| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 19 Nov 2020 15:55:59 +0000
From: Paul Cercueil <paul@...pouillou.net>
To: David Airlie <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>
Cc: Sam Ravnborg <sam@...nborg.org>, od@...c.me,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH 3/3] drm/ingenic: Add support for serial 8-bit delta-RGB panels
Add support for 24-bit panels that are connected through a 8-bit bus and
use delta-RGB, which means a RGB pixel ordering on odd lines, and a GBR
pixel ordering on even lines.
Signed-off-by: Paul Cercueil <paul@...pouillou.net>
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 7 ++++++-
drivers/gpu/drm/ingenic/ingenic-drm.h | 14 ++++++++++++++
2 files changed, 20 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 0b2311b32b81..fdce8a8f276a 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -589,7 +589,7 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode = &crtc_state->adjusted_mode;
struct drm_connector *conn = conn_state->connector;
struct drm_display_info *info = &conn->display_info;
- unsigned int cfg;
+ unsigned int cfg, rgbcfg = 0;
priv->panel_is_sharp = info->bus_flags & DRM_BUS_FLAG_SHARP_SIGNALS;
@@ -626,6 +626,9 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
case MEDIA_BUS_FMT_RGB888_1X24:
cfg |= JZ_LCD_CFG_MODE_GENERIC_24BIT;
break;
+ case MEDIA_BUS_FMT_RGB888_3X8_DELTA:
+ rgbcfg = JZ_LCD_RGBC_EVEN_GBR | JZ_LCD_RGBC_ODD_RGB;
+ fallthrough;
case MEDIA_BUS_FMT_RGB888_3X8:
cfg |= JZ_LCD_CFG_MODE_8BIT_SERIAL;
break;
@@ -636,6 +639,7 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
}
regmap_write(priv->map, JZ_REG_LCD_CFG, cfg);
+ regmap_write(priv->map, JZ_REG_LCD_RGBC, rgbcfg);
}
static int ingenic_drm_encoder_atomic_check(struct drm_encoder *encoder,
@@ -653,6 +657,7 @@ static int ingenic_drm_encoder_atomic_check(struct drm_encoder *encoder,
switch (*info->bus_formats) {
case MEDIA_BUS_FMT_RGB888_3X8:
+ case MEDIA_BUS_FMT_RGB888_3X8_DELTA:
/*
* The LCD controller expects timing values in dot-clock ticks,
* which is 3x the timing values in pixels when using a 3x8-bit
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
index 9b48ce02803d..1b4347f7f084 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm.h
+++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
@@ -31,6 +31,7 @@
#define JZ_REG_LCD_SA1 0x54
#define JZ_REG_LCD_FID1 0x58
#define JZ_REG_LCD_CMD1 0x5C
+#define JZ_REG_LCD_RGBC 0x90
#define JZ_REG_LCD_OSDC 0x100
#define JZ_REG_LCD_OSDCTRL 0x104
#define JZ_REG_LCD_OSDS 0x108
@@ -138,6 +139,19 @@
#define JZ_LCD_STATE_SOF_IRQ BIT(4)
#define JZ_LCD_STATE_DISABLED BIT(0)
+#define JZ_LCD_RGBC_ODD_RGB (0x0 << 4)
+#define JZ_LCD_RGBC_ODD_RBG (0x1 << 4)
+#define JZ_LCD_RGBC_ODD_GRB (0x2 << 4)
+#define JZ_LCD_RGBC_ODD_GBR (0x3 << 4)
+#define JZ_LCD_RGBC_ODD_BRG (0x4 << 4)
+#define JZ_LCD_RGBC_ODD_BGR (0x5 << 4)
+#define JZ_LCD_RGBC_EVEN_RGB (0x0 << 0)
+#define JZ_LCD_RGBC_EVEN_RBG (0x1 << 0)
+#define JZ_LCD_RGBC_EVEN_GRB (0x2 << 0)
+#define JZ_LCD_RGBC_EVEN_GBR (0x3 << 0)
+#define JZ_LCD_RGBC_EVEN_BRG (0x4 << 0)
+#define JZ_LCD_RGBC_EVEN_BGR (0x5 << 0)
+
#define JZ_LCD_OSDC_OSDEN BIT(0)
#define JZ_LCD_OSDC_F0EN BIT(3)
#define JZ_LCD_OSDC_F1EN BIT(4)
--
2.29.2
Powered by blists - more mailing lists