lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201123121813.358386193@linuxfoundation.org>
Date:   Mon, 23 Nov 2020 13:22:43 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Felix Fietkau <nbd@....name>,
        Johannes Berg <johannes.berg@...el.com>
Subject: [PATCH 4.19 83/91] mac80211: minstrel: remove deferred sampling code

From: Felix Fietkau <nbd@....name>

commit 4fe40b8e1566dad04c87fbf299049a1d0d4bd58d upstream.

Deferring sampling attempts to the second stage has some bad interactions
with drivers that process the rate table in hardware and use the probe flag
to indicate probing packets (e.g. most mt76 drivers). On affected drivers
it can lead to probing not working at all.

If the link conditions turn worse, it might not be such a good idea to
do a lot of sampling for lower rates in this case.

Fix this by simply skipping the sample attempt instead of deferring it,
but keep the checks that would allow it to be sampled if it was skipped
too often, but only if it has less than 95% success probability.

Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing
packets.

Cc: stable@...r.kernel.org
Fixes: cccf129f820e ("mac80211: add the 'minstrel' rate control algorithm")
Signed-off-by: Felix Fietkau <nbd@....name>
Link: https://lore.kernel.org/r/20201111183359.43528-2-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@...el.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 net/mac80211/rc80211_minstrel.c |   25 ++++---------------------
 net/mac80211/rc80211_minstrel.h |    1 -
 2 files changed, 4 insertions(+), 22 deletions(-)

--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -289,12 +289,6 @@ minstrel_tx_status(void *priv, struct ie
 			mi->r[ndx].stats.success += success;
 	}
 
-	if ((info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) && (i >= 0))
-		mi->sample_packets++;
-
-	if (mi->sample_deferred > 0)
-		mi->sample_deferred--;
-
 	if (time_after(jiffies, mi->last_stats_update +
 				(mp->update_interval * HZ) / 1000))
 		minstrel_update_stats(mp, mi);
@@ -373,7 +367,7 @@ minstrel_get_rate(void *priv, struct iee
 		return;
 
 	delta = (mi->total_packets * sampling_ratio / 100) -
-			(mi->sample_packets + mi->sample_deferred / 2);
+			mi->sample_packets;
 
 	/* delta < 0: no sampling required */
 	prev_sample = mi->prev_sample;
@@ -382,7 +376,6 @@ minstrel_get_rate(void *priv, struct iee
 		return;
 
 	if (mi->total_packets >= 10000) {
-		mi->sample_deferred = 0;
 		mi->sample_packets = 0;
 		mi->total_packets = 0;
 	} else if (delta > mi->n_rates * 2) {
@@ -407,19 +400,8 @@ minstrel_get_rate(void *priv, struct iee
 	 * rate sampling method should be used.
 	 * Respect such rates that are not sampled for 20 interations.
 	 */
-	if (mrr_capable &&
-	    msr->perfect_tx_time > mr->perfect_tx_time &&
-	    msr->stats.sample_skipped < 20) {
-		/* Only use IEEE80211_TX_CTL_RATE_CTRL_PROBE to mark
-		 * packets that have the sampling rate deferred to the
-		 * second MRR stage. Increase the sample counter only
-		 * if the deferred sample rate was actually used.
-		 * Use the sample_deferred counter to make sure that
-		 * the sampling is not done in large bursts */
-		info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
-		rate++;
-		mi->sample_deferred++;
-	} else {
+	if (msr->perfect_tx_time < mr->perfect_tx_time ||
+	    msr->stats.sample_skipped >= 20) {
 		if (!msr->sample_limit)
 			return;
 
@@ -439,6 +421,7 @@ minstrel_get_rate(void *priv, struct iee
 
 	rate->idx = mi->r[ndx].rix;
 	rate->count = minstrel_get_retry_count(&mi->r[ndx], info);
+	info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
 }
 
 
--- a/net/mac80211/rc80211_minstrel.h
+++ b/net/mac80211/rc80211_minstrel.h
@@ -98,7 +98,6 @@ struct minstrel_sta_info {
 	u8 max_prob_rate;
 	unsigned int total_packets;
 	unsigned int sample_packets;
-	int sample_deferred;
 
 	unsigned int sample_row;
 	unsigned int sample_column;


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ