[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <00368490-8e55-2d21-2150-bc80f63dedf9@codeaurora.org>
Date: Wed, 18 Nov 2020 13:07:42 -0800
From: Mike Tipton <mdtipton@...eaurora.org>
To: Georgi Djakov <georgi.djakov@...aro.org>,
bjorn.andersson@...aro.org, linux-pm@...r.kernel.org
Cc: linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] interconnect: qcom: qcs404: Remove GPU and display RPM
IDs
On 11/18/2020 3:10 AM, Georgi Djakov wrote:
> The following errors are noticed during boot on a QCS404 board:
> [ 2.926647] qcom_icc_rpm_smd_send mas 6 error -6
> [ 2.934573] qcom_icc_rpm_smd_send mas 8 error -6
>
> These errors show when we try to configure the GPU and display nodes.
> Since these particular nodes aren't supported on RPM and are purely
> local, we should just change their mas_rpm_id to -1 to avoid any
> requests being sent for these master IDs.
>
> Signed-off-by: Georgi Djakov <georgi.djakov@...aro.org>
Reviewed-by: Mike Tipton <mdtipton@...eaurora.org>
> ---
>
> v2:
> * Keep the nodes and just set the IDs to -1, as suggested by Mike.
>
> v1: http://lore.kernel.org/r/20201111100734.307-1-georgi.djakov@linaro.org
>
> drivers/interconnect/qcom/qcs404.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/interconnect/qcom/qcs404.c b/drivers/interconnect/qcom/qcs404.c
> index d4769a5ea182..9820709b43db 100644
> --- a/drivers/interconnect/qcom/qcs404.c
> +++ b/drivers/interconnect/qcom/qcs404.c
> @@ -157,8 +157,8 @@ struct qcom_icc_desc {
> }
>
> DEFINE_QNODE(mas_apps_proc, QCS404_MASTER_AMPSS_M0, 8, 0, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
> -DEFINE_QNODE(mas_oxili, QCS404_MASTER_GRAPHICS_3D, 8, 6, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
> -DEFINE_QNODE(mas_mdp, QCS404_MASTER_MDP_PORT0, 8, 8, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
> +DEFINE_QNODE(mas_oxili, QCS404_MASTER_GRAPHICS_3D, 8, -1, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
> +DEFINE_QNODE(mas_mdp, QCS404_MASTER_MDP_PORT0, 8, -1, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
> DEFINE_QNODE(mas_snoc_bimc_1, QCS404_SNOC_BIMC_1_MAS, 8, 76, -1, QCS404_SLAVE_EBI_CH0);
> DEFINE_QNODE(mas_tcu_0, QCS404_MASTER_TCU_0, 8, -1, -1, QCS404_SLAVE_EBI_CH0, QCS404_BIMC_SNOC_SLV);
> DEFINE_QNODE(mas_spdm, QCS404_MASTER_SPDM, 4, -1, -1, QCS404_PNOC_INT_3);
>
Powered by blists - more mailing lists