[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1605686780-17886-9-git-send-email-wendy.liang@xilinx.com>
Date: Wed, 18 Nov 2020 00:06:19 -0800
From: Wendy Liang <wendy.liang@...inx.com>
To: <robh+dt@...nel.org>, <michal.simek@...inx.com>, <arnd@...db.de>,
<gregkh@...uxfoundation.org>, <sumit.semwal@...aro.org>,
<christian.koenig@....com>, <derek.kiernan@...inx.com>,
<dragan.cvetic@...inx.com>, <rajan.vaja@...inx.com>,
<tejas.patel@...inx.com>, <manish.narani@...inx.com>,
<ravi.patel@...inx.com>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-media@...r.kernel.org>,
<dri-devel@...ts.freedesktop.org>,
<linaro-mm-sig@...ts.linaro.org>,
"Izhar Ameer Shaikh" <izhar.ameer.shaikh@...inx.com>,
Wendy Liang <wendy.liang@...inx.com>
Subject: [PATCH 8/9] firmware: xilinx: Add IOCTL support for AIE ISR Clear
From: Izhar Ameer Shaikh <izhar.ameer.shaikh@...inx.com>
Latching of AIE NPI Interrupts is present in Versal ES1 Silicon Rev,
however it has been removed from ES2 rev.
As a result on ES1, in order to use the interrupt, a client needs to
request PMC to clear/ack the interrupt.
Provide an EEMI IOCTL to serve the same purpose. Note that, this will
only be applicable for ES1 rev. For ES2 and other non-silicon platforms,
this call will essentially be a NOP in the firmware.
Signed-off-by: Izhar Ameer Shaikh <izhar.ameer.shaikh@...inx.com>
Signed-off-by: Wendy Liang <wendy.liang@...inx.com>
---
drivers/firmware/xilinx/zynqmp.c | 14 ++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 8 ++++++++
2 files changed, 22 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index efb8a66..7a0c6a3 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -702,6 +702,20 @@ int zynqmp_pm_set_boot_health_status(u32 value)
}
/**
+ * zynqmp_pm_clear_aie_npi_isr - Clear AI engine NPI interrupt status register
+ * @node: AI engine node id
+ * @irq_mask: Mask of AI engine NPI interrupt bit to clear
+ *
+ * Return: Returns status, either success or error+reason
+ */
+int zynqmp_pm_clear_aie_npi_isr(u32 node, u32 irq_mask)
+{
+ return zynqmp_pm_invoke_fn(PM_IOCTL, node, IOCTL_AIE_ISR_CLEAR,
+ irq_mask, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_clear_aie_npi_isr);
+
+/**
* zynqmp_pm_reset_assert - Request setting of reset (1 - assert, 0 - release)
* @reset: Reset to be configured
* @assert_flag: Flag stating should reset be asserted (1) or
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 5968df8..b929d57 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -116,6 +116,8 @@ enum pm_ioctl_id {
IOCTL_READ_PGGS = 15,
/* Set healthy bit value */
IOCTL_SET_BOOT_HEALTH_STATUS = 17,
+ /* AI engine NPI ISR clear */
+ IOCTL_AIE_ISR_CLEAR = 24,
};
enum pm_query_id {
@@ -357,6 +359,7 @@ int zynqmp_pm_write_pggs(u32 index, u32 value);
int zynqmp_pm_read_pggs(u32 index, u32 *value);
int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype);
int zynqmp_pm_set_boot_health_status(u32 value);
+int zynqmp_pm_clear_aie_npi_isr(u32 node, u32 irq_mask);
#else
static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
{
@@ -507,6 +510,11 @@ static inline int zynqmp_pm_set_boot_health_status(u32 value)
{
return -ENODEV;
}
+
+static int zynqmp_pm_clear_aie_npi_isr(u32 node, u32 irq_mask)
+{
+ return -ENODEV;
+}
#endif
#endif /* __FIRMWARE_ZYNQMP_H__ */
--
2.7.4
Powered by blists - more mailing lists