linux-kernel - Re: [PATCH 3/3] arm64: dts: ti: k3-j721e-main: Remove "syscon" nodes added for pcieX

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201118211426.GB1815279@bogus>
Date:   Wed, 18 Nov 2020 15:14:26 -0600
From:   Rob Herring <robh@...nel.org>
To:     Kishon Vijay Abraham I <kishon@...com>
Cc:     Tero Kristo <t-kristo@...com>, Nishanth Menon <nm@...com>,
        Tom Joseph <tjoseph@...ence.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
        Bjorn Helgaas <bhelgaas@...gle.com>,
        linux-omap@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-pci@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: ti: k3-j721e-main: Remove "syscon" nodes
 added for pcieX_ctrl

On Mon, Nov 16, 2020 at 11:01:41PM +0530, Kishon Vijay Abraham I wrote:
> Remove "syscon" nodes added for pcieX_ctrl and have the PCIe node
> point to the parent with an offset argument.

This should say breaks compatibility, but that fine because ????. It 
only landed in 5.9 and a new platform I suppose. 

> 
> Link: http://lore.kernel.org/r/CAL_JsqKiUcO76bo1GoepWM1TusJWoty_BRy2hFSgtEVMqtrvvQ@mail.gmail.com

Should have a Fixes tag IMO.

> Signed-off-by: Kishon Vijay Abraham I <kishon@...com>
> ---
>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 48 ++++-------------------
>  1 file changed, 8 insertions(+), 40 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> index 620e69e42974..23a0024dda79 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
> @@ -28,38 +28,6 @@
>  		#size-cells = <1>;
>  		ranges = <0x0 0x0 0x00100000 0x1c000>;
>  
> -		pcie0_ctrl: syscon@...0 {
> -			compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> -			reg = <0x00004070 0x4>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> -			ranges = <0x4070 0x4070 0x4>;
> -		};
> -
> -		pcie1_ctrl: syscon@...4 {
> -			compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> -			reg = <0x00004074 0x4>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> -			ranges = <0x4074 0x4074 0x4>;
> -		};
> -
> -		pcie2_ctrl: syscon@...8 {
> -			compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> -			reg = <0x00004078 0x4>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> -			ranges = <0x4078 0x4078 0x4>;
> -		};
> -
> -		pcie3_ctrl: syscon@...c {
> -			compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
> -			reg = <0x0000407c 0x4>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> -			ranges = <0x407c 0x407c 0x4>;
> -		};
> -
>  		serdes_ln_ctrl: mux@...0 {
>  			compatible = "mmio-mux";
>  			reg = <0x00004080 0x50>;
> @@ -619,7 +587,7 @@
>  		interrupt-names = "link_state";
>  		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
>  		device_type = "pci";
> -		ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
> +		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
>  		max-link-speed = <3>;
>  		num-lanes = <2>;
>  		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
> @@ -646,7 +614,7 @@
>  		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
>  		interrupt-names = "link_state";
>  		interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
> -		ti,syscon-pcie-ctrl = <&pcie0_ctrl>;
> +		ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
>  		max-link-speed = <3>;
>  		num-lanes = <2>;
>  		power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
> @@ -668,7 +636,7 @@
>  		interrupt-names = "link_state";
>  		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
>  		device_type = "pci";
> -		ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
> +		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
>  		max-link-speed = <3>;
>  		num-lanes = <2>;
>  		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
> @@ -695,7 +663,7 @@
>  		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
>  		interrupt-names = "link_state";
>  		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
> -		ti,syscon-pcie-ctrl = <&pcie1_ctrl>;
> +		ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
>  		max-link-speed = <3>;
>  		num-lanes = <2>;
>  		power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
> @@ -717,7 +685,7 @@
>  		interrupt-names = "link_state";
>  		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
>  		device_type = "pci";
> -		ti,syscon-pcie-ctrl = <&pcie2_ctrl>;
> +		ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
>  		max-link-speed = <3>;
>  		num-lanes = <2>;
>  		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
> @@ -744,7 +712,7 @@
>  		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
>  		interrupt-names = "link_state";
>  		interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
> -		ti,syscon-pcie-ctrl = <&pcie2_ctrl>;
> +		ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
>  		max-link-speed = <3>;
>  		num-lanes = <2>;
>  		power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
> @@ -766,7 +734,7 @@
>  		interrupt-names = "link_state";
>  		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
>  		device_type = "pci";
> -		ti,syscon-pcie-ctrl = <&pcie3_ctrl>;
> +		ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
>  		max-link-speed = <3>;
>  		num-lanes = <2>;
>  		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
> @@ -793,7 +761,7 @@
>  		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
>  		interrupt-names = "link_state";
>  		interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
> -		ti,syscon-pcie-ctrl = <&pcie3_ctrl>;
> +		ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
>  		max-link-speed = <3>;
>  		num-lanes = <2>;
>  		power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
> -- 
> 2.17.1
>