[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201120153855.3920757-1-narmstrong@baylibre.com>
Date: Fri, 20 Nov 2020 16:38:55 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: vkoul@...nel.org, kishon@...com
Cc: linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Neil Armstrong <narmstrong@...libre.com>,
Kevin Hilman <khilman@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH v3] phy: amlogic: phy-meson-gxl-usb2: keep ID pull-up even in Host mode
In order to keep OTG ID detection even when in Host mode, the ID line of
the PHY (if the current phy is an OTG one) pull-up should be kept
enable in both modes.
This fixes OTG switch on GXL, GXM & AXG platforms, otherwise once switched
to Host, the ID detection doesn't work anymore to switch back to Device.
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
Reviewed-by: Kevin Hilman <khilman@...libre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
drivers/phy/amlogic/phy-meson-gxl-usb2.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/amlogic/phy-meson-gxl-usb2.c b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
index 875afb2672c7..2b3c0d730f20 100644
--- a/drivers/phy/amlogic/phy-meson-gxl-usb2.c
+++ b/drivers/phy/amlogic/phy-meson-gxl-usb2.c
@@ -158,7 +158,8 @@ static int phy_meson_gxl_usb2_set_mode(struct phy *phy,
U2P_R0_DM_PULLDOWN);
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_DP_PULLDOWN,
U2P_R0_DP_PULLDOWN);
- regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP, 0);
+ regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_ID_PULLUP,
+ U2P_R0_ID_PULLUP);
break;
case PHY_MODE_USB_DEVICE:
--
2.25.1
Powered by blists - more mailing lists