lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <b98756e1e34b4dbde0b0374c50765a33@codeaurora.org>
Date:   Thu, 19 Nov 2020 18:22:55 +0530
From:   gubbaven@...eaurora.org
To:     Marcel Holtmann <marcel@...tmann.org>
Cc:     Johan Hedberg <johan.hedberg@...il.com>,
        Matthias Kaehlcke <mka@...omium.org>,
        open list <linux-kernel@...r.kernel.org>,
        linux-bluetooth <linux-bluetooth@...r.kernel.org>,
        Hemantg <hemantg@...eaurora.org>,
        MSM <linux-arm-msm@...r.kernel.org>,
        Balakrishna Godavarthi <bgodavar@...eaurora.org>,
        Rocky Liao <rjliao@...eaurora.org>, hbandi@...eaurora.org,
        abhishekpandit@...omium.org
Subject: Re: [PATCH v1] Bluetooth: Use NVM files based on SoC ID for WCN3991

Hi Marcel,
On 2020-09-16 19:57, Marcel Holtmann wrote:
> Hi Venkata,
> 
>> This change will allow to use different NVM file based
>> on WCN3991 BT SoC ID.Need to use different NVM file based on
>> fab location for WCN3991 BT SoC.
>> 
>> Signed-off-by: Venkata Lakshmi Narayana Gubba 
>> <gubbaven@...eaurora.org>
>> ---
>> drivers/bluetooth/btqca.c   | 41 
>> +++++++++++++++++++++++++----------------
>> drivers/bluetooth/btqca.h   | 13 ++++++++-----
>> drivers/bluetooth/hci_qca.c | 11 +++++------
>> 3 files changed, 38 insertions(+), 27 deletions(-)
>> 
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index ce9dcff..a7e72f1 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -14,12 +14,11 @@
>> 
>> #define VERSION "0.1"
>> 
>> -int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> +int qca_read_soc_version(struct hci_dev *hdev, struct 
>> qca_btsoc_version *ver,
>> 			 enum qca_btsoc_type soc_type)
>> {
>> 	struct sk_buff *skb;
>> 	struct edl_event_hdr *edl;
>> -	struct qca_btsoc_version *ver;
>> 	char cmd;
>> 	int err = 0;
>> 	u8 event_type = HCI_EV_VENDOR;
>> @@ -70,9 +69,9 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 
>> *soc_version,
>> 	}
>> 
>> 	if (soc_type >= QCA_WCN3991)
>> -		memmove(&edl->data, &edl->data[1], sizeof(*ver));
>> -
>> -	ver = (struct qca_btsoc_version *)(edl->data);
>> +		memcpy(ver, &edl->data[1], sizeof(*ver));
> 
> any reason to use &edl->data[1] and not just edl->data + 1?
[Venkata]:
I will use edl->data + 1 and will update in next patchset.
> 
>> +	else
>> +		memcpy(ver, &edl->data, sizeof(*ver));
>> 
>> 	bt_dev_info(hdev, "QCA Product ID   :0x%08x",
>> 		    le32_to_cpu(ver->product_id));
>> @@ -83,13 +82,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 
>> *soc_version,
>> 	bt_dev_info(hdev, "QCA Patch Version:0x%08x",
>> 		    le16_to_cpu(ver->patch_ver));
>> 
>> -	/* QCA chipset version can be decided by patch and SoC
>> -	 * version, combination with upper 2 bytes from SoC
>> -	 * and lower 2 bytes from patch will be used.
>> -	 */
>> -	*soc_version = (le32_to_cpu(ver->soc_id) << 16) |
>> -		       (le16_to_cpu(ver->rom_ver) & 0x0000ffff);
>> -	if (*soc_version == 0)
>> +	if (le32_to_cpu(ver->soc_id) == 0 || le16_to_cpu(ver->rom_ver) == 0)
>> 		err = -EILSEQ;
>> 
>> out:
>> @@ -446,15 +439,25 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, 
>> const bdaddr_t *bdaddr)
>> EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
>> 
>> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> -		   enum qca_btsoc_type soc_type, u32 soc_ver,
>> +		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>> 		   const char *firmware_name)
>> {
>> 	struct qca_fw_config config;
>> 	int err;
>> 	u8 rom_ver = 0;
>> +	u32 soc_ver;
>> 
>> 	bt_dev_dbg(hdev, "QCA setup on UART");
>> 
>> +	/* QCA chipset version can be decided by patch and SoC
>> +	 * version, combination with upper 2 bytes from SoC
>> +	 * and lower 2 bytes from patch will be used.
>> +	 */
>> +	soc_ver = (le32_to_cpu(ver.soc_id) << 16) |
>> +		       (le16_to_cpu(ver.rom_ver) & 0x0000ffff);
> 
> Please indent this properly.
> 
[Venkat]:
Sure.I will update in next patchset.
> I am also confused about the 0x0000ffff since it is just 16-bit value
> in the first place. Also where do you want to shift the 32-bit value
> to.
> 
> Frankly, I find all this version magic kinda questionable.
> 
>> +
>> +	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
>> +
>> 	config.user_baud_rate = baudrate;
>> 
>> 	/* Download rampatch file */
>> @@ -491,9 +494,15 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t 
>> baudrate,
>> 	if (firmware_name)
>> 		snprintf(config.fwname, sizeof(config.fwname),
>> 			 "qca/%s", firmware_name);
>> -	else if (qca_is_wcn399x(soc_type))
>> -		snprintf(config.fwname, sizeof(config.fwname),
>> -			 "qca/crnv%02x.bin", rom_ver);
>> +	else if (qca_is_wcn399x(soc_type)) {
>> +		if (ver.soc_id == QCA_WCN3991_SOC_ID) {
>> +			snprintf(config.fwname, sizeof(config.fwname),
>> +				 "qca/crnv%02xu.bin", rom_ver);
>> +		} else {
>> +			snprintf(config.fwname, sizeof(config.fwname),
>> +				 "qca/crnv%02x.bin", rom_ver);
>> +		}
>> +	}
>> 	else if (soc_type == QCA_QCA6390)
>> 		snprintf(config.fwname, sizeof(config.fwname),
>> 			 "qca/htnv%02x.bin", rom_ver);
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index d81b74c..d01a9f5 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -34,6 +34,8 @@
>> #define QCA_HCI_CC_OPCODE		0xFC00
>> #define QCA_HCI_CC_SUCCESS		0x00
>> 
>> +#define QCA_WCN3991_SOC_ID		(0x40014320)
>> +
>> enum qca_baudrate {
>> 	QCA_BAUDRATE_115200 	= 0,
>> 	QCA_BAUDRATE_57600,
>> @@ -136,9 +138,9 @@ enum qca_btsoc_type {
>> 
>> int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> -		   enum qca_btsoc_type soc_type, u32 soc_ver,
>> +		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>> 		   const char *firmware_name);
>> -int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> +int qca_read_soc_version(struct hci_dev *hdev, struct 
>> qca_btsoc_version *ver,
>> 			 enum qca_btsoc_type);
>> int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
>> @@ -155,13 +157,14 @@ static inline int qca_set_bdaddr_rome(struct 
>> hci_dev *hdev, const bdaddr_t *bdad
>> }
>> 
>> static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t 
>> baudrate,
>> -				 enum qca_btsoc_type soc_type, u32 soc_ver,
>> -				 const char *firmware_name)
>> +		enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>> +				const char *firmware_name)
> 
> Please use proper indentation.
> 
[Venkat]:
Sure.I will update in next patchset.
>> {
>> 	return -EOPNOTSUPP;
>> }
>> 
>> -static inline int qca_read_soc_version(struct hci_dev *hdev, u32 
>> *soc_version,
>> +static inline int qca_read_soc_version(struct hci_dev *hdev,
>> +				       struct qca_btsoc_version *ver,
>> 				       enum qca_btsoc_type)
>> {
>> 	return -EOPNOTSUPP;
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 244b8fe..4c32c60 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -1649,7 +1649,7 @@ static int qca_setup(struct hci_uart *hu)
>> 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
>> 	const char *firmware_name = qca_get_firmware_name(hu);
>> 	int ret;
>> -	int soc_ver = 0;
>> +	struct qca_btsoc_version ver;
>> 
>> 	ret = qca_check_speeds(hu);
>> 	if (ret)
>> @@ -1678,7 +1678,7 @@ static int qca_setup(struct hci_uart *hu)
>> 	if (qca_is_wcn399x(soc_type)) {
>> 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
>> 
>> -		ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
>> +		ret = qca_read_soc_version(hdev, &ver, soc_type);
>> 		if (ret)
>> 			return ret;
>> 	} else {
>> @@ -1697,15 +1697,14 @@ static int qca_setup(struct hci_uart *hu)
>> 
>> 	if (!qca_is_wcn399x(soc_type)) {
>> 		/* Get QCA version information */
>> -		ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
>> +		ret = qca_read_soc_version(hdev, &ver, soc_type);
>> 		if (ret)
>> 			return ret;
>> 	}
>> 
>> -	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
>> 	/* Setup patch / NVM configurations */
>> -	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
>> -			firmware_name);
>> +	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, ver,
>> +			     firmware_name);
>> 	if (!ret) {
>> 		set_bit(QCA_IBS_ENABLED, &qca->flags);
>> 		qca_debugfs_init(hdev);
> 
> Regards
> 
> Marcel

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ