| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 18 Nov 2020 10:28:07 +0200
From: Jyri Sarha <jsarha@...com>
To: Peter Ujfalusi <peter.ujfalusi@...com>, <ssantosh@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<nsekhar@...com>, <tomi.valkeinen@...com>
Subject: Re: [PATCH] ARM: dts: keystone-k2g-evm: add HDMI and analog audio
data
On 18/11/2020 09:39, Peter Ujfalusi wrote:
> Hi,
>
Hi,
I certainly agree with your point, but you missed one place that needs
changing. sii9022-node also refers to the renamed clock node, and that
should be changed too (see bellow).
> On 17/11/2020 12.17, Peter Ujfalusi wrote:
>> The board is using McASP2 for both analog (tlv320aic3106) and
>> HDMI (SiI9022) audio.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
>> ---
>> arch/arm/boot/dts/keystone-k2g-evm.dts | 112 +++++++++++++++++++++++++
>> 1 file changed, 112 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
>> index 8b3d64c913d8..4d7e3514a3a7 100644
>> --- a/arch/arm/boot/dts/keystone-k2g-evm.dts
>> +++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
>> @@ -46,6 +46,14 @@ vcc1v8_ldo1_reg: fixedregulator-vcc1v8-ldo1 {
>> regulator-always-on;
>> };
>>
>> + vcc1v8_ldo2_reg: fixedregulator-vcc1v8-ldo2 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "ldo2";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + };
>> +
>> hdmi: connector {
>> compatible = "hdmi-connector";
>> label = "hdmi";
>> @@ -58,6 +66,57 @@ hdmi_connector_in: endpoint {
>> };
>> };
>> };
>> +
>> + sound0: sound@0 {
>> + compatible = "simple-audio-card";
>> + simple-audio-card,name = "K2G-EVM";
>> + simple-audio-card,widgets =
>> + "Headphone", "Headphone Jack",
>> + "Line", "Line In";
>> + simple-audio-card,routing =
>> + "Headphone Jack", "HPLOUT",
>> + "Headphone Jack", "HPROUT",
>> + "LINE1L", "Line In",
>> + "LINE1R", "Line In";
>> +
>> + simple-audio-card,dai-link@0 {
>> + format = "i2s";
>> + bitclock-master = <&sound0_0_master>;
>> + frame-master = <&sound0_0_master>;
>> + sound0_0_master: cpu {
>> + sound-dai = <&mcasp2>;
>> + clocks = <&k2g_clks 0x6 1>;
>> + system-clock-direction-out;
>> + };
>> +
>> + codec {
>> + sound-dai = <&tlv320aic3106>;
>> + system-clock-frequency = <12288000>;
>
> I think it would be better to use:
> clocks = <&aud_mclk>;
>
>
>> + };
>> + };
>> +
>> + simple-audio-card,dai-link@1 {
>> + format = "i2s";
>> + bitclock-master = <&sound0_1_master>;
>> + frame-master = <&sound0_1_master>;
>> + sound0_1_master: cpu {
>> + sound-dai = <&mcasp2>;
>> + clocks = <&k2g_clks 0x6 1>;
>> + system-clock-direction-out;
>> + };
>> +
>> + codec {
>> + sound-dai = <&sii9022>;
>> + system-clock-frequency = <12288000>;
>
> and here as well:
> clocks = <&aud_mclk>;
>
>
>> + };
>> + };
>> + };
>> +
>> + sii9022_mclk: sii9022_mclk {
>
> and rename the fixed clock to aud_mclk as the same clock is connected to
> both aic3106 and SiI9022
>
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <12288000>;
>> + };
>> };
>>
>> &k2g_pinctrl {
>> @@ -214,6 +273,15 @@ K2G_CORE_IOPAD(0x10e4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssde.dssd
>> K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */
>> >;
>> };
>> +
>> + mcasp2_pins: pinmux_mcasp2_pins {
>> + pinctrl-single,pins = <
>> + K2G_CORE_IOPAD(0x1234) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo2.mcasp2_axr2 */
>> + K2G_CORE_IOPAD(0x1238) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo3.mcasp2_axr3 */
>> + K2G_CORE_IOPAD(0x1254) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo10.mcasp2_afsx */
>> + K2G_CORE_IOPAD(0x125c) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE4) /* pr0_pru_gpo12.mcasp2_aclkx */
>> + >;
>> + };
>> };
>>
>> &uart0 {
>> @@ -423,6 +491,10 @@ sii9022: sii9022@3b {
>> compatible = "sil,sii9022";
>> reg = <0x3b>;
>>
>> + sil,i2s-data-lanes = < 0 >;
>> + clocks = <&sii9022_mclk>;
... and here:
clocks = <&aud_mclk>;
>> + clock-names = "mclk";
>> +
>> ports {
>> #address-cells = <1>;
>> #size-cells = <0>;
>> @@ -444,6 +516,19 @@ sii9022_out: endpoint {
>> };
>> };
>> };
>> +
>> + tlv320aic3106: tlv320aic3106@1b {
>> + #sound-dai-cells = <0>;
>> + compatible = "ti,tlv320aic3106";
>> + reg = <0x1b>;
>> + status = "okay";
>> +
>> + /* Regulators */
>> + AVDD-supply = <&vcc3v3_dcin_reg>;
>> + IOVDD-supply = <&vcc3v3_dcin_reg>;
>> + DRVDD-supply = <&vcc3v3_dcin_reg>;
>> + DVDD-supply = <&vcc1v8_ldo2_reg>;
>> + };
>> };
>>
>> &dss {
>> @@ -458,3 +543,30 @@ dpi_out: endpoint {
>> };
>> };
>> };
>> +
>> +&k2g_clks {
>> + /* on the board 22.5792MHz is connected to AUDOSC_IN */
>> + assigned-clocks = <&k2g_clks 0x4c 2>;
>> + assigned-clock-rates = <22579200>;
>> +};
>> +
>> +&mcasp2 {
>> + #sound-dai-cells = <0>;
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&mcasp2_pins>;
>> +
>> + assigned-clocks = <&k2g_clks 0x6 1>;
>> + assigned-clock-parents = <&k2g_clks 0x6 2>;
>> +
>> + status = "okay";
>> +
>> + op-mode = <0>; /* MCASP_IIS_MODE */
>> + tdm-slots = <2>;
>> + /* 6 serializer */
>> + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
>> + 0 0 1 2 0 0 // AXR2: TX, AXR3: rx
>> + >;
>> + tx-num-evt = <32>;
>> + rx-num-evt = <32>;
>> +};
>>
>
> - Péter
>
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
Best regards,
Jyri
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Powered by blists - more mailing lists