Message-Id: <20201120104539.964287630@linuxfoundation.org>
Date:   Fri, 20 Nov 2020 12:03:06 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>, dja@...ens.net,
        Nicholas Piggin <npiggin@...il.com>
Subject: [PATCH 4.4 08/15] powerpc/64s: flush L1D after user accesses

From: Nicholas Piggin <npiggin@...il.com>

commit 9a32a7e78bd0cd9a9b6332cbdc345ee5ffd0c5de upstream.

IBM Power9 processors can speculatively operate on data in the L1 cache before
it has been completely validated, via a way-prediction mechanism. It is not possible
for an attacker to determine the contents of impermissible memory using this method,
since these systems implement a combination of hardware and software security measures
to prevent scenarios where protected data could be leaked.

However these measures don't address the scenario where an attacker induces
the operating system to speculatively execute instructions using data that the
attacker controls. This can be used for example to speculatively bypass "kernel
user access prevention" techniques, as discovered by Anthony Steinhauser of
Google's Safeside Project. This is not an attack by itself, but there is a possibility
it could be used in conjunction with side-channels or other weaknesses in the
privileged code to construct an attack.

This issue can be mitigated by flushing the L1 cache between privilege boundaries
of concern. This patch flushes the L1 cache after user accesses.

This is part of the fix for CVE-2020-4788.

Signed-off-by: Nicholas Piggin <npiggin@...il.com>
Signed-off-by: Daniel Axtens <dja@...ens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 Documentation/kernel-parameters.txt            |    4 +
 arch/powerpc/include/asm/book3s/64/kup-radix.h |   23 ++++++
 arch/powerpc/include/asm/feature-fixups.h      |    9 ++
 arch/powerpc/include/asm/kup.h                 |    4 +
 arch/powerpc/include/asm/security_features.h   |    3 
 arch/powerpc/include/asm/setup.h               |    1 
 arch/powerpc/kernel/exceptions-64s.S           |   86 +++++++------------------
 arch/powerpc/kernel/ppc_ksyms.c                |    7 ++
 arch/powerpc/kernel/setup_64.c                 |   80 +++++++++++++++++++++++
 arch/powerpc/kernel/vmlinux.lds.S              |    7 ++
 arch/powerpc/lib/feature-fixups.c              |   50 ++++++++++++++
 arch/powerpc/platforms/powernv/setup.c         |    7 +-
 arch/powerpc/platforms/pseries/setup.c         |    4 +
 13 files changed, 224 insertions(+), 61 deletions(-)
 create mode 100644 arch/powerpc/include/asm/book3s/64/kup-radix.h

--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2197,6 +2197,7 @@ bytes respectively. Such letter suffixes
 					       mds=off [X86]
 					       tsx_async_abort=off [X86]
 					       no_entry_flush [PPC]
+					       no_uaccess_flush [PPC]
 
 			auto (default)
 				Mitigate all CPU vulnerabilities, but leave SMT
@@ -2521,6 +2522,9 @@ bytes respectively. Such letter suffixes
 	nospec_store_bypass_disable
 			[HW] Disable all mitigations for the Speculative Store Bypass vulnerability
 
+	no_uaccess_flush
+			[PPC] Don't flush the L1-D cache after accessing user data.
+
 	noxsave		[BUGS=X86] Disables x86 extended register state save
 			and restore using xsave. The kernel will fallback to
 			enabling legacy floating-point and sse state.
--- /dev/null
+++ b/arch/powerpc/include/asm/book3s/64/kup-radix.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H
+#define _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H
+#include <linux/jump_label.h>
+
+DECLARE_STATIC_KEY_FALSE(uaccess_flush_key);
+
+/* Prototype for function defined in exceptions-64s.S */
+void do_uaccess_flush(void);
+
+static __always_inline void allow_user_access(void __user *to, const void __user *from,
+					      unsigned long size)
+{
+}
+
+static inline void prevent_user_access(void __user *to, const void __user *from,
+				       unsigned long size)
+{
+	if (static_branch_unlikely(&uaccess_flush_key))
+		do_uaccess_flush();
+}
+
+#endif /* _ASM_POWERPC_BOOK3S_64_KUP_RADIX_H */
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -200,6 +200,14 @@ label##3:					       	\
 	FTR_ENTRY_OFFSET 955b-956b;			\
 	.popsection;
 
+#define UACCESS_FLUSH_FIXUP_SECTION			\
+959:							\
+	.pushsection __uaccess_flush_fixup,"a";		\
+	.align 2;					\
+960:							\
+	FTR_ENTRY_OFFSET 959b-960b;			\
+	.popsection;
+
 #define ENTRY_FLUSH_FIXUP_SECTION			\
 957:							\
 	.pushsection __entry_flush_fixup,"a";		\
@@ -242,6 +250,7 @@ extern long stf_barrier_fallback;
 extern long entry_flush_fallback;
 extern long __start___stf_entry_barrier_fixup, __stop___stf_entry_barrier_fixup;
 extern long __start___stf_exit_barrier_fixup, __stop___stf_exit_barrier_fixup;
+extern long __start___uaccess_flush_fixup, __stop___uaccess_flush_fixup;
 extern long __start___entry_flush_fixup, __stop___entry_flush_fixup;
 extern long __start___rfi_flush_fixup, __stop___rfi_flush_fixup;
 extern long __start___barrier_nospec_fixup, __stop___barrier_nospec_fixup;
--- a/arch/powerpc/include/asm/kup.h
+++ b/arch/powerpc/include/asm/kup.h
@@ -6,10 +6,14 @@
 
 #include <asm/pgtable.h>
 
+#ifdef CONFIG_PPC_BOOK3S_64
+#include <asm/book3s/64/kup-radix.h>
+#else
 static inline void allow_user_access(void __user *to, const void __user *from,
 				     unsigned long size) { }
 static inline void prevent_user_access(void __user *to, const void __user *from,
 				       unsigned long size) { }
+#endif /* CONFIG_PPC_BOOK3S_64 */
 
 static inline void allow_read_from_user(const void __user *from, unsigned long size)
 {
--- a/arch/powerpc/include/asm/security_features.h
+++ b/arch/powerpc/include/asm/security_features.h
@@ -87,6 +87,8 @@ static inline bool security_ftr_enabled(
 // The L1-D cache should be flushed when entering the kernel
 #define SEC_FTR_L1D_FLUSH_ENTRY		0x0000000000004000ull
 
+// The L1-D cache should be flushed after user accesses from the kernel
+#define SEC_FTR_L1D_FLUSH_UACCESS	0x0000000000008000ull
 
 // Features enabled by default
 #define SEC_FTR_DEFAULT \
@@ -94,6 +96,7 @@ static inline bool security_ftr_enabled(
 	 SEC_FTR_L1D_FLUSH_PR | \
 	 SEC_FTR_BNDS_CHK_SPEC_BAR | \
 	 SEC_FTR_L1D_FLUSH_ENTRY | \
+	 SEC_FTR_L1D_FLUSH_UACCESS | \
 	 SEC_FTR_FAVOUR_SECURITY)
 
 #endif /* _ASM_POWERPC_SECURITY_FEATURES_H */
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -46,6 +46,7 @@ void setup_barrier_nospec(void);
 #else
 static inline void setup_barrier_nospec(void) { };
 #endif
+void do_uaccess_flush_fixups(enum l1d_flush_type types);
 void do_entry_flush_fixups(enum l1d_flush_type types);
 void do_barrier_nospec_fixups(bool enable);
 extern bool barrier_nospec_enabled;
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1630,14 +1630,9 @@ stf_barrier_fallback:
 	.endr
 	blr
 
-	.globl rfi_flush_fallback
-rfi_flush_fallback:
-	SET_SCRATCH0(r13);
-	GET_PACA(r13);
-	std	r9,PACA_EXRFI+EX_R9(r13)
-	std	r10,PACA_EXRFI+EX_R10(r13)
-	std	r11,PACA_EXRFI+EX_R11(r13)
-	mfctr	r9
+
+/* Clobbers r10, r11, ctr */
+.macro L1D_DISPLACEMENT_FLUSH
 	ld	r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
 	ld	r11,PACA_L1D_FLUSH_SIZE(r13)
 	srdi	r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
@@ -1663,7 +1658,18 @@ rfi_flush_fallback:
 	ld	r11,(0x80 + 8)*7(r10)
 	addi	r10,r10,0x80*8
 	bdnz	1b
+.endm
+
 
+	.globl rfi_flush_fallback
+rfi_flush_fallback:
+	SET_SCRATCH0(r13);
+	GET_PACA(r13);
+	std	r9,PACA_EXRFI+EX_R9(r13)
+	std	r10,PACA_EXRFI+EX_R10(r13)
+	std	r11,PACA_EXRFI+EX_R11(r13)
+	mfctr	r9
+	L1D_DISPLACEMENT_FLUSH
 	mtctr	r9
 	ld	r9,PACA_EXRFI+EX_R9(r13)
 	ld	r10,PACA_EXRFI+EX_R10(r13)
@@ -1679,32 +1685,7 @@ hrfi_flush_fallback:
 	std	r10,PACA_EXRFI+EX_R10(r13)
 	std	r11,PACA_EXRFI+EX_R11(r13)
 	mfctr	r9
-	ld	r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
-	ld	r11,PACA_L1D_FLUSH_SIZE(r13)
-	srdi	r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
-	mtctr	r11
-	DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
-
-	/* order ld/st prior to dcbt stop all streams with flushing */
-	sync
-
-	/*
-	 * The load adresses are at staggered offsets within cachelines,
-	 * which suits some pipelines better (on others it should not
-	 * hurt).
-	 */
-1:
-	ld	r11,(0x80 + 8)*0(r10)
-	ld	r11,(0x80 + 8)*1(r10)
-	ld	r11,(0x80 + 8)*2(r10)
-	ld	r11,(0x80 + 8)*3(r10)
-	ld	r11,(0x80 + 8)*4(r10)
-	ld	r11,(0x80 + 8)*5(r10)
-	ld	r11,(0x80 + 8)*6(r10)
-	ld	r11,(0x80 + 8)*7(r10)
-	addi	r10,r10,0x80*8
-	bdnz	1b
-
+	L1D_DISPLACEMENT_FLUSH
 	mtctr	r9
 	ld	r9,PACA_EXRFI+EX_R9(r13)
 	ld	r10,PACA_EXRFI+EX_R10(r13)
@@ -1718,38 +1699,14 @@ entry_flush_fallback:
 	std	r10,PACA_EXRFI+EX_R10(r13)
 	std	r11,PACA_EXRFI+EX_R11(r13)
 	mfctr	r9
-	ld	r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
-	ld	r11,PACA_L1D_FLUSH_SIZE(r13)
-	srdi	r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
-	mtctr	r11
-	DCBT_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
-
-	/* order ld/st prior to dcbt stop all streams with flushing */
-	sync
-
-	/*
-	 * The load addresses are at staggered offsets within cachelines,
-	 * which suits some pipelines better (on others it should not
-	 * hurt).
-	 */
-1:
-	ld	r11,(0x80 + 8)*0(r10)
-	ld	r11,(0x80 + 8)*1(r10)
-	ld	r11,(0x80 + 8)*2(r10)
-	ld	r11,(0x80 + 8)*3(r10)
-	ld	r11,(0x80 + 8)*4(r10)
-	ld	r11,(0x80 + 8)*5(r10)
-	ld	r11,(0x80 + 8)*6(r10)
-	ld	r11,(0x80 + 8)*7(r10)
-	addi	r10,r10,0x80*8
-	bdnz	1b
-
+	L1D_DISPLACEMENT_FLUSH
 	mtctr	r9
 	ld	r9,PACA_EXRFI+EX_R9(r13)
 	ld	r10,PACA_EXRFI+EX_R10(r13)
 	ld	r11,PACA_EXRFI+EX_R11(r13)
 	blr
 
+
 /*
  * Hash table stuff
  */
@@ -1909,3 +1866,12 @@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
 1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	kernel_bad_stack
 	b	1b
+
+_KPROBE(do_uaccess_flush)
+	UACCESS_FLUSH_FIXUP_SECTION
+	nop
+	nop
+	nop
+	blr
+	L1D_DISPLACEMENT_FLUSH
+	blr
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -6,6 +6,9 @@
 #include <asm/cacheflush.h>
 #include <asm/epapr_hcalls.h>
 #include <asm/uaccess.h>
+#ifdef CONFIG_PPC64
+#include <asm/book3s/64/kup-radix.h>
+#endif
 
 EXPORT_SYMBOL(flush_dcache_range);
 EXPORT_SYMBOL(flush_icache_range);
@@ -46,3 +49,7 @@ EXPORT_SYMBOL(epapr_hypercall_start);
 EXPORT_SYMBOL(current_stack_pointer);
 
 EXPORT_SYMBOL(__arch_clear_user);
+
+#ifdef CONFIG_PPC64
+EXPORT_SYMBOL(do_uaccess_flush);
+#endif
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -845,8 +845,12 @@ static enum l1d_flush_type enabled_flush
 static void *l1d_flush_fallback_area;
 static bool no_rfi_flush;
 static bool no_entry_flush;
+static bool no_uaccess_flush;
 bool rfi_flush;
 bool entry_flush;
+bool uaccess_flush;
+DEFINE_STATIC_KEY_FALSE(uaccess_flush_key);
+EXPORT_SYMBOL(uaccess_flush_key);
 
 static int __init handle_no_rfi_flush(char *p)
 {
@@ -864,6 +868,14 @@ static int __init handle_no_entry_flush(
 }
 early_param("no_entry_flush", handle_no_entry_flush);
 
+static int __init handle_no_uaccess_flush(char *p)
+{
+	pr_info("uaccess-flush: disabled on command line.");
+	no_uaccess_flush = true;
+	return 0;
+}
+early_param("no_uaccess_flush", handle_no_uaccess_flush);
+
 /*
  * The RFI flush is not KPTI, but because users will see doco that says to use
  * nopti we hijack that option here to also disable the RFI flush.
@@ -907,6 +919,23 @@ void entry_flush_enable(bool enable)
 	entry_flush = enable;
 }
 
+void uaccess_flush_enable(bool enable)
+{
+	if (enable) {
+		do_uaccess_flush_fixups(enabled_flush_types);
+		if (static_key_initialized)
+			static_branch_enable(&uaccess_flush_key);
+		else
+			printk(KERN_DEBUG "uaccess-flush: deferring static key until after static key initialization\n");
+		on_each_cpu(do_nothing, NULL, 1);
+	} else {
+		static_branch_disable(&uaccess_flush_key);
+		do_uaccess_flush_fixups(L1D_FLUSH_NONE);
+	}
+
+	uaccess_flush = enable;
+}
+
 static void __ref init_fallback_flush(void)
 {
 	u64 l1d_size, limit;
@@ -961,6 +990,15 @@ void setup_entry_flush(bool enable)
 		entry_flush_enable(enable);
 }
 
+void setup_uaccess_flush(bool enable)
+{
+	if (cpu_mitigations_off())
+		return;
+
+	if (!no_uaccess_flush)
+		uaccess_flush_enable(enable);
+}
+
 #ifdef CONFIG_DEBUG_FS
 static int rfi_flush_set(void *data, u64 val)
 {
@@ -1014,12 +1052,54 @@ static int entry_flush_get(void *data, u
 
 DEFINE_SIMPLE_ATTRIBUTE(fops_entry_flush, entry_flush_get, entry_flush_set, "%llu\n");
 
+static int uaccess_flush_set(void *data, u64 val)
+{
+	bool enable;
+
+	if (val == 1)
+		enable = true;
+	else if (val == 0)
+		enable = false;
+	else
+		return -EINVAL;
+
+	/* Only do anything if we're changing state */
+	if (enable != uaccess_flush)
+		uaccess_flush_enable(enable);
+
+	return 0;
+}
+
+static int uaccess_flush_get(void *data, u64 *val)
+{
+	*val = uaccess_flush ? 1 : 0;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_uaccess_flush, uaccess_flush_get, uaccess_flush_set, "%llu\n");
+
+
 static __init int rfi_flush_debugfs_init(void)
 {
 	debugfs_create_file("rfi_flush", 0600, powerpc_debugfs_root, NULL, &fops_rfi_flush);
 	debugfs_create_file("entry_flush", 0600, powerpc_debugfs_root, NULL, &fops_entry_flush);
+	debugfs_create_file("uaccess_flush", 0600, powerpc_debugfs_root, NULL, &fops_uaccess_flush);
 	return 0;
 }
 device_initcall(rfi_flush_debugfs_init);
 #endif
+
+/*
+ * setup_uaccess_flush runs before jump_label_init, so we can't do the setup
+ * there. Do it now instead.
+ */
+static __init int uaccess_flush_static_key_init(void)
+{
+	if (uaccess_flush) {
+		printk(KERN_DEBUG "uaccess-flush: switching on static key\n");
+		static_branch_enable(&uaccess_flush_key);
+	}
+	return 0;
+}
+early_initcall(uaccess_flush_static_key_init);
 #endif /* CONFIG_PPC_BOOK3S_64 */
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -81,6 +81,13 @@ SECTIONS
 	}
 
 	. = ALIGN(8);
+	__uaccess_flush_fixup : AT(ADDR(__uaccess_flush_fixup) - LOAD_OFFSET) {
+		__start___uaccess_flush_fixup = .;
+		*(__uaccess_flush_fixup)
+		__stop___uaccess_flush_fixup = .;
+	}
+
+	. = ALIGN(8);
 	__entry_flush_fixup : AT(ADDR(__entry_flush_fixup) - LOAD_OFFSET) {
 		__start___entry_flush_fixup = .;
 		*(__entry_flush_fixup)
--- a/arch/powerpc/lib/feature-fixups.c
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -229,6 +229,56 @@ void do_stf_barrier_fixups(enum stf_barr
 	do_stf_exit_barrier_fixups(types);
 }
 
+void do_uaccess_flush_fixups(enum l1d_flush_type types)
+{
+	unsigned int instrs[4], *dest;
+	long *start, *end;
+	int i;
+
+	start = PTRRELOC(&__start___uaccess_flush_fixup);
+	end = PTRRELOC(&__stop___uaccess_flush_fixup);
+
+	instrs[0] = 0x60000000; /* nop */
+	instrs[1] = 0x60000000; /* nop */
+	instrs[2] = 0x60000000; /* nop */
+	instrs[3] = 0x4e800020; /* blr */
+
+	i = 0;
+	if (types == L1D_FLUSH_FALLBACK) {
+		instrs[3] = 0x60000000; /* nop */
+		/* fallthrough to fallback flush */
+	}
+
+	if (types & L1D_FLUSH_ORI) {
+		instrs[i++] = 0x63ff0000; /* ori 31,31,0 speculation barrier */
+		instrs[i++] = 0x63de0000; /* ori 30,30,0 L1d flush*/
+	}
+
+	if (types & L1D_FLUSH_MTTRIG)
+		instrs[i++] = 0x7c12dba6; /* mtspr TRIG2,r0 (SPR #882) */
+
+	for (i = 0; start < end; start++, i++) {
+		dest = (void *)start + *start;
+
+		pr_devel("patching dest %lx\n", (unsigned long)dest);
+
+		patch_instruction(dest, instrs[0]);
+
+		patch_instruction((dest + 1), instrs[1]);
+		patch_instruction((dest + 2), instrs[2]);
+		patch_instruction((dest + 3), instrs[3]);
+	}
+
+	printk(KERN_DEBUG "uaccess-flush: patched %d locations (%s flush)\n", i,
+		(types == L1D_FLUSH_NONE)       ? "no" :
+		(types == L1D_FLUSH_FALLBACK)   ? "fallback displacement" :
+		(types &  L1D_FLUSH_ORI)        ? (types & L1D_FLUSH_MTTRIG)
+							? "ori+mttrig type"
+							: "ori type" :
+		(types &  L1D_FLUSH_MTTRIG)     ? "mttrig type"
+						: "unknown");
+}
+
 void do_entry_flush_fixups(enum l1d_flush_type types)
 {
 	unsigned int instrs[3], *dest;
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -126,9 +126,10 @@ static void pnv_setup_rfi_flush(void)
 
 	/*
 	 * 4.4 doesn't support Power9 bare metal, so we don't need to flush
-	 * here - the flush fixes a P9 specific vulnerability.
+	 * here - the flushes fix a P9 specific vulnerability.
 	 */
 	security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY);
+	security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS);
 
 	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \
 		 (security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR)   || \
@@ -140,6 +141,10 @@ static void pnv_setup_rfi_flush(void)
 	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
 		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
 	setup_entry_flush(enable);
+
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+	setup_uaccess_flush(enable);
 }
 
 static void __init pnv_setup_arch(void)
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -588,6 +588,10 @@ void pseries_setup_rfi_flush(void)
 	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
 		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY);
 	setup_entry_flush(enable);
+
+	enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
+		 security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS);
+	setup_uaccess_flush(enable);
 }
 
 static void __init pSeries_setup_arch(void)

Powered by blists - more mailing lists