linux-kernel - Re: [PATCH v5 4/4] media: i2c: imx258: get clock from device properties and enable it via runtime PM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20201118202036.GA5631@kozik-lap>
Date:   Wed, 18 Nov 2020 21:27:10 +0100
From:   Krzysztof Kozlowski <krzk@...nel.org>
To:     Sakari Ailus <sakari.ailus@...ux.intel.com>
Cc:     Mauro Carvalho Chehab <mchehab@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        linux-media@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v5 4/4] media: i2c: imx258: get clock from device
 properties and enable it via runtime PM

On Mon, Nov 02, 2020 at 05:08:47PM +0200, Sakari Ailus wrote:
> Hi Krysztof,
> 
> On Mon, Oct 19, 2020 at 07:26:17PM +0200, Krzysztof Kozlowski wrote:
> > The IMX258 sensor driver checked in device properties for a
> > clock-frequency property which actually does not mean that the clock is
> > really running such frequency or is it even enabled.
> > 
> > Get the provided clock and check it frequency.  If none is provided,
> > fall back to old property.
> > 
> > Enable the clock when accessing the IMX258 registers and when streaming
> > starts with runtime PM.
> > 
> > Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
> > 
> > ---
> > 
> > Changes since v4:
> > 1. Add missing imx258_power_off.
> > 
> > Changes since v3:
> > 1. None
> > 
> > Changes since v2:
> > 1. Do not try to set drvdata, wrap lines.
> > 2. Use dev_dbg.
> > 
> > Changes since v1:
> > 1. Use runtime PM for clock toggling
> > ---
> >  drivers/media/i2c/imx258.c | 73 +++++++++++++++++++++++++++++++++-----
> >  1 file changed, 64 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
> > index ae183b0dbba9..038115471f17 100644
> > --- a/drivers/media/i2c/imx258.c
> > +++ b/drivers/media/i2c/imx258.c
> > @@ -2,6 +2,7 @@
> >  // Copyright (C) 2018 Intel Corporation
> >  
> >  #include <linux/acpi.h>
> > +#include <linux/clk.h>
> >  #include <linux/delay.h>
> >  #include <linux/i2c.h>
> >  #include <linux/module.h>
> > @@ -68,6 +69,9 @@
> >  #define REG_CONFIG_MIRROR_FLIP		0x03
> >  #define REG_CONFIG_FLIP_TEST_PATTERN	0x02
> >  
> > +/* Input clock frequency in Hz */
> > +#define IMX258_INPUT_CLOCK_FREQ		19200000
> > +
> >  struct imx258_reg {
> >  	u16 address;
> >  	u8 val;
> > @@ -610,6 +614,8 @@ struct imx258 {
> >  
> >  	/* Streaming on/off */
> >  	bool streaming;
> > +
> > +	struct clk *clk;
> >  };
> >  
> >  static inline struct imx258 *to_imx258(struct v4l2_subdev *_sd)
> > @@ -972,6 +978,29 @@ static int imx258_stop_streaming(struct imx258 *imx258)
> >  	return 0;
> >  }
> >  
> > +static int imx258_power_on(struct device *dev)
> > +{
> > +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > +	struct imx258 *imx258 = to_imx258(sd);
> > +	int ret;
> > +
> > +	ret = clk_prepare_enable(imx258->clk);
> > +	if (ret)
> > +		dev_err(dev, "failed to enable clock\n");
> > +
> > +	return ret;
> > +}
> > +
> > +static int imx258_power_off(struct device *dev)
> > +{
> > +	struct v4l2_subdev *sd = dev_get_drvdata(dev);
> > +	struct imx258 *imx258 = to_imx258(sd);
> > +
> > +	clk_disable_unprepare(imx258->clk);
> > +
> > +	return 0;
> > +}
> > +
> >  static int imx258_set_stream(struct v4l2_subdev *sd, int enable)
> >  {
> >  	struct imx258 *imx258 = to_imx258(sd);
> > @@ -1199,9 +1228,28 @@ static int imx258_probe(struct i2c_client *client)
> >  	int ret;
> >  	u32 val = 0;
> >  
> > -	device_property_read_u32(&client->dev, "clock-frequency", &val);
> > -	if (val != 19200000)
> > -		return -EINVAL;
> > +	imx258 = devm_kzalloc(&client->dev, sizeof(*imx258), GFP_KERNEL);
> > +	if (!imx258)
> > +		return -ENOMEM;
> > +
> > +	imx258->clk = devm_clk_get_optional(&client->dev, NULL);
> > +	if (!imx258->clk) {
> > +		dev_dbg(&client->dev,
> > +			"no clock provided, using clock-frequency property\n");
> > +
> > +		device_property_read_u32(&client->dev, "clock-frequency", &val);
> > +		if (val != IMX258_INPUT_CLOCK_FREQ)
> > +			return -EINVAL;
> > +	} else if (IS_ERR(imx258->clk)) {
> > +		return dev_err_probe(&client->dev, PTR_ERR(imx258->clk),
> > +				     "error getting clock\n");
> > +	} else {
> > +		if (clk_get_rate(imx258->clk) != IMX258_INPUT_CLOCK_FREQ) {
> 
> Please move the check outside the conditional block. May be a separate
> patch if you like.

OK

Best regards,
Krzysztof