linux-kernel - Re: [PATCH v2 0/2] hwmon: (max127) Add Maxim MAX127 hardware monitoring

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20201119012826.GP1804098@lunn.ch>
Date:   Thu, 19 Nov 2020 02:28:26 +0100
From:   Andrew Lunn <andrew@...n.ch>
To:     Tao Ren <rentao.bupt@...il.com>
Cc:     Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Jonathan Corbet <corbet@....net>,
        Alexei Starovoitov <ast@...nel.org>,
        Daniel Borkmann <daniel@...earbox.net>,
        "David S . Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Jesper Dangaard Brouer <hawk@...nel.org>,
        John Fastabend <john.fastabend@...il.com>,
        linux-hwmon@...r.kernel.org, linux-doc@...r.kernel.org,
        linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
        bpf@...r.kernel.org, openbmc@...ts.ozlabs.org, taoren@...com,
        mikechoi@...com
Subject: Re: [PATCH v2 0/2] hwmon: (max127) Add Maxim MAX127 hardware
 monitoring

On Wed, Nov 18, 2020 at 03:42:53PM -0800, Tao Ren wrote:
> On Thu, Nov 19, 2020 at 12:27:19AM +0100, Andrew Lunn wrote:
> > On Wed, Nov 18, 2020 at 03:09:27PM -0800, rentao.bupt@...il.com wrote:
> > > From: Tao Ren <rentao.bupt@...il.com>
> > > 
> > > The patch series adds hardware monitoring driver for the Maxim MAX127
> > > chip.
> > 
> > Hi Tao
> > 
> > Why are using sending a hwmon driver to the networking mailing list?
> > 
> >     Andrew
> 
> Hi Andrew,
> 
> I added netdev because the mailing list is included in "get_maintainer.pl
> Documentation/hwmon/index.rst" output. Is it the right command to find
> reviewers? Could you please suggest? Thank you.

Hi Tae

What you are doing is correct. I suspected it was a get_maintainers
problem. Now we know this, we can figure out why it is adding all
these extra addresses which make no sense. Maybe a bug in the
MAINTAINERS file?

       Andrew