lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201121063302.84090-1-john.stultz@linaro.org>
Date:   Sat, 21 Nov 2020 06:33:02 +0000
From:   John Stultz <john.stultz@...aro.org>
To:     lkml <linux-kernel@...r.kernel.org>
Cc:     John Stultz <john.stultz@...aro.org>, Todd Kjos <tkjos@...gle.com>,
        Saravana Kannan <saravanak@...gle.com>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rajendra Nayak <rnayak@...eaurora.org>,
        Maulik Shah <mkshah@...eaurora.org>,
        Stephen Boyd <swboyd@...omium.org>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>, linux-arm-msm@...r.kernel.org
Subject: [PATCH] regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error

The kernel test robot reported the following build error:

All errors (new ones prefixed by >>):

   xtensa-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_vrm_get_voltage_sel':
   qcom-rpmh-regulator.c:(.text+0x270): undefined reference to `rpmh_write'
   xtensa-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_send_request':
   qcom-rpmh-regulator.c:(.text+0x2f2): undefined reference to `rpmh_write'
   xtensa-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_vrm_get_voltage_sel':
>> qcom-rpmh-regulator.c:(.text+0x274): undefined reference to `rpmh_write_async'
   xtensa-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_send_request':
   qcom-rpmh-regulator.c:(.text+0x2fc): undefined reference to `rpmh_write_async'

Which is due to REGULATOR_QCOM_RPMH depending on
QCOM_RPMH || COMPILE_TEST. The problem is that QOM_RPMH can now
be a module, which in that case requires REGULATOR_QCOM_RPMH=m
to build.

However, if COMPILE_TEST is enabled, REGULATOR_QCOM_RPMH can be
set to =y while REGULATOR_QCOM_RPMH=m which will cause build
failures.

The easy fix here is to remove COMPILE_TEST.

Feedback would be appreciated!

Cc: Todd Kjos <tkjos@...gle.com>
Cc: Saravana Kannan <saravanak@...gle.com>
Cc: Andy Gross <agross@...nel.org>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
Cc: Rajendra Nayak <rnayak@...eaurora.org>
Cc: Maulik Shah <mkshah@...eaurora.org>
Cc: Stephen Boyd <swboyd@...omium.org>
Cc: Liam Girdwood <lgirdwood@...il.com>
Cc: Mark Brown <broonie@...nel.org>
Cc: linux-arm-msm@...r.kernel.org
Reported-by: kernel test robot <lkp@...el.com>
Signed-off-by: John Stultz <john.stultz@...aro.org>
---
 drivers/regulator/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 020a00d6696b..9e4fc73ed5a1 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -843,7 +843,7 @@ config REGULATOR_QCOM_RPM
 
 config REGULATOR_QCOM_RPMH
 	tristate "Qualcomm Technologies, Inc. RPMh regulator driver"
-	depends on QCOM_RPMH || COMPILE_TEST
+	depends on QCOM_RPMH
 	help
 	  This driver supports control of PMIC regulators via the RPMh hardware
 	  block found on Qualcomm Technologies Inc. SoCs.  RPMh regulator
-- 
2.17.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ