linux-kernel - [PATCHv2 1/5] firmware: stratix10-svc: add COMMAND_AUTHENTICATE

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1605709753-7800-2-git-send-email-richard.gong@linux.intel.com>
Date:   Wed, 18 Nov 2020 08:29:09 -0600
From:   richard.gong@...ux.intel.com
To:     gregkh@...uxfoundation.org, mdf@...nel.org, trix@...hat.com,
        linux-fpga@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:     dinguyen@...nel.org, sridhar.rajagopal@...el.com,
        richard.gong@...ux.intel.com, richard.gong@...el.com
Subject: [PATCHv2 1/5] firmware: stratix10-svc: add COMMAND_AUTHENTICATE_BITSTREAM flag

From: Richard Gong <richard.gong@...el.com>

Add COMMAND_AUTHENTICATE_BITSTREAM command flag for new added bitstream
authentication feature. Authenticating a bistream is to make sure a signed
bitstream has the valid signatures.

Except for the actual configuration of the device, the bitstream
authentication works the same way as FPGA configuration does. If the
authentication passes, the signed bitstream will be programmed into QSPI
flash memory and will be expected to boot without issues.

Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which
aligns with the firmware settings.

Signed-off-by: Richard Gong <richard.gong@...el.com>
---
v2: new added
---
 include/linux/firmware/intel/stratix10-svc-client.h | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h
index a93d859..85463c8 100644
--- a/include/linux/firmware/intel/stratix10-svc-client.h
+++ b/include/linux/firmware/intel/stratix10-svc-client.h
@@ -51,12 +51,17 @@
 #define SVC_STATUS_NO_SUPPORT		6
 
 /**
- * Flag bit for COMMAND_RECONFIG
+ * Flag bit for COMMAND_RECONFIG, in bit number
  *
  * COMMAND_RECONFIG_FLAG_PARTIAL:
- * Set to FPGA configuration type (full or partial).
+ * Set for partial FPGA configuration.
+ *
+ * COMMAND_AUTHENTICATE_BITSTREAM:
+ * Set for bitstream authentication, which makes sure a signed bitstream
+ * has valid signatures before committing it to QSPI flash memory.
  */
-#define COMMAND_RECONFIG_FLAG_PARTIAL	1
+#define COMMAND_RECONFIG_FLAG_PARTIAL	0
+#define COMMAND_AUTHENTICATE_BITSTREAM	1
 
 /**
  * Timeout settings for service clients:
-- 
2.7.4