Message-ID: <CY4PR1801MB20705DF5A12318AB80EDBD45DEFC0@CY4PR1801MB2070.namprd18.prod.outlook.com>
Date:   Mon, 23 Nov 2020 05:41:04 +0000
From:   Bhaskara Budiredla <bbudiredla@...vell.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>
CC:     Kees Cook <keescook@...omium.org>,
        Colin Cross <ccross@...roid.com>,
        "Tony Luck" <tony.luck@...el.com>,
        Sunil Kovvuri Goutham <sgoutham@...vell.com>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        "Linux Kernel Mailing List" <linux-kernel@...r.kernel.org>
Subject: RE: [EXT] Re: [PATCH v1 1/2] mmc: Support kmsg dumper based on
 pstore/blk

Big thanks Uffe, my answers in line to yours.

>-----Original Message-----
>From: Ulf Hansson <ulf.hansson@...aro.org>
>Sent: Friday, November 20, 2020 6:51 PM
>To: Bhaskara Budiredla <bbudiredla@...vell.com>
>Cc: Kees Cook <keescook@...omium.org>; Colin Cross
><ccross@...roid.com>; Tony Luck <tony.luck@...el.com>; Sunil Kovvuri
>Goutham <sgoutham@...vell.com>; linux-mmc@...r.kernel.org; Linux
>Kernel Mailing List <linux-kernel@...r.kernel.org>
>Subject: [EXT] Re: [PATCH v1 1/2] mmc: Support kmsg dumper based on
>pstore/blk
>
>External Email
>
>----------------------------------------------------------------------
>On Thu, 12 Nov 2020 at 07:24, Bhaskara Budiredla
><bbudiredla@...vell.com> wrote:
>>
>> This patch introduces to mmcpstore. The functioning of mmcpstore is is
>> similar to mtdpstore. mmcpstore works on FTL based flash devices
>> whereas mtdpstore works on raw flash devices. When the system crashes,
>> mmcpstore stores the kmsg panic and oops logs to a user specified MMC
>> device.
>>
>> It collects the details about the host MMC device through pstore/blk
>> "blkdev" parameter. The user can specify the MMC device in many ways
>> by checking in Documentation/admin-guide/pstore-blk.rst.
>>
>> The individual mmc host drivers have to define suitable polling
>> subroutines to write kmsg panic/oops logs through mmcpstore.
>
>I don't like that changes to host drivers are needed to support this, but
>perhaps there is no other good way!?

Yes, I couldn't think of a better way as polling functionality is host specific.

>
>>
>> Signed-off-by: Bhaskara Budiredla <bbudiredla@...vell.com>
>> ---
>>  drivers/mmc/core/Kconfig     |   7 +
>>  drivers/mmc/core/Makefile    |   1 +
>>  drivers/mmc/core/block.c     |  20 +++
>>  drivers/mmc/core/block.h     |   3 +
>>  drivers/mmc/core/core.c      |  24 +++
>>  drivers/mmc/core/mmcpstore.c | 318
>+++++++++++++++++++++++++++++++++++
>>  include/linux/mmc/card.h     |   4 +
>>  include/linux/mmc/core.h     |   4 +
>>  include/linux/mmc/host.h     |   6 +
>>  9 files changed, 387 insertions(+)
>>  create mode 100644 drivers/mmc/core/mmcpstore.c
>>
>> diff --git a/drivers/mmc/core/Kconfig b/drivers/mmc/core/Kconfig index
>> c12fe13e4b14..cafb367c482d 100644
>> --- a/drivers/mmc/core/Kconfig
>> +++ b/drivers/mmc/core/Kconfig
>> @@ -81,3 +81,10 @@ config MMC_TEST
>>           This driver is only of interest to those developing or
>>           testing a host driver. Most people should say N here.
>>
>> +config MMC_PSTORE
>> +       bool "Log panic/oops to a MMC buffer"
>> +       depends on PSTORE
>> +       depends on PSTORE_BLK
>> +       help
>> +         Backend driver to store the kmsg crash dumps to a user specified
>MMC
>> +         device. The driver is based on pstore/blk.
>> diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile
>> index 95ffe008ebdf..5f4230b79ac6 100644
>> --- a/drivers/mmc/core/Makefile
>> +++ b/drivers/mmc/core/Makefile
>> @@ -17,4 +17,5 @@ mmc_core-$(CONFIG_DEBUG_FS)   += debugfs.o
>>  obj-$(CONFIG_MMC_BLOCK)                += mmc_block.o
>>  mmc_block-objs                 := block.o queue.o
>>  obj-$(CONFIG_MMC_TEST)         += mmc_test.o
>> +obj-$(CONFIG_MMC_PSTORE)       += mmcpstore.o
>>  obj-$(CONFIG_SDIO_UART)                += sdio_uart.o
>> diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index
>> 8d3df0be0355..f11c21d60b67 100644
>> --- a/drivers/mmc/core/block.c
>> +++ b/drivers/mmc/core/block.c
>> @@ -2870,6 +2870,21 @@ static void mmc_blk_remove_debugfs(struct
>> mmc_card *card,
>>
>>  #endif /* CONFIG_DEBUG_FS */
>>
>> +#ifdef CONFIG_MMC_PSTORE
>> +sector_t mmc_blk_get_part(struct mmc_card *card, int part_num,
>> +sector_t *size) {
>> +       struct mmc_blk_data *md = dev_get_drvdata(&card->dev);
>> +       struct gendisk *disk = md->disk;
>> +       struct disk_part_tbl *part_tbl = disk->part_tbl;
>> +
>> +       if (part_num < 0 || part_num >= part_tbl->len)
>> +               return 0;
>> +
>> +       *size = part_tbl->part[part_num]->nr_sects << SECTOR_SHIFT;
>> +       return part_tbl->part[part_num]->start_sect;
>> +}
>> +#endif
>> +
>>  static int mmc_blk_probe(struct mmc_card *card)  {
>>         struct mmc_blk_data *md, *part_md; @@ -2913,6 +2928,11 @@
>> static int mmc_blk_probe(struct mmc_card *card)
>>                         goto out;
>>         }
>>
>> +#ifdef CONFIG_MMC_PSTORE
>
>Avoid using ifdefs in common functions like these, please. I think it's more
>clean to add a stub function and then just call it unconditionally here.

Sure, will do this.

>
>> +       if (mmc_card_mmc(card) || mmc_card_sd(card))
>> +               mmcpstore_card_set(card, md->disk->disk_name); #endif
>> +
>>         /* Add two debugfs entries */
>>         mmc_blk_add_debugfs(card, md);
>>
>> diff --git a/drivers/mmc/core/block.h b/drivers/mmc/core/block.h index
>> 31153f656f41..2a2b81635508 100644
>> --- a/drivers/mmc/core/block.h
>> +++ b/drivers/mmc/core/block.h
>> @@ -16,5 +16,8 @@ void mmc_blk_mq_recovery(struct mmc_queue *mq);
>> struct work_struct;
>>
>>  void mmc_blk_mq_complete_work(struct work_struct *work);
>> +#ifdef CONFIG_MMC_PSTORE
>> +sector_t mmc_blk_get_part(struct mmc_card *card, int part_num,
>> +sector_t *size); #endif
>>
>>  #endif
>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index
>> d42037f0f10d..7cc3d81f6a9a 100644
>> --- a/drivers/mmc/core/core.c
>> +++ b/drivers/mmc/core/core.c
>> @@ -569,6 +569,30 @@ int mmc_cqe_recovery(struct mmc_host *host)  }
>> EXPORT_SYMBOL(mmc_cqe_recovery);
>>
>> +
>> +#ifdef CONFIG_MMC_PSTORE
>> +/**
>> + *     mmc_wait_for_pstore_req - initiate a blocking mmc request
>> + *     @host: MMC host to start command
>> + *     @mrq: MMC request to start
>> + *
>> + *     Start a new MMC custom command request for a host, and
>> + *     wait for the command to complete based on request data timeout.
>> + */
>> +void mmc_wait_for_pstore_req(struct mmc_host *host, struct
>> +mmc_request *mrq) {
>> +       unsigned int timeout;
>> +
>> +       host->ops->req_cleanup_pending(host);
>> +       mmc_start_request(host, mrq);
>> +
>> +       if (mrq->data) {
>> +               timeout = mrq->data->timeout_ns / NSEC_PER_MSEC;
>> +               host->ops->req_completion_poll(host, timeout);
>> +       }
>> +}
>
>As I said above, I would like to avoid host specific deployments from being
>needed. Is there a way we can avoid this?
>

I don't see an alternative.

>> +#endif
>> +
>>  /**
>>   *     mmc_is_req_done - Determine if a 'cap_cmd_during_tfr' request is
>done
>>   *     @host: MMC host
>> diff --git a/drivers/mmc/core/mmcpstore.c
>> b/drivers/mmc/core/mmcpstore.c new file mode 100644 index
>> 000000000000..ffa44c859e10
>> --- /dev/null
>> +++ b/drivers/mmc/core/mmcpstore.c
>> @@ -0,0 +1,318 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +
>> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/pstore_blk.h>
>> +#include <linux/blkdev.h>
>> +#include <linux/mount.h>
>> +#include <linux/slab.h>
>> +#include <linux/mmc/mmc.h>
>> +#include <linux/mmc/host.h>
>> +#include <linux/mmc/card.h>
>> +#include <linux/scatterlist.h>
>> +#include "block.h"
>> +#include "card.h"
>> +#include "core.h"
>> +
>> +static struct mmcpstore_context {
>> +       char dev_name[BDEVNAME_SIZE];
>> +       int partno;
>> +       sector_t start_sect;
>> +       sector_t size;
>> +       struct pstore_device_info dev;
>> +       struct pstore_blk_config conf;
>> +       struct pstore_blk_info info;
>> +
>> +       char *sub;
>> +       struct mmc_card *card;
>> +       struct mmc_request *mrq;
>> +} oops_cxt;
>> +
>> +static void mmc_prep_req(struct mmc_request *mrq,
>> +               unsigned int sect_offset, unsigned int nsects,
>> +               struct scatterlist *sg, u32 opcode, unsigned int
>> +flags) {
>> +       mrq->cmd->opcode = opcode;
>> +       mrq->cmd->arg = sect_offset;
>> +       mrq->cmd->flags = MMC_RSP_R1 | MMC_CMD_ADTC;
>> +
>> +       if (nsects == 1) {
>> +               mrq->stop = NULL;
>> +       } else {
>> +               mrq->stop->opcode = MMC_STOP_TRANSMISSION;
>> +               mrq->stop->arg = 0;
>> +               mrq->stop->flags = MMC_RSP_R1B | MMC_CMD_AC;
>> +       }
>> +
>> +       mrq->data->blksz = SECTOR_SIZE;
>> +       mrq->data->blocks = nsects;
>> +       mrq->data->flags = flags;
>> +       mrq->data->sg = sg;
>> +       mrq->data->sg_len = 1;
>> +}
>> +
>> +static int mmcpstore_rdwr_req(const char *buf, unsigned int nsects,
>> +                       unsigned int sect_offset, unsigned int flags)
>> +{
>> +       struct mmcpstore_context *cxt = &oops_cxt;
>> +       struct mmc_request *mrq = cxt->mrq;
>> +       struct mmc_card *card = cxt->card;
>> +       struct mmc_host *host = card->host;
>> +       struct scatterlist sg;
>> +       u32 opcode;
>> +
>> +       if (flags == MMC_DATA_READ)
>> +               opcode  = (nsects > 1) ?
>> +                       MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK;
>> +       else
>> +               opcode = (nsects > 1) ?
>> +                       MMC_WRITE_MULTIPLE_BLOCK : MMC_WRITE_BLOCK;
>> +
>> +       mmc_prep_req(mrq, sect_offset, nsects, &sg, opcode, flags);
>> +       sg_init_one(&sg, buf, (nsects << SECTOR_SHIFT));
>> +       mmc_set_data_timeout(mrq->data, cxt->card);
>> +
>> +       mmc_claim_host(host);
>> +       mmc_wait_for_req(host, mrq);
>> +       mdelay(mrq->data->timeout_ns / NSEC_PER_MSEC);
>> +       mmc_release_host(host);
>> +
>> +       if (mrq->cmd->error) {
>> +               pr_err("Cmd error: %d\n", mrq->cmd->error);
>> +               return mrq->cmd->error;
>> +       }
>> +       if (mrq->data->error) {
>> +               pr_err("Data error: %d\n", mrq->data->error);
>> +               return mrq->data->error;
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>> +static ssize_t mmcpstore_write(const char *buf, size_t size, loff_t
>> +off) {
>> +       struct mmcpstore_context *cxt = &oops_cxt;
>> +       int ret;
>> +
>> +       ret = mmcpstore_rdwr_req(buf, (size >> SECTOR_SHIFT),
>> +               cxt->start_sect + (off >> SECTOR_SHIFT), MMC_DATA_WRITE);
>> +       if (ret)
>> +               return ret;
>> +
>> +       return size;
>> +}
>> +
>> +static ssize_t mmcpstore_read(char *buf, size_t size, loff_t off) {
>> +       struct mmcpstore_context *cxt = &oops_cxt;
>> +       unsigned int sect_off = cxt->start_sect  + (off >> SECTOR_SHIFT);
>> +       unsigned long sects = (cxt->conf.kmsg_size >> SECTOR_SHIFT);
>> +       int ret;
>> +
>> +       if (unlikely(!buf || !size))
>> +               return -EINVAL;
>> +
>> +       ret = mmcpstore_rdwr_req(cxt->sub, sects, sect_off,
>MMC_DATA_READ);
>> +       if (ret)
>> +               return ret;
>> +       memcpy(buf, cxt->sub, size);
>> +
>> +       return size;
>> +}
>> +
>> +static void mmcpstore_panic_write_req(const char *buf,
>> +               unsigned int nsects, unsigned int sect_offset) {
>> +       struct mmcpstore_context *cxt = &oops_cxt;
>> +       struct mmc_request *mrq = cxt->mrq;
>> +       struct mmc_card *card = cxt->card;
>> +       struct mmc_host *host = card->host;
>> +       struct scatterlist sg;
>> +       u32 opcode;
>> +
>> +       opcode = (nsects > 1) ? MMC_WRITE_MULTIPLE_BLOCK :
>MMC_WRITE_BLOCK;
>> +       mmc_prep_req(mrq, sect_offset, nsects, &sg, opcode,
>MMC_DATA_WRITE);
>> +       sg_init_one(&sg, buf, (nsects << SECTOR_SHIFT));
>> +       mmc_set_data_timeout(mrq->data, cxt->card);
>> +
>> +       mmc_claim_host(host);
>> +       mmc_wait_for_pstore_req(host, mrq);
>> +       mmc_release_host(card->host);
>> +}
>> +
>> +static ssize_t mmcpstore_panic_write(const char *buf, size_t size,
>> +loff_t off) {
>> +       struct mmcpstore_context *cxt = &oops_cxt;
>> +
>> +       mmcpstore_panic_write_req(buf, (size >> SECTOR_SHIFT),
>> +                       cxt->start_sect + (off >> SECTOR_SHIFT));
>> +       return size;
>> +}
>> +
>> +static struct block_device *mmcpstore_open_backend(const char
>> +*device) {
>> +       struct block_device *bdev;
>> +       dev_t devt;
>> +
>> +       bdev = blkdev_get_by_path(device, FMODE_READ, NULL);
>> +       if (IS_ERR(bdev)) {
>> +               devt = name_to_dev_t(device);
>> +               if (devt == 0)
>> +                       return ERR_PTR(-ENODEV);
>> +
>> +               bdev = blkdev_get_by_dev(devt, FMODE_READ, NULL);
>> +               if (IS_ERR(bdev))
>> +                       return bdev;
>> +       }
>> +
>> +       return bdev;
>> +}
>> +
>> +static void mmcpstore_close_backend(struct block_device *bdev) {
>> +       if (!bdev)
>> +               return;
>> +       blkdev_put(bdev, FMODE_READ);
>> +}
>> +
>> +void mmcpstore_card_set(struct mmc_card *card, const char *disk_name)
>> +{
>> +       struct mmcpstore_context *cxt = &oops_cxt;
>> +       struct pstore_blk_config *conf = &cxt->conf;
>> +       struct pstore_device_info *dev = &cxt->dev;
>> +       struct block_device *bdev;
>> +       struct mmc_command *stop;
>> +       struct mmc_command *cmd;
>> +       struct mmc_request *mrq;
>> +       struct mmc_data *data;
>> +       int ret;
>> +
>> +       if (!conf->device[0])
>> +               return;
>> +
>> +       /* Multiple backend devices not allowed */
>> +       if (cxt->dev_name[0])
>> +               return;
>> +
>> +       bdev =  mmcpstore_open_backend(conf->device);
>> +       if (IS_ERR(bdev)) {
>> +               pr_err("%s failed to open with %ld\n",
>> +                               conf->device, PTR_ERR(bdev));
>> +               return;
>> +       }
>> +
>> +       bdevname(bdev, cxt->dev_name);
>> +       cxt->partno = bdev->bd_part->partno;
>> +       mmcpstore_close_backend(bdev);
>> +
>> +       if (strncmp(cxt->dev_name, disk_name, strlen(disk_name)))
>> +               return;
>> +
>> +       cxt->start_sect = mmc_blk_get_part(card, cxt->partno, &cxt->size);
>> +       if (!cxt->start_sect) {
>> +               pr_err("Non-existent partition %d selected\n", cxt->partno);
>> +               return;
>> +       }
>> +
>> +       /* Check for host mmc panic write polling function definitions */
>> +       if (!card->host->ops->req_cleanup_pending ||
>> +                       !card->host->ops->req_completion_poll)
>> +               return;
>> +
>> +       cxt->card = card;
>> +
>> +       cxt->sub = kmalloc(conf->kmsg_size, GFP_KERNEL);
>> +       if (!cxt->sub)
>> +               goto out;
>> +
>> +       mrq = kzalloc(sizeof(struct mmc_request), GFP_KERNEL);
>> +       if (!mrq)
>> +               goto free_sub;
>> +
>> +       cmd = kzalloc(sizeof(struct mmc_command), GFP_KERNEL);
>> +       if (!cmd)
>> +               goto free_mrq;
>> +
>> +       stop = kzalloc(sizeof(struct mmc_command), GFP_KERNEL);
>> +       if (!stop)
>> +               goto free_cmd;
>> +
>> +       data = kzalloc(sizeof(struct mmc_data), GFP_KERNEL);
>> +       if (!data)
>> +               goto free_stop;
>> +
>> +       mrq->cmd = cmd;
>> +       mrq->data = data;
>> +       mrq->stop = stop;
>> +       cxt->mrq = mrq;
>> +
>> +       dev->total_size = cxt->size;
>> +       dev->flags = PSTORE_FLAGS_DMESG;
>> +       dev->read = mmcpstore_read;
>> +       dev->write = mmcpstore_write;
>> +       dev->erase = NULL;
>> +       dev->panic_write = mmcpstore_panic_write;
>> +
>> +       ret = register_pstore_device(&cxt->dev);
>
>By looking at all of the code above, lots are duplicated from the mmc block
>device implementation. Isn't there a way to make the pstore block device to
>push a request through the regular blk-mq path instead?
>
The regular path has pre, post processing’s and locking semantics that
are not suitable for panic write scenario. Further, the locking mechanisms are
implemented in host drivers. This is preferred to quickly complete the write
before the kernel dies.

>That said, I wonder why you don't call register_pstore_blk(), as I thought that
>was the interface to be used for regular block devices, no?
>
register_pstore_blk() is for arbitrary block devices for which best effort is not defined.
>
>> +       if (ret) {
>> +               pr_err("%s registering with psblk failed (%d)\n",
>> +                               cxt->dev_name, ret);
>> +               goto free_data;
>> +       }
>> +
>> +       pr_info("%s registered as psblk backend\n", cxt->dev_name);
>> +       return;
>> +
>> +free_data:
>> +       kfree(data);
>> +free_stop:
>> +       kfree(stop);
>> +free_cmd:
>> +       kfree(cmd);
>> +free_mrq:
>> +       kfree(mrq);
>> +free_sub:
>> +       kfree(cxt->sub);
>> +out:
>> +       return;
>> +}
>> +EXPORT_SYMBOL(mmcpstore_card_set);
>> +
>> +static int __init mmcpstore_init(void) {
>> +       struct mmcpstore_context *cxt = &oops_cxt;
>> +       struct pstore_blk_config *conf = &cxt->conf;
>> +       int err;
>> +
>> +       err = pstore_blk_get_config(conf);
>> +       if (unlikely(err))
>> +               return err;
>
>Looks like that this can be moved to mmc_blk_probe() function instead.
>
I will move this to mmcpstore_card_set, which in turn would be called from mmc_blk_probe()

>> +
>> +       if (!conf->device[0]) {
>> +               pr_err("psblk backend is empty\n");
>> +               return -EINVAL;
>> +       }
>> +
>> +       return err;
>> +}
>> +
>> +static void __exit mmcpstore_exit(void) {
>> +       struct mmcpstore_context *cxt = &oops_cxt;
>> +
>> +       unregister_pstore_device(&cxt->dev);
>> +       kfree(cxt->mrq->data);
>> +       kfree(cxt->mrq->stop);
>> +       kfree(cxt->mrq->cmd);
>> +       kfree(cxt->mrq);
>> +       kfree(cxt->sub);
>> +       cxt->card = NULL;
>
>Can we do this via mmc_blk_remove() instead?
>
The unregisters here are related to mmcpstore, nothing specific to card. Anyhow, 
I would like to make a small change to compile mmcpstore as part of mmc blk.

>> +}
>> +
>> +module_init(mmcpstore_init);
>> +module_exit(mmcpstore_exit);
>> +
>> +MODULE_AUTHOR("Bhaskara Budiredla <bbudiredla@...vell.com>");
>> +MODULE_DESCRIPTION("MMC backend for pstore/blk");
>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index
>> 42df06c6b19c..76ae8ae61d31 100644
>> --- a/include/linux/mmc/card.h
>> +++ b/include/linux/mmc/card.h
>> @@ -322,6 +322,10 @@ static inline bool mmc_large_sector(struct
>> mmc_card *card)
>>
>>  bool mmc_card_is_blockaddr(struct mmc_card *card);
>>
>> +#ifdef CONFIG_MMC_PSTORE
>> +void mmcpstore_card_set(struct mmc_card *card, const char
>> +*disk_name); #endif /* CONFIG_MMC_PSTORE */
>> +
>>  #define mmc_card_mmc(c)                ((c)->type == MMC_TYPE_MMC)
>>  #define mmc_card_sd(c)         ((c)->type == MMC_TYPE_SD)
>>  #define mmc_card_sdio(c)       ((c)->type == MMC_TYPE_SDIO)
>> diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index
>> 29aa50711626..21dcd79f8f0e 100644
>> --- a/include/linux/mmc/core.h
>> +++ b/include/linux/mmc/core.h
>> @@ -166,6 +166,10 @@ struct mmc_request {
>>
>>  struct mmc_card;
>>
>> +#ifdef CONFIG_MMC_PSTORE
>> +extern void mmc_wait_for_pstore_req(struct mmc_host *, struct
>> +mmc_request *); #endif /* CONFIG_MMC_PSTORE */
>> +
>>  void mmc_wait_for_req(struct mmc_host *host, struct mmc_request
>> *mrq);  int mmc_wait_for_cmd(struct mmc_host *host, struct
>mmc_command *cmd,
>>                 int retries);
>> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index
>> c079b932330f..ef57313ee3ea 100644
>> --- a/include/linux/mmc/host.h
>> +++ b/include/linux/mmc/host.h
>> @@ -173,6 +173,12 @@ struct mmc_host_ops {
>>          */
>>         int     (*multi_io_quirk)(struct mmc_card *card,
>>                                   unsigned int direction, int
>> blk_size);
>> +
>> +#ifdef CONFIG_MMC_PSTORE
>> +       void    (*req_cleanup_pending)(struct mmc_host *host);
>> +       int     (*req_completion_poll)(struct mmc_host *host,
>> +                                       unsigned long timeout);
>
>If these really will be needed, please add some comments about what they
>are intended to help with.
>
Sure, will add the comments.

>> +#endif
>>  };
>>
>>  struct mmc_cqe_ops {
>
>Kind regards
>Uffe

Thanks,
Bhaskara

Powered by blists - more mailing lists