| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1605777745-23625-2-git-send-email-victor.liu@nxp.com>
Date: Thu, 19 Nov 2020 17:22:18 +0800
From: Liu Ying <victor.liu@....com>
To: linux-arm-kernel@...ts.infradead.org,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: p.zabel@...gutronix.de, airlied@...ux.ie, daniel@...ll.ch,
shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, linux-imx@....com, robh+dt@...nel.org,
maarten.lankhorst@...ux.intel.com, mripard@...nel.org,
tzimmermann@...e.de
Subject: [PATCH 1/8] dt-bindings: display: imx: Add i.MX8qxp/qm DPU binding
This patch adds bindings for i.MX8qxp/qm Display Processing Unit.
Signed-off-by: Liu Ying <victor.liu@....com>
---
.../bindings/display/imx/fsl,imx8qxp-dpu.yaml | 358 +++++++++++++++++++++
1 file changed, 358 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml
new file mode 100644
index 00000000..2c6b029
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml
@@ -0,0 +1,358 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dpu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qm/qxp Display Processing Unit
+
+maintainers:
+ - Liu Ying <victor.liu@....com>
+
+description: |
+ The Freescale i.MX8qm/qxp Display Processing Unit(DPU) is comprised of two
+ main components that include a blit engine for 2D graphics accelerations
+ and a display controller for display output processing, as well as a command
+ sequencer.
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,imx8qxp-dpu
+ - const: fsl,imx8qm-dpu
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: store9 shadow load interrupt (blit engine)
+ - description: store9 frame complete interrupt (blit engine)
+ - description: store9 sequence complete interrupt (blit engine)
+ - description: extdst0 shadow load interrupt (display controller, content stream 0)
+ - description: extdst0 frame complete interrupt (display controller, content stream 0)
+ - description: extdst0 sequence complete interrupt (display controller, content stream 0)
+ - description: extdst4 shadow load interrupt (display controller, safety stream 0)
+ - description: extdst4 frame complete interrupt (display controller, safety stream 0)
+ - description: extdst4 sequence complete interrupt (display controller, safety stream 0)
+ - description: extdst1 shadow load interrupt (display controller, content stream 1)
+ - description: extdst1 frame complete interrupt (display controller, content stream 1)
+ - description: extdst1 sequence complete interrupt (display controller, content stream 1)
+ - description: extdst5 shadow load interrupt (display controller, safety stream 1)
+ - description: extdst5 frame complete interrupt (display controller, safety stream 1)
+ - description: extdst5 sequence complete interrupt (display controller, safety stream 1)
+ - description: disengcfg0 shadow load interrupt (display controller, display stream 0)
+ - description: disengcfg0 frame complete interrupt (display controller, display stream 0)
+ - description: disengcfg0 sequence complete interrupt (display controller, display stream 0)
+ - description: framegen0 programmable interrupt0 (display controller, display stream 0)
+ - description: framegen0 programmable interrupt1 (display controller, display stream 0)
+ - description: framegen0 programmable interrupt2 (display controller, display stream 0)
+ - description: framegen0 programmable interrupt3 (display controller, display stream 0)
+ - description: signature0 shadow load interrupt (display controller, display stream 0)
+ - description: signature0 measurement valid interrupt (display controller, display stream 0)
+ - description: signature0 error condition interrupt (display controller, display stream 0)
+ - description: disengcfg1 shadow load interrupt (display controller, display stream 1)
+ - description: disengcfg1 frame complete interrupt (display controller, display stream 1)
+ - description: disengcfg1 sequence complete interrupt (display controller, display stream 1)
+ - description: framegen1 programmable interrupt0 (display controller, display stream 1)
+ - description: framegen1 programmable interrupt1 (display controller, display stream 1)
+ - description: framegen1 programmable interrupt2 (display controller, display stream 1)
+ - description: framegen1 programmable interrupt3 (display controller, display stream 1)
+ - description: signature1 shadow load interrupt (display controller, display stream 1)
+ - description: signature1 measurement valid interrupt (display controller, display stream 1)
+ - description: signature1 error condition interrupt (display controller, display stream 1)
+ - description: command sequencer error condition interrupt (command sequencer)
+ - description: common control software interrupt0 (common control)
+ - description: common control software interrupt1 (common control)
+ - description: common control software interrupt2 (common control)
+ - description: common control software interrupt3 (common control)
+ - description: framegen0 sychronization status activated interrupt (display controller, safety stream 0)
+ - description: framegen0 sychronization status deactivated interrupt (display controller, safety stream 0)
+ - description: framegen0 sychronization status activated interrupt (display controller, content stream 0)
+ - description: framegen0 sychronization status deactivated interrupt (display controller, content stream 0)
+ - description: framegen1 sychronization status activated interrupt (display controller, safety stream 1)
+ - description: framegen1 sychronization status deactivated interrupt (display controller, safety stream 1)
+ - description: framegen1 sychronization status activated interrupt (display controller, content stream 1)
+ - description: framegen1 sychronization status deactivated interrupt (display controller, content stream 1)
+
+ interrupt-names:
+ items:
+ - const: store9_shdload
+ - const: store9_framecomplete
+ - const: store9_seqcomplete
+ - const: extdst0_shdload
+ - const: extdst0_framecomplete
+ - const: extdst0_seqcomplete
+ - const: extdst4_shdload
+ - const: extdst4_framecomplete
+ - const: extdst4_seqcomplete
+ - const: extdst1_shdload
+ - const: extdst1_framecomplete
+ - const: extdst1_seqcomplete
+ - const: extdst5_shdload
+ - const: extdst5_framecomplete
+ - const: extdst5_seqcomplete
+ - const: disengcfg_shdload0
+ - const: disengcfg_framecomplete0
+ - const: disengcfg_seqcomplete0
+ - const: framegen0_int0
+ - const: framegen0_int1
+ - const: framegen0_int2
+ - const: framegen0_int3
+ - const: sig0_shdload
+ - const: sig0_valid
+ - const: sig0_error
+ - const: disengcfg_shdload1
+ - const: disengcfg_framecomplete1
+ - const: disengcfg_seqcomplete1
+ - const: framegen1_int0
+ - const: framegen1_int1
+ - const: framegen1_int2
+ - const: framegen1_int3
+ - const: sig1_shdload
+ - const: sig1_valid
+ - const: sig1_error
+ - const: cmdseq_error
+ - const: comctrl_sw0
+ - const: comctrl_sw1
+ - const: comctrl_sw2
+ - const: comctrl_sw3
+ - const: framegen0_primsync_on
+ - const: framegen0_primsync_off
+ - const: framegen0_secsync_on
+ - const: framegen0_secsync_off
+ - const: framegen1_primsync_on
+ - const: framegen1_primsync_off
+ - const: framegen1_secsync_on
+ - const: framegen1_secsync_off
+
+ clocks:
+ minItems: 6
+ maxItems: 7
+
+ clock-names:
+ minItems: 6
+ maxItems: 7
+
+ power-domains:
+ items:
+ - description: DC power-domain
+ - description: PLL0 power-domain
+ - description: PLL1 power-domain
+
+ power-domain-names:
+ items:
+ - const: dc
+ - const: pll0
+ - const: pll1
+
+ fsl,dpr-channels:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ List of phandle which points to DPR channels associated with
+ this DPU instance.
+
+ ports:
+ type: object
+ description: |
+ A node containing DPU output port nodes with endpoint definitions
+ as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+ Documentation/devicetree/bindings/graph.txt
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ port@0:
+ type: object
+ description: The DPU output port node from display stream0.
+
+ properties:
+ reg:
+ const: 0
+
+ required:
+ - reg
+
+ port@1:
+ type: object
+ description: The DPU output port node from display stream1.
+
+ properties:
+ reg:
+ const: 1
+
+ required:
+ - reg
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - port@0
+ - port@1
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - clock-names
+ - power-domains
+ - power-domain-names
+ - fsl,dpr-channels
+ - ports
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qm-dpu
+ then:
+ properties:
+ clocks:
+ minItems: 7
+
+ clock-names:
+ items:
+ - const: axi
+ - const: cfg
+ - const: pll0
+ - const: pll1
+ - const: bypass0
+ - const: disp0
+ - const: disp1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx8qxp-dpu
+ then:
+ properties:
+ clocks:
+ minItems: 6
+
+ clock-names:
+ items:
+ - const: axi
+ - const: cfg
+ - const: pll0
+ - const: pll1
+ - const: disp0
+ - const: disp1
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-clock.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ dpu@...80000 {
+ compatible = "fsl,imx8qxp-dpu";
+ reg = <0x56180000 0x40000>;
+ interrupt-parent = <&dc0_irqsteer>;
+ interrupts = <448>, <449>, <450>, <64>,
+ <65>, <66>, <67>, <68>,
+ <69>, <70>, <193>, <194>,
+ <195>, <196>, <197>, <72>,
+ <73>, <74>, <75>, <76>,
+ <77>, <78>, <79>, <80>,
+ <81>, <199>, <200>, <201>,
+ <202>, <203>, <204>, <205>,
+ <206>, <207>, <208>, <0>,
+ <1>, <2>, <3>, <4>,
+ <82>, <83>, <84>, <85>,
+ <209>, <210>, <211>, <212>;
+ interrupt-names = "store9_shdload",
+ "store9_framecomplete",
+ "store9_seqcomplete",
+ "extdst0_shdload",
+ "extdst0_framecomplete",
+ "extdst0_seqcomplete",
+ "extdst4_shdload",
+ "extdst4_framecomplete",
+ "extdst4_seqcomplete",
+ "extdst1_shdload",
+ "extdst1_framecomplete",
+ "extdst1_seqcomplete",
+ "extdst5_shdload",
+ "extdst5_framecomplete",
+ "extdst5_seqcomplete",
+ "disengcfg_shdload0",
+ "disengcfg_framecomplete0",
+ "disengcfg_seqcomplete0",
+ "framegen0_int0",
+ "framegen0_int1",
+ "framegen0_int2",
+ "framegen0_int3",
+ "sig0_shdload",
+ "sig0_valid",
+ "sig0_error",
+ "disengcfg_shdload1",
+ "disengcfg_framecomplete1",
+ "disengcfg_seqcomplete1",
+ "framegen1_int0",
+ "framegen1_int1",
+ "framegen1_int2",
+ "framegen1_int3",
+ "sig1_shdload",
+ "sig1_valid",
+ "sig1_error",
+ "cmdseq_error",
+ "comctrl_sw0",
+ "comctrl_sw1",
+ "comctrl_sw2",
+ "comctrl_sw3",
+ "framegen0_primsync_on",
+ "framegen0_primsync_off",
+ "framegen0_secsync_on",
+ "framegen0_secsync_off",
+ "framegen1_primsync_on",
+ "framegen1_primsync_off",
+ "framegen1_secsync_on",
+ "framegen1_secsync_off";
+ clocks = <&dc0_lpcg IMX_DC0_LPCG_DC_AXI_CLK>,
+ <&dc0_lpcg IMX_DC0_LPCG_DC_CFG_CLK>,
+ <&clk IMX_DC0_PLL0_CLK>,
+ <&clk IMX_DC0_PLL1_CLK>,
+ <&dc0_lpcg IMX_DC0_LPCG_DISP0_CLK>,
+ <&dc0_lpcg IMX_DC0_LPCG_DISP1_CLK>;
+ clock-names = "axi", "cfg", "pll0", "pll1", "disp0", "disp1";
+ power-domains = <&pd IMX_SC_R_DC_0>,
+ <&pd IMX_SC_R_DC_0_PLL_0>,
+ <&pd IMX_SC_R_DC_0_PLL_1>;
+ power-domain-names = "dc", "pll0", "pll1";
+ fsl,dpr-channels = <&dc0_dpr1_channel1>,
+ <&dc0_dpr1_channel2>,
+ <&dc0_dpr1_channel3>,
+ <&dc0_dpr2_channel1>,
+ <&dc0_dpr2_channel2>,
+ <&dc0_dpr2_channel3>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dpu_disp0_pixel_combiner_ch0: endpoint {
+ remote-endpoint = <&pixel_combiner_ch0_dpu_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dpu_disp1_pixel_combiner_ch1: endpoint {
+ remote-endpoint = <&pixel_combiner_ch1_dpu_disp1>;
+ };
+ };
+ };
+ };
--
2.7.4
Powered by blists - more mailing lists