge, walk the subordinate bus, including
* any bridged devices on buses under this bus. Call the provided callback
@@ -164,8 +164,14 @@ static void pci_walk_bridge(struct pci_dev *bridge,
int (*cb)(struct pci_dev *, void *),
void *userdata)
{
+ /*
+ * In a non-native case where there is no OS-visible reporting
+ * device the bridge will be NULL, i.e., no RCEC, no Downstream Port.
+ */
if (bridge->subordinate)
pci_walk_bus(bridge->subordinate, cb, userdata);
+ else if (bridge->rcec)
+ cb(bridge->rcec, userdata);
else
cb(bridge, userdata);
}
@@ -194,12 +200,6 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
pci_dbg(bridge, "broadcast error_detected message\n");
if (state == pci_channel_io_frozen) {
pci_walk_bridge(bridge, report_frozen_detected, &status);
- if (type == PCI_EXP_TYPE_RC_END) {
- pci_warn(dev, "subordinate device reset not possible for RCiEP\n");
- status = PCI_ERS_RESULT_NONE;
- goto failed;
- }
-
status = reset_subordinates(bridge);
if (status != PCI_ERS_RESULT_RECOVERED) {
pci_warn(bridge, "subordinate device reset failed\n");
--
2.29.2
Powered by blists - more mailing lists