| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201123153817.1616814-12-ciorneiioana@gmail.com>
Date: Mon, 23 Nov 2020 17:38:13 +0200
From: Ioana Ciornei <ciorneiioana@...il.com>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
Florian Fainelli <f.fainelli@...il.com>,
Jakub Kicinski <kuba@...nel.org>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Ioana Ciornei <ioana.ciornei@....com>, Dan Murphy <dmurphy@...com>
Subject: [PATCH net-next 11/15] net: phy: ti: implement generic .handle_interrupt() callback
From: Ioana Ciornei <ioana.ciornei@....com>
In an attempt to actually support shared IRQs in phylib, we now move the
responsibility of triggering the phylib state machine or just returning
IRQ_NONE, based on the IRQ status register, to the PHY driver. Having
3 different IRQ handling callbacks (.handle_interrupt(),
.did_interrupt() and .ack_interrupt() ) is confusing so let the PHY
driver implement directly an IRQ handler like any other device driver.
Make this driver follow the new convention.
Cc: Dan Murphy <dmurphy@...com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@....com>
---
drivers/net/phy/dp83640.c | 27 +++++++++++++++++++++++
drivers/net/phy/dp83822.c | 37 +++++++++++++++++++++++++++++++
drivers/net/phy/dp83848.c | 33 ++++++++++++++++++++++++++++
drivers/net/phy/dp83867.c | 25 +++++++++++++++++++++
drivers/net/phy/dp83869.c | 25 +++++++++++++++++++++
drivers/net/phy/dp83tc811.c | 44 +++++++++++++++++++++++++++++++++++++
6 files changed, 191 insertions(+)
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index f2caccaf4408..89577f1d3576 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -50,6 +50,14 @@
#define MII_DP83640_MISR_LINK_INT_EN 0x20
#define MII_DP83640_MISR_ED_INT_EN 0x40
#define MII_DP83640_MISR_LQ_INT_EN 0x80
+#define MII_DP83640_MISR_ANC_INT 0x400
+#define MII_DP83640_MISR_DUP_INT 0x800
+#define MII_DP83640_MISR_SPD_INT 0x1000
+#define MII_DP83640_MISR_LINK_INT 0x2000
+#define MII_DP83640_MISR_INT_MASK (MII_DP83640_MISR_ANC_INT |\
+ MII_DP83640_MISR_DUP_INT |\
+ MII_DP83640_MISR_SPD_INT |\
+ MII_DP83640_MISR_LINK_INT)
/* phyter seems to miss the mark by 16 ns */
#define ADJTIME_FIX 16
@@ -1193,6 +1201,24 @@ static int dp83640_config_intr(struct phy_device *phydev)
}
}
+static irqreturn_t dp83640_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, MII_DP83640_MISR);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & MII_DP83640_MISR_INT_MASK))
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static int dp83640_hwtstamp(struct mii_timestamper *mii_ts, struct ifreq *ifr)
{
struct dp83640_private *dp83640 =
@@ -1517,6 +1543,7 @@ static struct phy_driver dp83640_driver = {
.config_init = dp83640_config_init,
.ack_interrupt = dp83640_ack_interrupt,
.config_intr = dp83640_config_intr,
+ .handle_interrupt = dp83640_handle_interrupt,
};
static int __init dp83640_init(void)
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index c162c9551bd1..bb512ac3f533 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -303,6 +303,41 @@ static int dp83822_config_intr(struct phy_device *phydev)
return phy_write(phydev, MII_DP83822_PHYSCR, physcr_status);
}
+static irqreturn_t dp83822_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ /* The MISR1 and MISR2 registers are holding the interrupt status in
+ * the upper half (15:8), while the lower half (7:0) is used for
+ * controlling the interrupt enable state of those individual interrupt
+ * sources. To determine the possible interrupt sources, just read the
+ * MISR* register and use it directly to know which interrupts have
+ * been enabled previously or not.
+ */
+ irq_status = phy_read(phydev, MII_DP83822_MISR1);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+ if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+ goto trigger_machine;
+
+ irq_status = phy_read(phydev, MII_DP83822_MISR2);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+ if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+ goto trigger_machine;
+
+ return IRQ_NONE;
+
+trigger_machine:
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static int dp8382x_disable_wol(struct phy_device *phydev)
{
int value = DP83822_WOL_EN | DP83822_WOL_MAGIC_EN |
@@ -576,6 +611,7 @@ static int dp83822_resume(struct phy_device *phydev)
.set_wol = dp83822_set_wol, \
.ack_interrupt = dp83822_ack_interrupt, \
.config_intr = dp83822_config_intr, \
+ .handle_interrupt = dp83822_handle_interrupt, \
.suspend = dp83822_suspend, \
.resume = dp83822_resume, \
}
@@ -591,6 +627,7 @@ static int dp83822_resume(struct phy_device *phydev)
.set_wol = dp83822_set_wol, \
.ack_interrupt = dp83822_ack_interrupt, \
.config_intr = dp83822_config_intr, \
+ .handle_interrupt = dp83822_handle_interrupt, \
.suspend = dp83822_suspend, \
.resume = dp83822_resume, \
}
diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 54c7c1b44e4d..b707a9b27847 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -37,6 +37,20 @@
DP83848_MISR_SPD_INT_EN | \
DP83848_MISR_LINK_INT_EN)
+#define DP83848_MISR_RHF_INT BIT(8)
+#define DP83848_MISR_FHF_INT BIT(9)
+#define DP83848_MISR_ANC_INT BIT(10)
+#define DP83848_MISR_DUP_INT BIT(11)
+#define DP83848_MISR_SPD_INT BIT(12)
+#define DP83848_MISR_LINK_INT BIT(13)
+#define DP83848_MISR_ED_INT BIT(14)
+
+#define DP83848_INT_MASK \
+ (DP83848_MISR_ANC_INT | \
+ DP83848_MISR_DUP_INT | \
+ DP83848_MISR_SPD_INT | \
+ DP83848_MISR_LINK_INT)
+
static int dp83848_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, DP83848_MISR);
@@ -66,6 +80,24 @@ static int dp83848_config_intr(struct phy_device *phydev)
return phy_write(phydev, DP83848_MICR, control);
}
+static irqreturn_t dp83848_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ irq_status = phy_read(phydev, DP83848_MISR);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & DP83848_INT_MASK))
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static int dp83848_config_init(struct phy_device *phydev)
{
int val;
@@ -104,6 +136,7 @@ MODULE_DEVICE_TABLE(mdio, dp83848_tbl);
/* IRQ related */ \
.ack_interrupt = dp83848_ack_interrupt, \
.config_intr = dp83848_config_intr, \
+ .handle_interrupt = dp83848_handle_interrupt, \
}
static struct phy_driver dp83848_driver[] = {
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 69d3eacc2b96..aba4e4c1f75c 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -310,6 +310,30 @@ static int dp83867_config_intr(struct phy_device *phydev)
return phy_write(phydev, MII_DP83867_MICR, micr_status);
}
+static irqreturn_t dp83867_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status, irq_enabled;
+
+ irq_status = phy_read(phydev, MII_DP83867_ISR);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ irq_enabled = phy_read(phydev, MII_DP83867_MICR);
+ if (irq_enabled < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & irq_enabled))
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static int dp83867_read_status(struct phy_device *phydev)
{
int status = phy_read(phydev, MII_DP83867_PHYSTS);
@@ -827,6 +851,7 @@ static struct phy_driver dp83867_driver[] = {
/* IRQ related */
.ack_interrupt = dp83867_ack_interrupt,
.config_intr = dp83867_config_intr,
+ .handle_interrupt = dp83867_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
index cf6dec7b7d8e..487d1b8beec5 100644
--- a/drivers/net/phy/dp83869.c
+++ b/drivers/net/phy/dp83869.c
@@ -207,6 +207,30 @@ static int dp83869_config_intr(struct phy_device *phydev)
return phy_write(phydev, MII_DP83869_MICR, micr_status);
}
+static irqreturn_t dp83869_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status, irq_enabled;
+
+ irq_status = phy_read(phydev, MII_DP83869_ISR);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ irq_enabled = phy_read(phydev, MII_DP83869_MICR);
+ if (irq_enabled < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+
+ if (!(irq_status & irq_enabled))
+ return IRQ_NONE;
+
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static int dp83869_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
@@ -852,6 +876,7 @@ static struct phy_driver dp83869_driver[] = {
/* IRQ related */
.ack_interrupt = dp83869_ack_interrupt,
.config_intr = dp83869_config_intr,
+ .handle_interrupt = dp83869_handle_interrupt,
.read_status = dp83869_read_status,
.get_tunable = dp83869_get_tunable,
diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
index d73725312c7c..a93c64ac76a3 100644
--- a/drivers/net/phy/dp83tc811.c
+++ b/drivers/net/phy/dp83tc811.c
@@ -254,6 +254,49 @@ static int dp83811_config_intr(struct phy_device *phydev)
return err;
}
+static irqreturn_t dp83811_handle_interrupt(struct phy_device *phydev)
+{
+ int irq_status;
+
+ /* The INT_STAT registers 1, 2 and 3 are holding the interrupt status
+ * in the upper half (15:8), while the lower half (7:0) is used for
+ * controlling the interrupt enable state of those individual interrupt
+ * sources. To determine the possible interrupt sources, just read the
+ * INT_STAT* register and use it directly to know which interrupts have
+ * been enabled previously or not.
+ */
+ irq_status = phy_read(phydev, MII_DP83811_INT_STAT1);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+ if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+ goto trigger_machine;
+
+ irq_status = phy_read(phydev, MII_DP83811_INT_STAT2);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+ if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+ goto trigger_machine;
+
+ irq_status = phy_read(phydev, MII_DP83811_INT_STAT3);
+ if (irq_status < 0) {
+ phy_error(phydev);
+ return IRQ_NONE;
+ }
+ if (irq_status & ((irq_status & GENMASK(7, 0)) << 8))
+ goto trigger_machine;
+
+ return IRQ_NONE;
+
+trigger_machine:
+ phy_trigger_machine(phydev);
+
+ return IRQ_HANDLED;
+}
+
static int dp83811_config_aneg(struct phy_device *phydev)
{
int value, err;
@@ -345,6 +388,7 @@ static struct phy_driver dp83811_driver[] = {
.set_wol = dp83811_set_wol,
.ack_interrupt = dp83811_ack_interrupt,
.config_intr = dp83811_config_intr,
+ .handle_interrupt = dp83811_handle_interrupt,
.suspend = dp83811_suspend,
.resume = dp83811_resume,
},
--
2.28.0
Powered by blists - more mailing lists