| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAMGffEkqhBoV6R85f7Wua-6XtsSS4KivZFunFdEpeLNZP+Df7A@mail.gmail.com>
Date: Mon, 23 Nov 2020 06:50:11 +0100
From: Jinpu Wang <jinpu.wang@...ud.ionos.com>
To: Joe Perches <joe@...ches.com>
Cc: Lee Jones <lee.jones@...aro.org>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Linux SCSI Mailinglist <linux-scsi@...r.kernel.org>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] scsi: pm8001: Neaten debug logging macros and uses
On Sat, Nov 21, 2020 at 12:16 AM Joe Perches <joe@...ches.com> wrote:
>
> Every PM8001_<FOO>_DBG macro uses an internal call to pm8001_printk.
>
> Convert all uses of
> PM8001_<FOO>_DBG(hba, pm8001_printk(fmt, ...))
> to
> pm8001_dbg(hba, <FOO>, fmt, ...)
>
> so the visual complexity of each macro is reduced.
>
> The repetitive macro definitions are converted to a single pm8001_dbg
> and the level is concatenated using PM8001_##level##_LOGGING for the
> specific level test.
>
> Done with coccinelle, checkpatch and a little typing of the new macro
> definition.
>
> Miscellanea:
>
> o Coalesce formats
> o Realign arguments
> o Add missing terminating newlines to formats
> o Remove trailing spaces from formats
> o Change defective loop with printk(KERN_INFO... to emit a
> 16 byte hex block to %p16h
>
> Signed-off-by: Joe Perches <joe@...ches.com>
This is a nice clean up,
Thank you, Joe!
Acked-by: Jack Wang <jinpu.wang@...ud.ionos.com>
> ---
> drivers/scsi/pm8001/pm8001_ctl.c | 7 +-
> drivers/scsi/pm8001/pm8001_hwi.c | 1370 ++++++++++---------------
> drivers/scsi/pm8001/pm8001_init.c | 91 +-
> drivers/scsi/pm8001/pm8001_sas.c | 132 +--
> drivers/scsi/pm8001/pm8001_sas.h | 45 +-
> drivers/scsi/pm8001/pm80xx_hwi.c | 1596 ++++++++++++-----------------
> 6 files changed, 1354 insertions(+), 1887 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
> index 3587f7c8a428..12035baf0997 100644
> --- a/drivers/scsi/pm8001/pm8001_ctl.c
> +++ b/drivers/scsi/pm8001/pm8001_ctl.c
> @@ -841,10 +841,9 @@ static ssize_t pm8001_store_update_fw(struct device *cdev,
> pm8001_ha->dev);
>
> if (ret) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk(
> - "Failed to load firmware image file %s, error %d\n",
> - filename_ptr, ret));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Failed to load firmware image file %s, error %d\n",
> + filename_ptr, ret);
> pm8001_ha->fw_status = FAIL_OPEN_BIOS_FILE;
> goto out;
> }
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
> index 0a1e09b1cd58..08d6cc9b50db 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.c
> +++ b/drivers/scsi/pm8001/pm8001_hwi.c
> @@ -400,9 +400,9 @@ int pm8001_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
> } while ((regVal != shiftValue) && time_before(jiffies, start));
>
> if (regVal != shiftValue) {
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW"
> - " = 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT,
> + "TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW = 0x%x\n",
> + regVal);
> return -1;
> }
> return 0;
> @@ -623,12 +623,10 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
>
> value = pm8001_cr32(pm8001_ha, 0, 0x44);
> offset = value & 0x03FFFFFF;
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Scratchpad 0 Offset: %x\n", offset));
> + pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 Offset: %x\n", offset);
> pcilogic = (value & 0xFC000000) >> 26;
> pcibar = get_pci_bar_index(pcilogic);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar));
> + pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar);
> pm8001_ha->main_cfg_tbl_addr = base_addr =
> pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
> pm8001_ha->general_stat_tbl_addr =
> @@ -652,16 +650,15 @@ static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
> * as this is shared with BIOS data */
> if (deviceid == 0x8081 || deviceid == 0x0042) {
> if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Shift Bar4 to 0x%x failed\n",
> - GSM_SM_BASE));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Shift Bar4 to 0x%x failed\n",
> + GSM_SM_BASE);
> return -1;
> }
> }
> /* check the firmware status */
> if (-1 == check_fw_ready(pm8001_ha)) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Firmware is not ready!\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Firmware is not ready!\n");
> return -EBUSY;
> }
>
> @@ -686,8 +683,7 @@ static int pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
> }
> /* notify firmware update finished and check initialization status */
> if (0 == mpi_init_check(pm8001_ha)) {
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("MPI initialize successful!\n"));
> + pm8001_dbg(pm8001_ha, INIT, "MPI initialize successful!\n");
> } else
> return -EBUSY;
> /*This register is a 16-bit timer with a resolution of 1us. This is the
> @@ -709,9 +705,9 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
> pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
> if (deviceid == 0x8081 || deviceid == 0x0042) {
> if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_SM_BASE)) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Shift Bar4 to 0x%x failed\n",
> - GSM_SM_BASE));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Shift Bar4 to 0x%x failed\n",
> + GSM_SM_BASE);
> return -1;
> }
> }
> @@ -729,8 +725,8 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
> } while ((value != 0) && (--max_wait_count));
>
> if (!max_wait_count) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("TIMEOUT:IBDB value/=0x%x\n", value));
> + pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:IBDB value/=0x%x\n",
> + value);
> return -1;
> }
>
> @@ -747,9 +743,8 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
> break;
> } while (--max_wait_count);
> if (!max_wait_count) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk(" TIME OUT MPI State = 0x%x\n",
> - gst_len_mpistate & GST_MPI_STATE_MASK));
> + pm8001_dbg(pm8001_ha, FAIL, " TIME OUT MPI State = 0x%x\n",
> + gst_len_mpistate & GST_MPI_STATE_MASK);
> return -1;
> }
> return 0;
> @@ -763,25 +758,23 @@ static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha)
> {
> u32 regVal, regVal1, regVal2;
> if (mpi_uninit_check(pm8001_ha) != 0) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MPI state is not ready\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "MPI state is not ready\n");
> return -1;
> }
> /* read the scratch pad 2 register bit 2 */
> regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
> & SCRATCH_PAD2_FWRDY_RST;
> if (regVal == SCRATCH_PAD2_FWRDY_RST) {
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Firmware is ready for reset .\n"));
> + pm8001_dbg(pm8001_ha, INIT, "Firmware is ready for reset.\n");
> } else {
> unsigned long flags;
> /* Trigger NMI twice via RB6 */
> spin_lock_irqsave(&pm8001_ha->lock, flags);
> if (-1 == pm8001_bar4_shift(pm8001_ha, RB6_ACCESS_REG)) {
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Shift Bar4 to 0x%x failed\n",
> - RB6_ACCESS_REG));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Shift Bar4 to 0x%x failed\n",
> + RB6_ACCESS_REG);
> return -1;
> }
> pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET,
> @@ -794,16 +787,14 @@ static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha)
> if (regVal != SCRATCH_PAD2_FWRDY_RST) {
> regVal1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
> regVal2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("TIMEOUT:MSGU_SCRATCH_PAD1"
> - "=0x%x, MSGU_SCRATCH_PAD2=0x%x\n",
> - regVal1, regVal2));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
> + pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:MSGU_SCRATCH_PAD1=0x%x, MSGU_SCRATCH_PAD2=0x%x\n",
> + regVal1, regVal2);
> + pm8001_dbg(pm8001_ha, FAIL,
> + "SCRATCH_PAD0 value = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "SCRATCH_PAD3 value = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3));
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> return -1;
> }
> @@ -828,7 +819,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
>
> /* step1: Check FW is ready for soft reset */
> if (soft_reset_ready_check(pm8001_ha) != 0) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("FW is not ready\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "FW is not ready\n");
> return -1;
> }
>
> @@ -838,46 +829,43 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> spin_lock_irqsave(&pm8001_ha->lock, flags);
> if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) {
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Shift Bar4 to 0x%x failed\n",
> - MBIC_AAP1_ADDR_BASE));
> + pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
> + MBIC_AAP1_ADDR_BASE);
> return -1;
> }
> regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("MBIC - NMI Enable VPE0 (IOP)= 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT, "MBIC - NMI Enable VPE0 (IOP)= 0x%x\n",
> + regVal);
> pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP, 0x0);
> /* map 0x70000 to BAR4(0x20), BAR2(win) */
> if (-1 == pm8001_bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) {
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Shift Bar4 to 0x%x failed\n",
> - MBIC_IOP_ADDR_BASE));
> + pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
> + MBIC_IOP_ADDR_BASE);
> return -1;
> }
> regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT, "MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n",
> + regVal);
> pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1, 0x0);
>
> regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("PCIE -Event Interrupt Enable = 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT, "PCIE -Event Interrupt Enable = 0x%x\n",
> + regVal);
> pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE, 0x0);
>
> regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("PCIE - Event Interrupt = 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT, "PCIE - Event Interrupt = 0x%x\n",
> + regVal);
> pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT, regVal);
>
> regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("PCIE -Error Interrupt Enable = 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT, "PCIE -Error Interrupt Enable = 0x%x\n",
> + regVal);
> pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE, 0x0);
>
> regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("PCIE - Error Interrupt = 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT, "PCIE - Error Interrupt = 0x%x\n", regVal);
> pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT, regVal);
>
> /* read the scratch pad 1 register bit 2 */
> @@ -893,15 +881,13 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> /* map 0x0700000 to BAR4(0x20), BAR2(win) */
> if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Shift Bar4 to 0x%x failed\n",
> - GSM_ADDR_BASE));
> + pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
> + GSM_ADDR_BASE);
> return -1;
> }
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x0(0x00007b88)-GSM Configuration and"
> - " Reset = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x0(0x00007b88)-GSM Configuration and Reset = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
>
> /* step 3: host read GSM Configuration and Reset register */
> regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
> @@ -916,59 +902,52 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> regVal &= ~(0x00003b00);
> /* host write GSM Configuration and Reset register */
> pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM "
> - "Configuration and Reset is set to = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM Configuration and Reset is set to = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
>
> /* step 4: */
> /* disable GSM - Read Address Parity Check */
> regVal1 = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x700038 - Read Address Parity Check "
> - "Enable = 0x%x\n", regVal1));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x700038 - Read Address Parity Check Enable = 0x%x\n",
> + regVal1);
> pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, 0x0);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
> - "is set to = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x700038 - Read Address Parity Check Enable is set to = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK));
>
> /* disable GSM - Write Address Parity Check */
> regVal2 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x700040 - Write Address Parity Check"
> - " Enable = 0x%x\n", regVal2));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x700040 - Write Address Parity Check Enable = 0x%x\n",
> + regVal2);
> pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, 0x0);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x700040 - Write Address Parity Check "
> - "Enable is set to = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x700040 - Write Address Parity Check Enable is set to = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK));
>
> /* disable GSM - Write Data Parity Check */
> regVal3 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x300048 - Write Data Parity Check"
> - " Enable = 0x%x\n", regVal3));
> + pm8001_dbg(pm8001_ha, INIT, "GSM 0x300048 - Write Data Parity Check Enable = 0x%x\n",
> + regVal3);
> pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, 0x0);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x300048 - Write Data Parity Check Enable"
> - "is set to = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x300048 - Write Data Parity Check Enable is set to = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));
>
> /* step 5: delay 10 usec */
> udelay(10);
> /* step 5-b: set GPIO-0 output control to tristate anyway */
> if (-1 == pm8001_bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) {
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Shift Bar4 to 0x%x failed\n",
> - GPIO_ADDR_BASE));
> + pm8001_dbg(pm8001_ha, INIT, "Shift Bar4 to 0x%x failed\n",
> + GPIO_ADDR_BASE);
> return -1;
> }
> regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GPIO Output Control Register:"
> - " = 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT, "GPIO Output Control Register: = 0x%x\n",
> + regVal);
> /* set GPIO-0 output control to tri-state */
> regVal &= 0xFFFFFFFC;
> pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal);
> @@ -977,23 +956,20 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> /* map 0x00000 to BAR4(0x20), BAR2(win) */
> if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
> - SPC_TOP_LEVEL_ADDR_BASE));
> + pm8001_dbg(pm8001_ha, FAIL, "SPC Shift Bar4 to 0x%x failed\n",
> + SPC_TOP_LEVEL_ADDR_BASE);
> return -1;
> }
> regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Top Register before resetting IOP/AAP1"
> - ":= 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT, "Top Register before resetting IOP/AAP1:= 0x%x\n",
> + regVal);
> regVal &= ~(SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
> pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
>
> /* step 7: Reset the BDMA/OSSP */
> regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Top Register before resetting BDMA/OSSP"
> - ": = 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT, "Top Register before resetting BDMA/OSSP: = 0x%x\n",
> + regVal);
> regVal &= ~(SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
> pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
>
> @@ -1002,9 +978,9 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
>
> /* step 9: bring the BDMA and OSSP out of reset */
> regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Top Register before bringing up BDMA/OSSP"
> - ":= 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT,
> + "Top Register before bringing up BDMA/OSSP:= 0x%x\n",
> + regVal);
> regVal |= (SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
> pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
>
> @@ -1015,14 +991,13 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> /* map 0x0700000 to BAR4(0x20), BAR2(win) */
> if (-1 == pm8001_bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
> - GSM_ADDR_BASE));
> + pm8001_dbg(pm8001_ha, FAIL, "SPC Shift Bar4 to 0x%x failed\n",
> + GSM_ADDR_BASE);
> return -1;
> }
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x0 (0x00007b88)-GSM Configuration and "
> - "Reset = 0x%x\n", pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x0 (0x00007b88)-GSM Configuration and Reset = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
> regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
> /* Put those bits to high */
> /* GSM XCBI offset = 0x70 0000
> @@ -1034,44 +1009,37 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> */
> regVal |= (GSM_CONFIG_RESET_VALUE);
> pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM (0x00004088 ==> 0x00007b88) - GSM"
> - " Configuration and Reset is set to = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
> + pm8001_dbg(pm8001_ha, INIT, "GSM (0x00004088 ==> 0x00007b88) - GSM Configuration and Reset is set to = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET));
>
> /* step 12: Restore GSM - Read Address Parity Check */
> regVal = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
> /* just for debugging */
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
> - " = 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x700038 - Read Address Parity Check Enable = 0x%x\n",
> + regVal);
> pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, regVal1);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x700038 - Read Address Parity"
> - " Check Enable is set to = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
> + pm8001_dbg(pm8001_ha, INIT, "GSM 0x700038 - Read Address Parity Check Enable is set to = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK));
> /* Restore GSM - Write Address Parity Check */
> regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
> pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, regVal2);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x700040 - Write Address Parity Check"
> - " Enable is set to = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x700040 - Write Address Parity Check Enable is set to = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK));
> /* Restore GSM - Write Data Parity Check */
> regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
> pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GSM 0x700048 - Write Data Parity Check Enable"
> - "is set to = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
> + pm8001_dbg(pm8001_ha, INIT,
> + "GSM 0x700048 - Write Data Parity Check Enableis set to = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));
>
> /* step 13: bring the IOP and AAP1 out of reset */
> /* map 0x00000 to BAR4(0x20), BAR2(win) */
> if (-1 == pm8001_bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Shift Bar4 to 0x%x failed\n",
> - SPC_TOP_LEVEL_ADDR_BASE));
> + pm8001_dbg(pm8001_ha, FAIL, "Shift Bar4 to 0x%x failed\n",
> + SPC_TOP_LEVEL_ADDR_BASE);
> return -1;
> }
> regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
> @@ -1094,22 +1062,20 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> if (!max_wait_count) {
> regVal = pm8001_cr32(pm8001_ha, 0,
> MSGU_SCRATCH_PAD_1);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("TIMEOUT : ToggleVal 0x%x,"
> - "MSGU_SCRATCH_PAD1 = 0x%x\n",
> - toggleVal, regVal));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0,
> - MSGU_SCRATCH_PAD_0)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SCRATCH_PAD2 value = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0,
> - MSGU_SCRATCH_PAD_2)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0,
> - MSGU_SCRATCH_PAD_3)));
> + pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT : ToggleVal 0x%x,MSGU_SCRATCH_PAD1 = 0x%x\n",
> + toggleVal, regVal);
> + pm8001_dbg(pm8001_ha, FAIL,
> + "SCRATCH_PAD0 value = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0,
> + MSGU_SCRATCH_PAD_0));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "SCRATCH_PAD2 value = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0,
> + MSGU_SCRATCH_PAD_2));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "SCRATCH_PAD3 value = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0,
> + MSGU_SCRATCH_PAD_3));
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> return -1;
> }
> @@ -1124,22 +1090,22 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> if (check_fw_ready(pm8001_ha) == -1) {
> regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
> /* return error if MPI Configuration Table not ready */
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("FW not ready SCRATCH_PAD1"
> - " = 0x%x\n", regVal));
> + pm8001_dbg(pm8001_ha, INIT,
> + "FW not ready SCRATCH_PAD1 = 0x%x\n",
> + regVal);
> regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
> /* return error if MPI Configuration Table not ready */
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("FW not ready SCRATCH_PAD2"
> - " = 0x%x\n", regVal));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0,
> - MSGU_SCRATCH_PAD_0)));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0,
> - MSGU_SCRATCH_PAD_3)));
> + pm8001_dbg(pm8001_ha, INIT,
> + "FW not ready SCRATCH_PAD2 = 0x%x\n",
> + regVal);
> + pm8001_dbg(pm8001_ha, INIT,
> + "SCRATCH_PAD0 value = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0,
> + MSGU_SCRATCH_PAD_0));
> + pm8001_dbg(pm8001_ha, INIT,
> + "SCRATCH_PAD3 value = 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0,
> + MSGU_SCRATCH_PAD_3));
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> return -1;
> }
> @@ -1147,8 +1113,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> pm8001_bar4_shift(pm8001_ha, 0);
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
>
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SPC soft reset Complete\n"));
> + pm8001_dbg(pm8001_ha, INIT, "SPC soft reset Complete\n");
> return 0;
> }
>
> @@ -1156,8 +1121,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
> {
> u32 i;
> u32 regVal;
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("chip reset start\n"));
> + pm8001_dbg(pm8001_ha, INIT, "chip reset start\n");
>
> /* do SPC chip reset. */
> regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
> @@ -1181,8 +1145,7 @@ static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
> mdelay(1);
> } while ((--i) != 0);
>
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("chip reset finished\n"));
> + pm8001_dbg(pm8001_ha, INIT, "chip reset finished\n");
> }
>
> /**
> @@ -1365,8 +1328,7 @@ int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
> rv = pm8001_mpi_msg_free_get(circularQ, pm8001_ha->iomb_size,
> &pMessage);
> if (rv < 0) {
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("No free mpi buffer\n"));
> + pm8001_dbg(pm8001_ha, IO, "No free mpi buffer\n");
> rv = -ENOMEM;
> goto done;
> }
> @@ -1387,10 +1349,10 @@ int pm8001_mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
> /*Update the PI to the firmware*/
> pm8001_cw32(pm8001_ha, circularQ->pi_pci_bar,
> circularQ->pi_offset, circularQ->producer_idx);
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("INB Q %x OPCODE:%x , UPDATED PI=%d CI=%d\n",
> - responseQueue, opCode, circularQ->producer_idx,
> - circularQ->consumer_index));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + "INB Q %x OPCODE:%x , UPDATED PI=%d CI=%d\n",
> + responseQueue, opCode, circularQ->producer_idx,
> + circularQ->consumer_index);
> done:
> spin_unlock_irqrestore(&circularQ->iq_lock, flags);
> return rv;
> @@ -1407,17 +1369,17 @@ u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
> pOutBoundMsgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt +
> circularQ->consumer_idx * pm8001_ha->iomb_size);
> if (pOutBoundMsgHeader != msgHeader) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("consumer_idx = %d msgHeader = %p\n",
> - circularQ->consumer_idx, msgHeader));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "consumer_idx = %d msgHeader = %p\n",
> + circularQ->consumer_idx, msgHeader);
>
> /* Update the producer index from SPC */
> producer_index = pm8001_read_32(circularQ->pi_virt);
> circularQ->producer_index = cpu_to_le32(producer_index);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("consumer_idx = %d producer_index = %d"
> - "msgHeader = %p\n", circularQ->consumer_idx,
> - circularQ->producer_index, msgHeader));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "consumer_idx = %d producer_index = %dmsgHeader = %p\n",
> + circularQ->consumer_idx,
> + circularQ->producer_index, msgHeader);
> return 0;
> }
> /* free the circular queue buffer elements associated with the message*/
> @@ -1429,9 +1391,8 @@ u32 pm8001_mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha, void *pMsg,
> /* Update the producer index from SPC*/
> producer_index = pm8001_read_32(circularQ->pi_virt);
> circularQ->producer_index = cpu_to_le32(producer_index);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk(" CI=%d PI=%d\n", circularQ->consumer_idx,
> - circularQ->producer_index));
> + pm8001_dbg(pm8001_ha, IO, " CI=%d PI=%d\n",
> + circularQ->consumer_idx, circularQ->producer_index);
> return 0;
> }
>
> @@ -1461,10 +1422,10 @@ u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
> /* read header */
> header_tmp = pm8001_read_32(msgHeader);
> msgHeader_tmp = cpu_to_le32(header_tmp);
> - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
> - "outbound opcode msgheader:%x ci=%d pi=%d\n",
> - msgHeader_tmp, circularQ->consumer_idx,
> - circularQ->producer_index));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + "outbound opcode msgheader:%x ci=%d pi=%d\n",
> + msgHeader_tmp, circularQ->consumer_idx,
> + circularQ->producer_index);
> if (0 != (le32_to_cpu(msgHeader_tmp) & 0x80000000)) {
> if (OPC_OUB_SKIP_ENTRY !=
> (le32_to_cpu(msgHeader_tmp) & 0xfff)) {
> @@ -1473,12 +1434,11 @@ u32 pm8001_mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
> sizeof(struct mpi_msg_hdr);
> *pBC = (u8)((le32_to_cpu(msgHeader_tmp)
> >> 24) & 0x1f);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk(": CI=%d PI=%d "
> - "msgHeader=%x\n",
> - circularQ->consumer_idx,
> - circularQ->producer_index,
> - msgHeader_tmp));
> + pm8001_dbg(pm8001_ha, IO,
> + ": CI=%d PI=%d msgHeader=%x\n",
> + circularQ->consumer_idx,
> + circularQ->producer_index,
> + msgHeader_tmp);
> return MPI_IO_STATUS_SUCCESS;
> } else {
> circularQ->consumer_idx =
> @@ -1594,10 +1554,8 @@ void pm8001_work_fn(struct work_struct *work)
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags1);
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p"
> - " done with event 0x%x resp 0x%x stat 0x%x but"
> - " aborted by upper layer!\n",
> - t, pw->handler, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
> + t, pw->handler, ts->resp, ts->stat);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> } else {
> @@ -1617,26 +1575,16 @@ void pm8001_work_fn(struct work_struct *work)
> unsigned long flags, flags1;
> int i, ret = 0;
>
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
>
> ret = pm8001_query_task(t);
>
> - PM8001_IO_DBG(pm8001_ha,
> - switch (ret) {
> - case TMF_RESP_FUNC_SUCC:
> - pm8001_printk("...Task on lu\n");
> - break;
> -
> - case TMF_RESP_FUNC_COMPLETE:
> - pm8001_printk("...Task NOT on lu\n");
> - break;
> -
> - default:
> - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
> - "...query task failed!!!\n"));
> - break;
> - });
> + if (ret == TMF_RESP_FUNC_SUCC)
> + pm8001_dbg(pm8001_ha, IO, "...Task on lu\n");
> + else if (ret == TMF_RESP_FUNC_COMPLETE)
> + pm8001_dbg(pm8001_ha, IO, "...Task NOT on lu\n");
> + else
> + pm8001_dbg(pm8001_ha, DEVIO, "...query task failed!!!\n");
>
> spin_lock_irqsave(&pm8001_ha->lock, flags);
>
> @@ -1681,8 +1629,7 @@ void pm8001_work_fn(struct work_struct *work)
> break;
> default: /* device misbehavior */
> ret = TMF_RESP_FUNC_FAILED;
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("...Reset phy\n"));
> + pm8001_dbg(pm8001_ha, IO, "...Reset phy\n");
> pm8001_I_T_nexus_reset(dev);
> break;
> }
> @@ -1696,15 +1643,14 @@ void pm8001_work_fn(struct work_struct *work)
> default: /* device misbehavior */
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> ret = TMF_RESP_FUNC_FAILED;
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("...Reset phy\n"));
> + pm8001_dbg(pm8001_ha, IO, "...Reset phy\n");
> pm8001_I_T_nexus_reset(dev);
> }
>
> if (ret == TMF_RESP_FUNC_FAILED)
> t = NULL;
> pm8001_open_reject_retry(pm8001_ha, t, pm8001_dev);
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("...Complete\n"));
> + pm8001_dbg(pm8001_ha, IO, "...Complete\n");
> } break;
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
> dev = pm8001_dev->sas_device;
> @@ -1758,15 +1704,14 @@ static void pm8001_send_abort_all(struct pm8001_hba_info *pm8001_ha,
> int ret;
>
> if (!pm8001_ha_dev) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "dev is null\n");
> return;
> }
>
> task = sas_alloc_slow_task(GFP_ATOMIC);
>
> if (!task) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot "
> - "allocate task\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task\n");
> return;
> }
>
> @@ -1811,8 +1756,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
> task = sas_alloc_slow_task(GFP_ATOMIC);
>
> if (!task) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("cannot allocate task !!!\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task !!!\n");
> return;
> }
> task->task_done = pm8001_task_done;
> @@ -1820,8 +1764,7 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
> res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
> if (res) {
> sas_free_task(task);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("cannot allocate tag !!!\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "cannot allocate tag !!!\n");
> return;
> }
>
> @@ -1832,8 +1775,8 @@ static void pm8001_send_read_log(struct pm8001_hba_info *pm8001_ha,
> if (!dev) {
> sas_free_task(task);
> pm8001_tag_free(pm8001_ha, ccb_tag);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Domain device cannot be allocated\n"));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Domain device cannot be allocated\n");
> return;
> }
> task->dev = dev;
> @@ -1910,27 +1853,25 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t = ccb->task;
>
> if (status && status != IO_UNDERFLOW)
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("sas IO status 0x%x\n", status));
> + pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", status);
> if (unlikely(!t || !t->lldd_task || !t->dev))
> return;
> ts = &t->task_status;
> /* Print sas address of IO failed device */
> if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
> (status != IO_UNDERFLOW))
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SAS Address of IO Failure Drive:"
> - "%016llx", SAS_ADDR(t->dev->sas_addr)));
> + pm8001_dbg(pm8001_ha, FAIL, "SAS Address of IO Failure Drive:%016llx\n",
> + SAS_ADDR(t->dev->sas_addr));
>
> if (status)
> - PM8001_IOERR_DBG(pm8001_ha, pm8001_printk(
> - "status:0x%x, tag:0x%x, task:0x%p\n",
> - status, tag, t));
> + pm8001_dbg(pm8001_ha, IOERR,
> + "status:0x%x, tag:0x%x, task:0x%p\n",
> + status, tag, t);
>
> switch (status) {
> case IO_SUCCESS:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS"
> - ",param = %d\n", param));
> + pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS,param = %d\n",
> + param);
> if (param == 0) {
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_GOOD;
> @@ -1945,15 +1886,14 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_ABORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_ABORTED IOMB Tag\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_ABORTED_TASK;
> break;
> case IO_UNDERFLOW:
> /* SSP Completion with error */
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW"
> - ",param = %d\n", param));
> + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW,param = %d\n",
> + param);
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_UNDERRUN;
> ts->residual = param;
> @@ -1961,50 +1901,45 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_NO_DEVICE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_NO_DEVICE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_PHY_DOWN;
> break;
> case IO_XFER_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> /* Force the midlayer to retry */
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_XFER_ERROR_PHY_NOT_READY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_EPROTO;
> break;
> case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> break;
> case IO_OPEN_CNX_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> @@ -2014,68 +1949,59 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
> break;
> case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_BAD_DEST;
> break;
> case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
> - "NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_CONN_RATE;
> break;
> case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
> break;
> case IO_XFER_ERROR_NAK_RECEIVED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> break;
> case IO_XFER_ERROR_DMA:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_DMA\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> break;
> case IO_XFER_OPEN_RETRY_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_XFER_ERROR_OFFSET_MISMATCH:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> break;
> case IO_PORT_IN_RESET:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_PORT_IN_RESET\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> break;
> case IO_DS_NON_OPERATIONAL:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> if (!t->uldd_task)
> @@ -2084,51 +2010,44 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> IO_DS_NON_OPERATIONAL);
> break;
> case IO_DS_IN_RECOVERY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_IN_RECOVERY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> break;
> case IO_TM_TAG_NOT_FOUND:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_TM_TAG_NOT_FOUND\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> break;
> case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_SSP_EXT_IU_ZERO_LEN_ERROR\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> break;
> case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown status 0x%x\n", status));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
> /* not allowed case. Therefore, return failed status */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> break;
> }
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("scsi_status = %x\n ",
> - psspPayload->ssp_resp_iu.status));
> + pm8001_dbg(pm8001_ha, IO, "scsi_status = %x\n",
> + psspPayload->ssp_resp_iu.status);
> spin_lock_irqsave(&t->task_state_lock, flags);
> t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
> t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
> - " io_status 0x%x resp 0x%x "
> - "stat 0x%x but aborted by upper layer!\n",
> - t, status, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
> + t, status, ts->resp, ts->stat);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> } else {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> @@ -2157,17 +2076,15 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t = ccb->task;
> pm8001_dev = ccb->device;
> if (event)
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("sas IO status 0x%x\n", event));
> + pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", event);
> if (unlikely(!t || !t->lldd_task || !t->dev))
> return;
> ts = &t->task_status;
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("port_id = %x,device_id = %x\n",
> - port_id, dev_id));
> + pm8001_dbg(pm8001_ha, DEVIO, "port_id = %x,device_id = %x\n",
> + port_id, dev_id);
> switch (event) {
> case IO_OVERFLOW:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
> + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> ts->residual = 0;
> @@ -2175,42 +2092,36 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
> pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
> return;
> case IO_XFER_ERROR_PHY_NOT_READY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
> - "_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_EPROTO;
> break;
> case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> break;
> case IO_OPEN_CNX_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> @@ -2220,88 +2131,78 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
> break;
> case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_BAD_DEST;
> break;
> case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
> - "NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_CONN_RATE;
> break;
> case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
> break;
> case IO_XFER_ERROR_NAK_RECEIVED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> break;
> case IO_XFER_OPEN_RETRY_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
> pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
> return;
> case IO_XFER_ERROR_UNEXPECTED_PHASE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_XFER_RDY_OVERRUN:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_OFFSET_MISMATCH:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_CMD_FRAME_ISSUED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk(" IO_XFER_CMD_FRAME_ISSUED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
> return;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown status 0x%x\n", event));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event);
> /* not allowed case. Therefore, return failed status */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> @@ -2313,10 +2214,8 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
> - " event 0x%x resp 0x%x "
> - "stat 0x%x but aborted by upper layer!\n",
> - t, event, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
> + t, event, ts->resp, ts->stat);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> } else {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> @@ -2352,8 +2251,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> tag = le32_to_cpu(psataPayload->tag);
>
> if (!tag) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("tag null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "tag null\n");
> return;
> }
> ccb = &pm8001_ha->ccb_info[tag];
> @@ -2362,8 +2260,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> t = ccb->task;
> pm8001_dev = ccb->device;
> } else {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("ccb null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "ccb null\n");
> return;
> }
>
> @@ -2371,29 +2268,26 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> if (t->dev && (t->dev->lldd_dev))
> pm8001_dev = t->dev->lldd_dev;
> } else {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "task null\n");
> return;
> }
>
> if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
> && unlikely(!t || !t->lldd_task || !t->dev)) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task or dev null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
> return;
> }
>
> ts = &t->task_status;
> if (!ts) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("ts null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "ts null\n");
> return;
> }
>
> if (status)
> - PM8001_IOERR_DBG(pm8001_ha, pm8001_printk(
> - "status:0x%x, tag:0x%x, task::0x%p\n",
> - status, tag, t));
> + pm8001_dbg(pm8001_ha, IOERR,
> + "status:0x%x, tag:0x%x, task::0x%p\n",
> + status, tag, t);
>
> /* Print sas address of IO failed device */
> if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
> @@ -2425,19 +2319,19 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> & 0xff000000)) +
> pm8001_dev->attached_phy +
> 0x10);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SAS Address of IO Failure Drive:"
> - "%08x%08x", temp_sata_addr_hi,
> - temp_sata_addr_low));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "SAS Address of IO Failure Drive:%08x%08x\n",
> + temp_sata_addr_hi,
> + temp_sata_addr_low);
> } else {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SAS Address of IO Failure Drive:"
> - "%016llx", SAS_ADDR(t->dev->sas_addr)));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "SAS Address of IO Failure Drive:%016llx\n",
> + SAS_ADDR(t->dev->sas_addr));
> }
> }
> switch (status) {
> case IO_SUCCESS:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
> if (param == 0) {
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_GOOD;
> @@ -2459,39 +2353,38 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_PROTO_RESPONSE;
> ts->residual = param;
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
> - param));
> + pm8001_dbg(pm8001_ha, IO,
> + "SAS_PROTO_RESPONSE len = %d\n",
> + param);
> sata_resp = &psataPayload->sata_resp[0];
> resp = (struct ata_task_resp *)ts->buf;
> if (t->ata_task.dma_xfer == 0 &&
> t->data_dir == DMA_FROM_DEVICE) {
> len = sizeof(struct pio_setup_fis);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("PIO read len = %d\n", len));
> + pm8001_dbg(pm8001_ha, IO,
> + "PIO read len = %d\n", len);
> } else if (t->ata_task.use_ncq) {
> len = sizeof(struct set_dev_bits_fis);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("FPDMA len = %d\n", len));
> + pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
> + len);
> } else {
> len = sizeof(struct dev_to_host_fis);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("other len = %d\n", len));
> + pm8001_dbg(pm8001_ha, IO, "other len = %d\n",
> + len);
> }
> if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
> resp->frame_len = len;
> memcpy(&resp->ending_fis[0], sata_resp, len);
> ts->buf_valid_size = sizeof(*resp);
> } else
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("response to large\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "response too large\n");
> }
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_ABORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_ABORTED IOMB Tag\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_ABORTED_TASK;
> if (pm8001_dev)
> @@ -2500,8 +2393,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> /* following cases are to do cases */
> case IO_UNDERFLOW:
> /* SATA Completion with error */
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_UNDERFLOW param = %d\n", param));
> + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW param = %d\n", param);
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_UNDERRUN;
> ts->residual = param;
> @@ -2509,24 +2401,21 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_NO_DEVICE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_NO_DEVICE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_PHY_DOWN;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_INTERRUPTED;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_PHY_NOT_READY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2534,9 +2423,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
> - "_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_EPROTO;
> @@ -2544,8 +2431,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> @@ -2553,8 +2440,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
> @@ -2562,8 +2448,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (!t->uldd_task) {
> @@ -2577,8 +2462,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_BAD_DEST;
> @@ -2593,9 +2478,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
> - "NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_CONN_RATE;
> @@ -2603,9 +2486,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_STP_RESOURCES"
> - "_BUSY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (!t->uldd_task) {
> @@ -2619,8 +2500,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
> @@ -2628,64 +2509,56 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_NAK_RECEIVED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_DMA:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_DMA\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_ABORTED_TASK;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_SATA_LINK_TIMEOUT\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_REJECTED_NCQ_MODE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_UNDERRUN;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_OPEN_RETRY_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_PORT_IN_RESET:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_PORT_IN_RESET\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_DS_NON_OPERATIONAL:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (!t->uldd_task) {
> @@ -2698,16 +2571,14 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case IO_DS_IN_RECOVERY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk(" IO_DS_IN_RECOVERY\n"));
> + pm8001_dbg(pm8001_ha, IO, " IO_DS_IN_RECOVERY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_DS_IN_ERROR:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_IN_ERROR\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_ERROR\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (!t->uldd_task) {
> @@ -2720,8 +2591,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2729,8 +2600,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown status 0x%x\n", status));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
> /* not allowed case. Therefore, return failed status */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> @@ -2744,10 +2614,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task 0x%p done with io_status 0x%x"
> - " resp 0x%x stat 0x%x but aborted by upper layer!\n",
> - t, status, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
> + t, status, ts->resp, ts->stat);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> } else {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> @@ -2776,12 +2645,10 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t = ccb->task;
> pm8001_dev = ccb->device;
> } else {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("No CCB !!!. returning\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "No CCB !!!. returning\n");
> }
> if (event)
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SATA EVENT 0x%x\n", event));
> + pm8001_dbg(pm8001_ha, FAIL, "SATA EVENT 0x%x\n", event);
>
> /* Check if this is NCQ error */
> if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
> @@ -2797,17 +2664,16 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t = ccb->task;
> pm8001_dev = ccb->device;
> if (event)
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("sata IO status 0x%x\n", event));
> + pm8001_dbg(pm8001_ha, FAIL, "sata IO status 0x%x\n", event);
> if (unlikely(!t || !t->lldd_task || !t->dev))
> return;
> ts = &t->task_status;
> - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
> - "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n",
> - port_id, dev_id, tag, event));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + "port_id:0x%x, device_id:0x%x, tag:0x%x, event:0x%x\n",
> + port_id, dev_id, tag, event);
> switch (event) {
> case IO_OVERFLOW:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> ts->residual = 0;
> @@ -2815,43 +2681,37 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_INTERRUPTED;
> break;
> case IO_XFER_ERROR_PHY_NOT_READY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
> - "_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_EPROTO;
> break;
> case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> break;
> case IO_OPEN_CNX_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
> break;
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (!t->uldd_task) {
> @@ -2865,94 +2725,82 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> }
> break;
> case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_BAD_DEST;
> break;
> case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
> - "NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_CONN_RATE;
> break;
> case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
> break;
> case IO_XFER_ERROR_NAK_RECEIVED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> break;
> case IO_XFER_ERROR_PEER_ABORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PEER_ABORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> break;
> case IO_XFER_ERROR_REJECTED_NCQ_MODE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_UNDERRUN;
> break;
> case IO_XFER_OPEN_RETRY_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_UNEXPECTED_PHASE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_XFER_RDY_OVERRUN:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_OFFSET_MISMATCH:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_CMD_FRAME_ISSUED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
> break;
> case IO_XFER_PIO_SETUP_ERROR:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_PIO_SETUP_ERROR\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown status 0x%x\n", event));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event);
> /* not allowed case. Therefore, return failed status */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> @@ -2964,10 +2812,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task 0x%p done with io_status 0x%x"
> - " resp 0x%x stat 0x%x but aborted by upper layer!\n",
> - t, event, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
> + t, event, ts->resp, ts->stat);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> } else {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> @@ -2997,33 +2844,31 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> ts = &t->task_status;
> pm8001_dev = ccb->device;
> if (status) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("smp IO status 0x%x\n", status));
> - PM8001_IOERR_DBG(pm8001_ha,
> - pm8001_printk("status:0x%x, tag:0x%x, task:0x%p\n",
> - status, tag, t));
> + pm8001_dbg(pm8001_ha, FAIL, "smp IO status 0x%x\n", status);
> + pm8001_dbg(pm8001_ha, IOERR,
> + "status:0x%x, tag:0x%x, task:0x%p\n",
> + status, tag, t);
> }
> if (unlikely(!t || !t->lldd_task || !t->dev))
> return;
>
> switch (status) {
> case IO_SUCCESS:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_GOOD;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_ABORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_ABORTED IOMB\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_ABORTED_TASK;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OVERFLOW:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> ts->residual = 0;
> @@ -3031,52 +2876,47 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_NO_DEVICE:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_PHY_DOWN;
> break;
> case IO_ERROR_HW_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_BUSY;
> break;
> case IO_XFER_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_BUSY;
> break;
> case IO_XFER_ERROR_PHY_NOT_READY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_BUSY;
> break;
> case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> break;
> case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> break;
> case IO_OPEN_CNX_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
> break;
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> @@ -3085,76 +2925,67 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
> break;
> case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_BAD_DEST;
> break;
> case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
> - "NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_CONN_RATE;
> break;
> case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
> break;
> case IO_XFER_ERROR_RX_FRAME:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_RX_FRAME\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> break;
> case IO_XFER_OPEN_RETRY_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_ERROR_INTERNAL_SMP_RESOURCE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_ERROR_INTERNAL_SMP_RESOURCE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_QUEUE_FULL;
> break;
> case IO_PORT_IN_RESET:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_PORT_IN_RESET\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_DS_NON_OPERATIONAL:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> break;
> case IO_DS_IN_RECOVERY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_IN_RECOVERY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown status 0x%x\n", status));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> /* not allowed case. Therefore, return failed status */
> @@ -3166,10 +2997,8 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
> - " io_status 0x%x resp 0x%x "
> - "stat 0x%x but aborted by upper layer!\n",
> - t, status, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL, "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
> + t, status, ts->resp, ts->stat);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> } else {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> @@ -3191,9 +3020,8 @@ void pm8001_mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha,
> u32 device_id = le32_to_cpu(pPayload->device_id);
> u8 pds = le32_to_cpu(pPayload->pds_nds) & PDS_BITS;
> u8 nds = le32_to_cpu(pPayload->pds_nds) & NDS_BITS;
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set device id = 0x%x state "
> - "from 0x%x to 0x%x status = 0x%x!\n",
> - device_id, pds, nds, status));
> + pm8001_dbg(pm8001_ha, MSG, "Set device id = 0x%x state from 0x%x to 0x%x status = 0x%x!\n",
> + device_id, pds, nds, status);
> complete(pm8001_dev->setds_completion);
> ccb->task = NULL;
> ccb->ccb_tag = 0xFFFFFFFF;
> @@ -3208,10 +3036,9 @@ void pm8001_mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
> u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
> complete(pm8001_ha->nvmd_completion);
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n"));
> + pm8001_dbg(pm8001_ha, MSG, "Set nvm data complete!\n");
> if ((dlen_status & NVMD_STAT) != 0) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Set nvm data error!\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Set nvm data error!\n");
> return;
> }
> ccb->task = NULL;
> @@ -3233,26 +3060,22 @@ pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> void *virt_addr = pm8001_ha->memoryMap.region[NVMD].virt_ptr;
> fw_control_context = ccb->fw_control_context;
>
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Get nvm data complete!\n"));
> + pm8001_dbg(pm8001_ha, MSG, "Get nvm data complete!\n");
> if ((dlen_status & NVMD_STAT) != 0) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Get nvm data error!\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Get nvm data error!\n");
> complete(pm8001_ha->nvmd_completion);
> return;
> }
>
> if (ir_tds_bn_dps_das_nvm & IPMode) {
> /* indirect mode - IR bit set */
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("Get NVMD success, IR=1\n"));
> + pm8001_dbg(pm8001_ha, MSG, "Get NVMD success, IR=1\n");
> if ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == TWI_DEVICE) {
> if (ir_tds_bn_dps_das_nvm == 0x80a80200) {
> memcpy(pm8001_ha->sas_addr,
> ((u8 *)virt_addr + 4),
> SAS_ADDR_SIZE);
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("Get SAS address"
> - " from VPD successfully!\n"));
> + pm8001_dbg(pm8001_ha, MSG, "Get SAS address from VPD successfully!\n");
> }
> } else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == C_SEEPROM)
> || ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == VPD_FLASH) ||
> @@ -3263,14 +3086,14 @@ pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> ;
> } else {
> /* Should not be happened*/
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("(IR=1)Wrong Device type 0x%x\n",
> - ir_tds_bn_dps_das_nvm));
> + pm8001_dbg(pm8001_ha, MSG,
> + "(IR=1)Wrong Device type 0x%x\n",
> + ir_tds_bn_dps_das_nvm);
> }
> } else /* direct mode */{
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("Get NVMD success, IR=0, dataLen=%d\n",
> - (dlen_status & NVMD_LEN) >> 24));
> + pm8001_dbg(pm8001_ha, MSG,
> + "Get NVMD success, IR=0, dataLen=%d\n",
> + (dlen_status & NVMD_LEN) >> 24);
> }
> /* Though fw_control_context is freed below, usrAddr still needs
> * to be updated as this holds the response to the request function
> @@ -3284,7 +3107,7 @@ pm8001_mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> * fw_control_context->usrAddr
> */
> complete(pm8001_ha->nvmd_completion);
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n"));
> + pm8001_dbg(pm8001_ha, MSG, "Set nvm data complete!\n");
> ccb->task = NULL;
> ccb->ccb_tag = 0xFFFFFFFF;
> pm8001_tag_free(pm8001_ha, tag);
> @@ -3300,13 +3123,13 @@ int pm8001_mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
> u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
> tag = le32_to_cpu(pPayload->tag);
> if (status != 0) {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("%x phy execute %x phy op failed!\n",
> - phy_id, phy_op));
> + pm8001_dbg(pm8001_ha, MSG,
> + "%x phy execute %x phy op failed!\n",
> + phy_id, phy_op);
> } else {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("%x phy execute %x phy op success!\n",
> - phy_id, phy_op));
> + pm8001_dbg(pm8001_ha, MSG,
> + "%x phy execute %x phy op success!\n",
> + phy_id, phy_op);
> pm8001_ha->phy[phy_id].reset_success = true;
> }
> if (pm8001_ha->phy[phy_id].enable_completion) {
> @@ -3353,7 +3176,7 @@ void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
> } else if (phy->phy_type & PORT_TYPE_SATA) {
> /*Nothing*/
> }
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("phy %d byte dmaded.\n", i));
> + pm8001_dbg(pm8001_ha, MSG, "phy %d byte dmaded.\n", i);
>
> sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
> pm8001_ha->sas->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
> @@ -3476,37 +3299,34 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
> u8 deviceType = pPayload->sas_identify.dev_type;
> port->port_state = portstate;
> phy->phy_state = PHY_STATE_LINK_UP_SPC;
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
> - port_id, phy_id));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_SAS_PHY_UP port id = %d, phy id = %d\n",
> + port_id, phy_id);
>
> switch (deviceType) {
> case SAS_PHY_UNUSED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("device type no device.\n"));
> + pm8001_dbg(pm8001_ha, MSG, "device type no device.\n");
> break;
> case SAS_END_DEVICE:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
> + pm8001_dbg(pm8001_ha, MSG, "end device.\n");
> pm8001_chip_phy_ctl_req(pm8001_ha, phy_id,
> PHY_NOTIFY_ENABLE_SPINUP);
> port->port_attached = 1;
> pm8001_get_lrate_mode(phy, link_rate);
> break;
> case SAS_EDGE_EXPANDER_DEVICE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("expander device.\n"));
> + pm8001_dbg(pm8001_ha, MSG, "expander device.\n");
> port->port_attached = 1;
> pm8001_get_lrate_mode(phy, link_rate);
> break;
> case SAS_FANOUT_EXPANDER_DEVICE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("fanout expander device.\n"));
> + pm8001_dbg(pm8001_ha, MSG, "fanout expander device.\n");
> port->port_attached = 1;
> pm8001_get_lrate_mode(phy, link_rate);
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("unknown device type(%x)\n", deviceType));
> + pm8001_dbg(pm8001_ha, DEVIO, "unknown device type(%x)\n",
> + deviceType);
> break;
> }
> phy->phy_type |= PORT_TYPE_SAS;
> @@ -3552,9 +3372,8 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
> struct sas_ha_struct *sas_ha = pm8001_ha->sas;
> struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
> unsigned long flags;
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_SATA_PHY_UP port id = %d,"
> - " phy id = %d\n", port_id, phy_id));
> + pm8001_dbg(pm8001_ha, DEVIO, "HW_EVENT_SATA_PHY_UP port id = %d, phy id = %d\n",
> + port_id, phy_id);
> port->port_state = portstate;
> phy->phy_state = PHY_STATE_LINK_UP_SPC;
> port->port_attached = 1;
> @@ -3602,37 +3421,35 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
> case PORT_VALID:
> break;
> case PORT_INVALID:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" PortInvalid portID %d\n", port_id));
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" Last phy Down and port invalid\n"));
> + pm8001_dbg(pm8001_ha, MSG, " PortInvalid portID %d\n",
> + port_id);
> + pm8001_dbg(pm8001_ha, MSG,
> + " Last phy Down and port invalid\n");
> port->port_attached = 0;
> pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
> port_id, phy_id, 0, 0);
> break;
> case PORT_IN_RESET:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" Port In Reset portID %d\n", port_id));
> + pm8001_dbg(pm8001_ha, MSG, " Port In Reset portID %d\n",
> + port_id);
> break;
> case PORT_NOT_ESTABLISHED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + " phy Down and PORT_NOT_ESTABLISHED\n");
> port->port_attached = 0;
> break;
> case PORT_LOSTCOMM:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" Last phy Down and port invalid\n"));
> + pm8001_dbg(pm8001_ha, MSG, " phy Down and PORT_LOSTCOMM\n");
> + pm8001_dbg(pm8001_ha, MSG,
> + " Last phy Down and port invalid\n");
> port->port_attached = 0;
> pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
> port_id, phy_id, 0, 0);
> break;
> default:
> port->port_attached = 0;
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk(" phy Down and(default) = %x\n",
> - portstate));
> + pm8001_dbg(pm8001_ha, DEVIO, " phy Down and(default) = %x\n",
> + portstate);
> break;
>
> }
> @@ -3663,44 +3480,42 @@ int pm8001_mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> pm8001_dev = ccb->device;
> status = le32_to_cpu(registerRespPayload->status);
> device_id = le32_to_cpu(registerRespPayload->device_id);
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" register device is status = %d\n", status));
> + pm8001_dbg(pm8001_ha, MSG, " register device is status = %d\n",
> + status);
> switch (status) {
> case DEVREG_SUCCESS:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("DEVREG_SUCCESS\n"));
> + pm8001_dbg(pm8001_ha, MSG, "DEVREG_SUCCESS\n");
> pm8001_dev->device_id = device_id;
> break;
> case DEVREG_FAILURE_OUT_OF_RESOURCE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("DEVREG_FAILURE_OUT_OF_RESOURCE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "DEVREG_FAILURE_OUT_OF_RESOURCE\n");
> break;
> case DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n");
> break;
> case DEVREG_FAILURE_INVALID_PHY_ID:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("DEVREG_FAILURE_INVALID_PHY_ID\n"));
> + pm8001_dbg(pm8001_ha, MSG, "DEVREG_FAILURE_INVALID_PHY_ID\n");
> break;
> case DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n");
> break;
> case DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n");
> break;
> case DEVREG_FAILURE_PORT_NOT_VALID_STATE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("DEVREG_FAILURE_PORT_NOT_VALID_STATE\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "DEVREG_FAILURE_PORT_NOT_VALID_STATE\n");
> break;
> case DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n");
> break;
> default:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "DEVREG_FAILURE_DEVICE_TYPE_NOT_SUPPORTED\n");
> break;
> }
> complete(pm8001_dev->dcompletion);
> @@ -3720,9 +3535,9 @@ int pm8001_mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> status = le32_to_cpu(registerRespPayload->status);
> device_id = le32_to_cpu(registerRespPayload->device_id);
> if (status != 0)
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" deregister device failed ,status = %x"
> - ", device_id = %x\n", status, device_id));
> + pm8001_dbg(pm8001_ha, MSG,
> + " deregister device failed ,status = %x, device_id = %x\n",
> + status, device_id);
> return 0;
> }
>
> @@ -3742,44 +3557,37 @@ int pm8001_mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha,
> status = le32_to_cpu(ppayload->status);
> switch (status) {
> case FLASH_UPDATE_COMPLETE_PENDING_REBOOT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + ": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n");
> break;
> case FLASH_UPDATE_IN_PROGRESS:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(": FLASH_UPDATE_IN_PROGRESS\n"));
> + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_IN_PROGRESS\n");
> break;
> case FLASH_UPDATE_HDR_ERR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(": FLASH_UPDATE_HDR_ERR\n"));
> + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_HDR_ERR\n");
> break;
> case FLASH_UPDATE_OFFSET_ERR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(": FLASH_UPDATE_OFFSET_ERR\n"));
> + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_OFFSET_ERR\n");
> break;
> case FLASH_UPDATE_CRC_ERR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(": FLASH_UPDATE_CRC_ERR\n"));
> + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_CRC_ERR\n");
> break;
> case FLASH_UPDATE_LENGTH_ERR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(": FLASH_UPDATE_LENGTH_ERR\n"));
> + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_LENGTH_ERR\n");
> break;
> case FLASH_UPDATE_HW_ERR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(": FLASH_UPDATE_HW_ERR\n"));
> + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_HW_ERR\n");
> break;
> case FLASH_UPDATE_DNLD_NOT_SUPPORTED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + ": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n");
> break;
> case FLASH_UPDATE_DISABLED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(": FLASH_UPDATE_DISABLED\n"));
> + pm8001_dbg(pm8001_ha, MSG, ": FLASH_UPDATE_DISABLED\n");
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("No matched status = %d\n", status));
> + pm8001_dbg(pm8001_ha, DEVIO, "No matched status = %d\n",
> + status);
> break;
> }
> kfree(ccb->fw_control_context);
> @@ -3797,12 +3605,11 @@ int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> struct general_event_resp *pPayload =
> (struct general_event_resp *)(piomb + 4);
> status = le32_to_cpu(pPayload->status);
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" status = 0x%x\n", status));
> + pm8001_dbg(pm8001_ha, MSG, " status = 0x%x\n", status);
> for (i = 0; i < GENERAL_EVENT_PAYLOAD; i++)
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("inb_IOMB_payload[0x%x] 0x%x,\n", i,
> - pPayload->inb_IOMB_payload[i]));
> + pm8001_dbg(pm8001_ha, MSG, "inb_IOMB_payload[0x%x] 0x%x,\n",
> + i,
> + pPayload->inb_IOMB_payload[i]);
> return 0;
> }
>
> @@ -3822,8 +3629,7 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> status = le32_to_cpu(pPayload->status);
> tag = le32_to_cpu(pPayload->tag);
> if (!tag) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk(" TAG NULL. RETURNING !!!"));
> + pm8001_dbg(pm8001_ha, FAIL, " TAG NULL. RETURNING !!!\n");
> return -1;
> }
>
> @@ -3833,23 +3639,21 @@ int pm8001_mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> pm8001_dev = ccb->device; /* retrieve device */
>
> if (!t) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk(" TASK NULL. RETURNING !!!"));
> + pm8001_dbg(pm8001_ha, FAIL, " TASK NULL. RETURNING !!!\n");
> return -1;
> }
> ts = &t->task_status;
> if (status != 0)
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task abort failed status 0x%x ,"
> - "tag = 0x%x, scp= 0x%x\n", status, tag, scp));
> + pm8001_dbg(pm8001_ha, FAIL, "task abort failed status 0x%x ,tag = 0x%x, scp= 0x%x\n",
> + status, tag, scp);
> switch (status) {
> case IO_SUCCESS:
> - PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
> + pm8001_dbg(pm8001_ha, EH, "IO_SUCCESS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_GOOD;
> break;
> case IO_NOT_VALID:
> - PM8001_EH_DBG(pm8001_ha, pm8001_printk("IO_NOT_VALID\n"));
> + pm8001_dbg(pm8001_ha, EH, "IO_NOT_VALID\n");
> ts->resp = TMF_RESP_FUNC_FAILED;
> break;
> }
> @@ -3894,14 +3698,13 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
> struct sas_ha_struct *sas_ha = pm8001_ha->sas;
> struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
> struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
> - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
> - "SPC HW event for portid:%d, phyid:%d, event:%x, status:%x\n",
> - port_id, phy_id, eventType, status));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + "SPC HW event for portid:%d, phyid:%d, event:%x, status:%x\n",
> + port_id, phy_id, eventType, status);
> switch (eventType) {
> case HW_EVENT_PHY_START_STATUS:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PHY_START_STATUS"
> - " status = %x\n", status));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS status = %x\n",
> + status);
> if (status == 0) {
> phy->phy_state = 1;
> if (pm8001_ha->flags == PM8001F_RUN_TIME &&
> @@ -3910,38 +3713,32 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
> }
> break;
> case HW_EVENT_SAS_PHY_UP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PHY_START_STATUS\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS\n");
> hw_event_sas_phy_up(pm8001_ha, piomb);
> break;
> case HW_EVENT_SATA_PHY_UP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_SATA_PHY_UP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_PHY_UP\n");
> hw_event_sata_phy_up(pm8001_ha, piomb);
> break;
> case HW_EVENT_PHY_STOP_STATUS:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PHY_STOP_STATUS "
> - "status = %x\n", status));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_STOP_STATUS status = %x\n",
> + status);
> if (status == 0)
> phy->phy_state = 0;
> break;
> case HW_EVENT_SATA_SPINUP_HOLD:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_SPINUP_HOLD\n");
> sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
> break;
> case HW_EVENT_PHY_DOWN:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PHY_DOWN\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_DOWN\n");
> sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
> phy->phy_attached = 0;
> phy->phy_state = 0;
> hw_event_phy_down(pm8001_ha, piomb);
> break;
> case HW_EVENT_PORT_INVALID:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PORT_INVALID\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_INVALID\n");
> sas_phy_disconnected(sas_phy);
> phy->phy_attached = 0;
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> @@ -3949,8 +3746,7 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
> /* the broadcast change primitive received, tell the LIBSAS this event
> to revalidate the sas domain*/
> case HW_EVENT_BROADCAST_CHANGE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_CHANGE\n");
> pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
> port_id, phy_id, 1, 0);
> spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
> @@ -3959,23 +3755,21 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
> sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
> break;
> case HW_EVENT_PHY_ERROR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PHY_ERROR\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_ERROR\n");
> sas_phy_disconnected(&phy->sas_phy);
> phy->phy_attached = 0;
> sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
> break;
> case HW_EVENT_BROADCAST_EXP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_EXP\n");
> spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
> sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
> spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
> sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
> break;
> case HW_EVENT_LINK_ERR_INVALID_DWORD:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_LINK_ERR_INVALID_DWORD\n");
> pm8001_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
> sas_phy_disconnected(sas_phy);
> @@ -3983,8 +3777,8 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> break;
> case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_LINK_ERR_DISPARITY_ERROR\n");
> pm8001_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_LINK_ERR_DISPARITY_ERROR,
> port_id, phy_id, 0, 0);
> @@ -3993,8 +3787,8 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> break;
> case HW_EVENT_LINK_ERR_CODE_VIOLATION:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_LINK_ERR_CODE_VIOLATION\n");
> pm8001_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_LINK_ERR_CODE_VIOLATION,
> port_id, phy_id, 0, 0);
> @@ -4003,8 +3797,8 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> break;
> case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n");
> pm8001_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
> port_id, phy_id, 0, 0);
> @@ -4013,39 +3807,34 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> break;
> case HW_EVENT_MALFUNCTION:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_MALFUNCTION\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_MALFUNCTION\n");
> break;
> case HW_EVENT_BROADCAST_SES:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_SES\n");
> spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
> sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
> spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
> sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
> break;
> case HW_EVENT_INBOUND_CRC_ERROR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_INBOUND_CRC_ERROR\n");
> pm8001_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_INBOUND_CRC_ERROR,
> port_id, phy_id, 0, 0);
> break;
> case HW_EVENT_HARD_RESET_RECEIVED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_HARD_RESET_RECEIVED\n");
> sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
> break;
> case HW_EVENT_ID_FRAME_TIMEOUT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_ID_FRAME_TIMEOUT\n");
> sas_phy_disconnected(sas_phy);
> phy->phy_attached = 0;
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> break;
> case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n");
> pm8001_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
> port_id, phy_id, 0, 0);
> @@ -4054,34 +3843,30 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> break;
> case HW_EVENT_PORT_RESET_TIMER_TMO:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_TIMER_TMO\n");
> sas_phy_disconnected(sas_phy);
> phy->phy_attached = 0;
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> break;
> case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_PORT_RECOVERY_TIMER_TMO\n");
> sas_phy_disconnected(sas_phy);
> phy->phy_attached = 0;
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> break;
> case HW_EVENT_PORT_RECOVER:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RECOVER\n");
> break;
> case HW_EVENT_PORT_RESET_COMPLETE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_COMPLETE\n");
> break;
> case EVENT_BROADCAST_ASYNCH_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "EVENT_BROADCAST_ASYNCH_EVENT\n");
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown event type = %x\n", eventType));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown event type = %x\n",
> + eventType);
> break;
> }
> return 0;
> @@ -4097,163 +3882,132 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
> __le32 pHeader = *(__le32 *)piomb;
> u8 opc = (u8)((le32_to_cpu(pHeader)) & 0xFFF);
>
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("process_one_iomb:"));
> + pm8001_dbg(pm8001_ha, MSG, "process_one_iomb:\n");
>
> switch (opc) {
> case OPC_OUB_ECHO:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_ECHO\n");
> break;
> case OPC_OUB_HW_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_HW_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_HW_EVENT\n");
> mpi_hw_event(pm8001_ha, piomb);
> break;
> case OPC_OUB_SSP_COMP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SSP_COMP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_COMP\n");
> mpi_ssp_completion(pm8001_ha, piomb);
> break;
> case OPC_OUB_SMP_COMP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SMP_COMP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_COMP\n");
> mpi_smp_completion(pm8001_ha, piomb);
> break;
> case OPC_OUB_LOCAL_PHY_CNTRL:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_LOCAL_PHY_CNTRL\n");
> pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
> break;
> case OPC_OUB_DEV_REGIST:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_DEV_REGIST\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_REGIST\n");
> pm8001_mpi_reg_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_DEREG_DEV:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("unregister the device\n"));
> + pm8001_dbg(pm8001_ha, MSG, "unregister the device\n");
> pm8001_mpi_dereg_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_GET_DEV_HANDLE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEV_HANDLE\n");
> break;
> case OPC_OUB_SATA_COMP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SATA_COMP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_COMP\n");
> mpi_sata_completion(pm8001_ha, piomb);
> break;
> case OPC_OUB_SATA_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SATA_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_EVENT\n");
> mpi_sata_event(pm8001_ha, piomb);
> break;
> case OPC_OUB_SSP_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SSP_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_EVENT\n");
> mpi_ssp_event(pm8001_ha, piomb);
> break;
> case OPC_OUB_DEV_HANDLE_ARRIV:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_HANDLE_ARRIV\n");
> /*This is for target*/
> break;
> case OPC_OUB_SSP_RECV_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_RECV_EVENT\n");
> /*This is for target*/
> break;
> case OPC_OUB_DEV_INFO:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_DEV_INFO\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_INFO\n");
> break;
> case OPC_OUB_FW_FLASH_UPDATE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_FW_FLASH_UPDATE\n");
> pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_GPIO_RESPONSE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_RESPONSE\n");
> break;
> case OPC_OUB_GPIO_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_EVENT\n");
> break;
> case OPC_OUB_GENERAL_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GENERAL_EVENT\n");
> pm8001_mpi_general_event(pm8001_ha, piomb);
> break;
> case OPC_OUB_SSP_ABORT_RSP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_ABORT_RSP\n");
> pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_SATA_ABORT_RSP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_ABORT_RSP\n");
> pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_SAS_DIAG_MODE_START_END:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_SAS_DIAG_MODE_START_END\n");
> break;
> case OPC_OUB_SAS_DIAG_EXECUTE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_DIAG_EXECUTE\n");
> break;
> case OPC_OUB_GET_TIME_STAMP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_TIME_STAMP\n");
> break;
> case OPC_OUB_SAS_HW_EVENT_ACK:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_HW_EVENT_ACK\n");
> break;
> case OPC_OUB_PORT_CONTROL:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_PORT_CONTROL\n");
> break;
> case OPC_OUB_SMP_ABORT_RSP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_ABORT_RSP\n");
> pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_GET_NVMD_DATA:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_NVMD_DATA\n");
> pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_SET_NVMD_DATA:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_NVMD_DATA\n");
> pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_DEVICE_HANDLE_REMOVAL:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEVICE_HANDLE_REMOVAL\n");
> break;
> case OPC_OUB_SET_DEVICE_STATE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEVICE_STATE\n");
> pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_GET_DEVICE_STATE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEVICE_STATE\n");
> break;
> case OPC_OUB_SET_DEV_INFO:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n");
> break;
> case OPC_OUB_SAS_RE_INITIALIZE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SAS_RE_INITIALIZE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_RE_INITIALIZE\n");
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown outbound Queue IOMB OPC = %x\n",
> - opc));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + "Unknown outbound Queue IOMB OPC = %x\n",
> + opc);
> break;
> }
> }
> @@ -4466,19 +4220,19 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> circularQ = &pm8001_ha->inbnd_q_tbl[0];
> if (task->data_dir == DMA_NONE) {
> ATAP = 0x04; /* no data*/
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n"));
> + pm8001_dbg(pm8001_ha, IO, "no data\n");
> } else if (likely(!task->ata_task.device_control_reg_update)) {
> if (task->ata_task.dma_xfer) {
> ATAP = 0x06; /* DMA */
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n"));
> + pm8001_dbg(pm8001_ha, IO, "DMA\n");
> } else {
> ATAP = 0x05; /* PIO*/
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
> + pm8001_dbg(pm8001_ha, IO, "PIO\n");
> }
> if (task->ata_task.use_ncq &&
> dev->sata_dev.class != ATA_DEV_ATAPI) {
> ATAP = 0x07; /* FPDMA */
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
> + pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
> }
> }
> if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
> @@ -4535,10 +4289,10 @@ static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&task->task_state_lock,
> flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task 0x%p resp 0x%x "
> - " stat 0x%x but aborted by upper layer "
> - "\n", task, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "task 0x%p resp 0x%x stat 0x%x but aborted by upper layer\n",
> + task, ts->resp,
> + ts->stat);
> pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
> } else {
> spin_unlock_irqrestore(&task->task_state_lock,
> @@ -4687,8 +4441,8 @@ int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha,
> memset(&payload, 0, sizeof(payload));
> payload.tag = cpu_to_le32(1);
> payload.device_id = cpu_to_le32(device_id);
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("unregister device device_id = %d\n", device_id));
> + pm8001_dbg(pm8001_ha, MSG, "unregister device device_id = %d\n",
> + device_id);
> ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
> sizeof(payload), 0);
> return ret;
> @@ -4740,9 +4494,9 @@ static irqreturn_t
> pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
> {
> pm8001_chip_interrupt_disable(pm8001_ha, vec);
> - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
> - "irq vec %d, ODMR:0x%x\n",
> - vec, pm8001_cr32(pm8001_ha, 0, 0x30)));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + "irq vec %d, ODMR:0x%x\n",
> + vec, pm8001_cr32(pm8001_ha, 0, 0x30));
> process_oq(pm8001_ha, vec);
> pm8001_chip_interrupt_enable(pm8001_ha, vec);
> return IRQ_HANDLED;
> @@ -4779,9 +4533,8 @@ int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
> {
> u32 opc, device_id;
> int rc = TMF_RESP_FUNC_FAILED;
> - PM8001_EH_DBG(pm8001_ha,
> - pm8001_printk("cmd_tag = %x, abort task tag = 0x%x",
> - cmd_tag, task_tag));
> + pm8001_dbg(pm8001_ha, EH, "cmd_tag = %x, abort task tag = 0x%x\n",
> + cmd_tag, task_tag);
> if (pm8001_dev->dev_type == SAS_END_DEVICE)
> opc = OPC_INB_SSP_ABORT;
> else if (pm8001_dev->dev_type == SAS_SATA_DEV)
> @@ -4792,7 +4545,7 @@ int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
> rc = send_task_abort(pm8001_ha, opc, device_id, flag,
> task_tag, cmd_tag);
> if (rc != TMF_RESP_FUNC_COMPLETE)
> - PM8001_EH_DBG(pm8001_ha, pm8001_printk("rc= %d\n", rc));
> + pm8001_dbg(pm8001_ha, EH, "rc= %d\n", rc);
> return rc;
> }
>
> @@ -5058,8 +4811,9 @@ pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
> if (!fw_control_context)
> return -ENOMEM;
> fw_control = (struct fw_control_info *)&ioctl_payload->func_specific;
> - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
> - "dma fw_control context input length :%x\n", fw_control->len));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + "dma fw_control context input length :%x\n",
> + fw_control->len);
> memcpy(buffer, fw_control->buffer, fw_control->len);
> flash_update_info.sgl.addr = cpu_to_le64(phys_addr);
> flash_update_info.sgl.im_len.len = cpu_to_le32(fw_control->len);
> diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
> index fb471ad3720a..96b7281b2fca 100644
> --- a/drivers/scsi/pm8001/pm8001_init.c
> +++ b/drivers/scsi/pm8001/pm8001_init.c
> @@ -271,15 +271,14 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
>
> spin_lock_init(&pm8001_ha->lock);
> spin_lock_init(&pm8001_ha->bitmap_lock);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("pm8001_alloc: PHY:%x\n",
> - pm8001_ha->chip->n_phy));
> + pm8001_dbg(pm8001_ha, INIT, "pm8001_alloc: PHY:%x\n",
> + pm8001_ha->chip->n_phy);
>
> /* Setup Interrupt */
> rc = pm8001_setup_irq(pm8001_ha);
> if (rc) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "pm8001_setup_irq failed [ret: %d]\n", rc));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "pm8001_setup_irq failed [ret: %d]\n", rc);
> goto err_out_shost;
> }
> /* Request Interrupt */
> @@ -394,9 +393,9 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
> &pm8001_ha->memoryMap.region[i].phys_addr_lo,
> pm8001_ha->memoryMap.region[i].total_len,
> pm8001_ha->memoryMap.region[i].alignment) != 0) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Mem%d alloc failed\n",
> - i));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Mem%d alloc failed\n",
> + i);
> goto err_out;
> }
> }
> @@ -467,15 +466,15 @@ static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
> pm8001_ha->io_mem[logicalBar].memvirtaddr =
> ioremap(pm8001_ha->io_mem[logicalBar].membase,
> pm8001_ha->io_mem[logicalBar].memsize);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("PCI: bar %d, logicalBar %d ",
> - bar, logicalBar));
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
> - "base addr %llx virt_addr=%llx len=%d\n",
> - (u64)pm8001_ha->io_mem[logicalBar].membase,
> - (u64)(unsigned long)
> - pm8001_ha->io_mem[logicalBar].memvirtaddr,
> - pm8001_ha->io_mem[logicalBar].memsize));
> + pm8001_dbg(pm8001_ha, INIT,
> + "PCI: bar %d, logicalBar %d\n",
> + bar, logicalBar);
> + pm8001_dbg(pm8001_ha, INIT,
> + "base addr %llx virt_addr=%llx len=%d\n",
> + (u64)pm8001_ha->io_mem[logicalBar].membase,
> + (u64)(unsigned long)
> + pm8001_ha->io_mem[logicalBar].memvirtaddr,
> + pm8001_ha->io_mem[logicalBar].memsize);
> } else {
> pm8001_ha->io_mem[logicalBar].membase = 0;
> pm8001_ha->io_mem[logicalBar].memsize = 0;
> @@ -520,8 +519,8 @@ static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
> else {
> pm8001_ha->link_rate = LINKRATE_15 | LINKRATE_30 |
> LINKRATE_60 | LINKRATE_120;
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "Setting link rate to default value\n"));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Setting link rate to default value\n");
> }
> sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
> /* IOMB size is 128 for 8088/89 controllers */
> @@ -684,13 +683,13 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
> payload.offset = 0;
> payload.func_specific = kzalloc(payload.rd_length, GFP_KERNEL);
> if (!payload.func_specific) {
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk("mem alloc fail\n"));
> + pm8001_dbg(pm8001_ha, INIT, "mem alloc fail\n");
> return;
> }
> rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
> if (rc) {
> kfree(payload.func_specific);
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
> + pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
> return;
> }
> wait_for_completion(&completion);
> @@ -718,9 +717,8 @@ static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
> sas_add[7] = sas_add[7] + 4;
> memcpy(&pm8001_ha->phy[i].dev_sas_addr,
> sas_add, SAS_ADDR_SIZE);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("phy %d sas_addr = %016llx\n", i,
> - pm8001_ha->phy[i].dev_sas_addr));
> + pm8001_dbg(pm8001_ha, INIT, "phy %d sas_addr = %016llx\n", i,
> + pm8001_ha->phy[i].dev_sas_addr);
> }
> kfree(payload.func_specific);
> #else
> @@ -760,7 +758,7 @@ static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
> rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
> if (rc) {
> kfree(payload.func_specific);
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk("nvmd failed\n"));
> + pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
> return -ENOMEM;
> }
> wait_for_completion(&completion);
> @@ -854,9 +852,9 @@ void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
> break;
>
> default:
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Unknown subsystem device=0x%.04x",
> - pm8001_ha->pdev->subsystem_device));
> + pm8001_dbg(pm8001_ha, INIT,
> + "Unknown subsystem device=0x%.04x\n",
> + pm8001_ha->pdev->subsystem_device);
> }
> }
>
> @@ -950,9 +948,9 @@ static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
> /* Maximum queue number updating in HBA structure */
> pm8001_ha->max_q_num = number_of_intr;
>
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
> - "pci_alloc_irq_vectors request ret:%d no of intr %d\n",
> - rc, pm8001_ha->number_of_intr));
> + pm8001_dbg(pm8001_ha, INIT,
> + "pci_alloc_irq_vectors request ret:%d no of intr %d\n",
> + rc, pm8001_ha->number_of_intr);
> return 0;
> }
>
> @@ -964,9 +962,9 @@ static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
> if (pm8001_ha->chip_id != chip_8001)
> flag &= ~IRQF_SHARED;
>
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("pci_enable_msix request number of intr %d\n",
> - pm8001_ha->number_of_intr));
> + pm8001_dbg(pm8001_ha, INIT,
> + "pci_enable_msix request number of intr %d\n",
> + pm8001_ha->number_of_intr);
>
> for (i = 0; i < pm8001_ha->number_of_intr; i++) {
> snprintf(pm8001_ha->intr_drvname[i],
> @@ -1002,8 +1000,7 @@ static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha)
> #ifdef PM8001_USE_MSIX
> if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
> return pm8001_setup_msix(pm8001_ha);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("MSIX not supported!!!\n"));
> + pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
> #endif
> return 0;
> }
> @@ -1023,8 +1020,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
> if (pdev->msix_cap && pci_msi_enabled())
> return pm8001_request_msix(pm8001_ha);
> else {
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("MSIX not supported!!!\n"));
> + pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
> goto intx;
> }
> #endif
> @@ -1108,8 +1104,8 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
> PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
> rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
> if (rc) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "chip_init failed [ret: %d]\n", rc));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "chip_init failed [ret: %d]\n", rc);
> goto err_out_ha_free;
> }
>
> @@ -1137,8 +1133,8 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
> pm8001_post_sas_ha_init(shost, chip);
> rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
> if (rc) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "sas_register_ha failed [ret: %d]\n", rc));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "sas_register_ha failed [ret: %d]\n", rc);
> goto err_out_shost;
> }
> list_add_tail(&pm8001_ha->list, &hba_list);
> @@ -1190,8 +1186,8 @@ pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha, struct Scsi_Host *shost,
> pm8001_ha->ccb_info = (struct pm8001_ccb_info *)
> kcalloc(ccb_count, sizeof(struct pm8001_ccb_info), GFP_KERNEL);
> if (!pm8001_ha->ccb_info) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk
> - ("Unable to allocate memory for ccb\n"));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Unable to allocate memory for ccb\n");
> goto err_out_noccb;
> }
> for (i = 0; i < ccb_count; i++) {
> @@ -1199,8 +1195,8 @@ pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha, struct Scsi_Host *shost,
> sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG,
> &pm8001_ha->ccb_info[i].ccb_dma_handle);
> if (!pm8001_ha->ccb_info[i].buf_prd) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk
> - ("pm80xx: ccb prd memory allocation error\n"));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "pm80xx: ccb prd memory allocation error\n");
> goto err_out;
> }
> pm8001_ha->ccb_info[i].task = NULL;
> @@ -1344,8 +1340,7 @@ static int pm8001_pci_resume(struct pci_dev *pdev)
> /* chip soft rst only for spc */
> if (pm8001_ha->chip_id == chip_8001) {
> PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("chip soft reset successful\n"));
> + pm8001_dbg(pm8001_ha, INIT, "chip soft reset successful\n");
> }
> rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
> if (rc)
> diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
> index e91497847620..505a885b4c77 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.c
> +++ b/drivers/scsi/pm8001/pm8001_sas.c
> @@ -250,8 +250,7 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> return 0;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("func 0x%x\n", func));
> + pm8001_dbg(pm8001_ha, DEVIO, "func 0x%x\n", func);
> rc = -EOPNOTSUPP;
> }
> msleep(300);
> @@ -405,7 +404,7 @@ static int pm8001_task_exec(struct sas_task *task,
> t->task_done(t);
> return 0;
> }
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
> + pm8001_dbg(pm8001_ha, IO, "pm8001_task_exec device\n");
> spin_lock_irqsave(&pm8001_ha->lock, flags);
> do {
> dev = t->dev;
> @@ -480,8 +479,7 @@ static int pm8001_task_exec(struct sas_task *task,
> }
>
> if (rc) {
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("rc is %x\n", rc));
> + pm8001_dbg(pm8001_ha, IO, "rc is %x\n", rc);
> atomic_dec(&pm8001_dev->running_req);
> goto err_out_tag;
> }
> @@ -570,9 +568,9 @@ static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
> }
> }
> if (dev == PM8001_MAX_DEVICES) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("max support %d devices, ignore ..\n",
> - PM8001_MAX_DEVICES));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "max support %d devices, ignore ..\n",
> + PM8001_MAX_DEVICES);
> }
> return NULL;
> }
> @@ -590,8 +588,7 @@ struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
> return &pm8001_ha->devices[dev];
> }
> if (dev == PM8001_MAX_DEVICES) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("NO MATCHING "
> - "DEVICE FOUND !!!\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "NO MATCHING DEVICE FOUND !!!\n");
> }
> return NULL;
> }
> @@ -652,10 +649,10 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
> }
> }
> if (phy_id == parent_dev->ex_dev.num_phys) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Error: no attached dev:%016llx"
> - " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
> - SAS_ADDR(parent_dev->sas_addr)));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Error: no attached dev:%016llx at ex:%016llx.\n",
> + SAS_ADDR(dev->sas_addr),
> + SAS_ADDR(parent_dev->sas_addr));
> res = -1;
> }
> } else {
> @@ -665,7 +662,7 @@ static int pm8001_dev_found_notify(struct domain_device *dev)
> flag = 1; /* directly sata */
> }
> } /*register this device to HBA*/
> - PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device\n"));
> + pm8001_dbg(pm8001_ha, DISC, "Found device\n");
> PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> wait_for_completion(&completion);
> @@ -737,9 +734,7 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
>
> if (res) {
> del_timer(&task->slow_task->timer);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Executing internal task "
> - "failed\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Executing internal task failed\n");
> goto ex_err;
> }
> wait_for_completion(&task->slow_task->completion);
> @@ -753,9 +748,9 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
> /* Even TMF timed out, return direct. */
> if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
> if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("TMF task[%x]timeout.\n",
> - tmf->tmf));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "TMF task[%x]timeout.\n",
> + tmf->tmf);
> goto ex_err;
> }
> }
> @@ -776,17 +771,15 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
>
> if (task->task_status.resp == SAS_TASK_COMPLETE &&
> task->task_status.stat == SAS_DATA_OVERRUN) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Blocked task error.\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Blocked task error.\n");
> res = -EMSGSIZE;
> break;
> } else {
> - PM8001_EH_DBG(pm8001_ha,
> - pm8001_printk(" Task to dev %016llx response:"
> - "0x%x status 0x%x\n",
> - SAS_ADDR(dev->sas_addr),
> - task->task_status.resp,
> - task->task_status.stat));
> + pm8001_dbg(pm8001_ha, EH,
> + " Task to dev %016llx response:0x%x status 0x%x\n",
> + SAS_ADDR(dev->sas_addr),
> + task->task_status.resp,
> + task->task_status.stat);
> sas_free_task(task);
> task = NULL;
> }
> @@ -833,9 +826,7 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
>
> if (res) {
> del_timer(&task->slow_task->timer);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Executing internal task "
> - "failed\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Executing internal task failed\n");
> goto ex_err;
> }
> wait_for_completion(&task->slow_task->completion);
> @@ -843,8 +834,8 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
> /* Even TMF timed out, return direct. */
> if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
> if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("TMF task timeout.\n"));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "TMF task timeout.\n");
> goto ex_err;
> }
> }
> @@ -855,12 +846,11 @@ pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
> break;
>
> } else {
> - PM8001_EH_DBG(pm8001_ha,
> - pm8001_printk(" Task to dev %016llx response: "
> - "0x%x status 0x%x\n",
> - SAS_ADDR(dev->sas_addr),
> - task->task_status.resp,
> - task->task_status.stat));
> + pm8001_dbg(pm8001_ha, EH,
> + " Task to dev %016llx response: 0x%x status 0x%x\n",
> + SAS_ADDR(dev->sas_addr),
> + task->task_status.resp,
> + task->task_status.stat);
> sas_free_task(task);
> task = NULL;
> }
> @@ -886,9 +876,8 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
> if (pm8001_dev) {
> u32 device_id = pm8001_dev->device_id;
>
> - PM8001_DISC_DBG(pm8001_ha,
> - pm8001_printk("found dev[%d:%x] is gone.\n",
> - pm8001_dev->device_id, pm8001_dev->dev_type));
> + pm8001_dbg(pm8001_ha, DISC, "found dev[%d:%x] is gone.\n",
> + pm8001_dev->device_id, pm8001_dev->dev_type);
> if (atomic_read(&pm8001_dev->running_req)) {
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
> @@ -900,8 +889,7 @@ static void pm8001_dev_gone_notify(struct domain_device *dev)
> PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
> pm8001_free_dev(pm8001_dev);
> } else {
> - PM8001_DISC_DBG(pm8001_ha,
> - pm8001_printk("Found dev has gone.\n"));
> + pm8001_dbg(pm8001_ha, DISC, "Found dev has gone.\n");
> }
> dev->lldd_dev = NULL;
> spin_unlock_irqrestore(&pm8001_ha->lock, flags);
> @@ -1021,9 +1009,9 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
> }
> rc = sas_phy_reset(phy, 1);
> if (rc) {
> - PM8001_EH_DBG(pm8001_ha,
> - pm8001_printk("phy reset failed for device %x\n"
> - "with rc %d\n", pm8001_dev->device_id, rc));
> + pm8001_dbg(pm8001_ha, EH,
> + "phy reset failed for device %x\n"
> + "with rc %d\n", pm8001_dev->device_id, rc);
> rc = TMF_RESP_FUNC_FAILED;
> goto out;
> }
> @@ -1031,17 +1019,16 @@ int pm8001_I_T_nexus_reset(struct domain_device *dev)
> rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
> dev, 1, 0);
> if (rc) {
> - PM8001_EH_DBG(pm8001_ha,
> - pm8001_printk("task abort failed %x\n"
> - "with rc %d\n", pm8001_dev->device_id, rc));
> + pm8001_dbg(pm8001_ha, EH, "task abort failed %x\n"
> + "with rc %d\n", pm8001_dev->device_id, rc);
> rc = TMF_RESP_FUNC_FAILED;
> }
> } else {
> rc = sas_phy_reset(phy, 1);
> msleep(2000);
> }
> - PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
> - pm8001_dev->device_id, rc));
> + pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n",
> + pm8001_dev->device_id, rc);
> out:
> sas_put_local_phy(phy);
> return rc;
> @@ -1064,8 +1051,7 @@ int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
> pm8001_dev = dev->lldd_dev;
> pm8001_ha = pm8001_find_ha_by_dev(dev);
>
> - PM8001_EH_DBG(pm8001_ha,
> - pm8001_printk("I_T_Nexus handler invoked !!"));
> + pm8001_dbg(pm8001_ha, EH, "I_T_Nexus handler invoked !!\n");
>
> phy = sas_get_local_phy(dev);
>
> @@ -1104,8 +1090,8 @@ int pm8001_I_T_nexus_event_handler(struct domain_device *dev)
> rc = sas_phy_reset(phy, 1);
> msleep(2000);
> }
> - PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
> - pm8001_dev->device_id, rc));
> + pm8001_dbg(pm8001_ha, EH, " for device[%x]:rc=%d\n",
> + pm8001_dev->device_id, rc);
> out:
> sas_put_local_phy(phy);
>
> @@ -1134,8 +1120,8 @@ int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
> rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
> }
> /* If failed, fall-through I_T_Nexus reset */
> - PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
> - pm8001_dev->device_id, rc));
> + pm8001_dbg(pm8001_ha, EH, "for device[%x]:rc=%d\n",
> + pm8001_dev->device_id, rc);
> return rc;
> }
>
> @@ -1143,7 +1129,6 @@ int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
> int pm8001_query_task(struct sas_task *task)
> {
> u32 tag = 0xdeadbeef;
> - int i = 0;
> struct scsi_lun lun;
> struct pm8001_tmf_task tmf_task;
> int rc = TMF_RESP_FUNC_FAILED;
> @@ -1162,10 +1147,7 @@ int pm8001_query_task(struct sas_task *task)
> rc = TMF_RESP_FUNC_FAILED;
> return rc;
> }
> - PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
> - for (i = 0; i < 16; i++)
> - printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
> - printk(KERN_INFO "]\n");
> + pm8001_dbg(pm8001_ha, EH, "Query:[%16ph]\n", cmnd->cmnd);
> tmf_task.tmf = TMF_QUERY_TASK;
> tmf_task.tag_of_task_to_be_managed = tag;
>
> @@ -1173,15 +1155,14 @@ int pm8001_query_task(struct sas_task *task)
> switch (rc) {
> /* The task is still in Lun, release it then */
> case TMF_RESP_FUNC_SUCC:
> - PM8001_EH_DBG(pm8001_ha,
> - pm8001_printk("The task is still in Lun\n"));
> + pm8001_dbg(pm8001_ha, EH,
> + "The task is still in Lun\n");
> break;
> /* The task is not in Lun or failed, reset the phy */
> case TMF_RESP_FUNC_FAILED:
> case TMF_RESP_FUNC_COMPLETE:
> - PM8001_EH_DBG(pm8001_ha,
> - pm8001_printk("The task is not in Lun or failed,"
> - " reset the phy\n"));
> + pm8001_dbg(pm8001_ha, EH,
> + "The task is not in Lun or failed, reset the phy\n");
> break;
> }
> }
> @@ -1267,8 +1248,8 @@ int pm8001_abort_task(struct sas_task *task)
> * leaking the task in libsas or losing the race and
> * getting a double free.
> */
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("Waiting for local phy ctl\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "Waiting for local phy ctl\n");
> ret = wait_for_completion_timeout(&completion,
> PM8001_TASK_TIMEOUT * HZ);
> if (!ret || !phy->reset_success) {
> @@ -1278,8 +1259,8 @@ int pm8001_abort_task(struct sas_task *task)
> /* 3. Wait for Port Reset complete or
> * Port reset TMO
> */
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("Waiting for Port reset\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "Waiting for Port reset\n");
> ret = wait_for_completion_timeout(
> &completion_reset,
> PM8001_TASK_TIMEOUT * HZ);
> @@ -1358,9 +1339,8 @@ int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
> struct pm8001_device *pm8001_dev = dev->lldd_dev;
> struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
>
> - PM8001_EH_DBG(pm8001_ha,
> - pm8001_printk("I_T_L_Q clear task set[%x]\n",
> - pm8001_dev->device_id));
> + pm8001_dbg(pm8001_ha, EH, "I_T_L_Q clear task set[%x]\n",
> + pm8001_dev->device_id);
> tmf_task.tmf = TMF_CLEAR_TASK_SET;
> return pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
> }
> diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
> index 091574721ea1..5cd6fe6a7d2d 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.h
> +++ b/drivers/scsi/pm8001/pm8001_sas.h
> @@ -69,45 +69,16 @@
> #define PM8001_DEV_LOGGING 0x80 /* development message logging */
> #define PM8001_DEVIO_LOGGING 0x100 /* development io message logging */
> #define PM8001_IOERR_LOGGING 0x200 /* development io err message logging */
> -#define pm8001_printk(format, arg...) pr_info("%s:: %s %d:" \
> - format, pm8001_ha->name, __func__, __LINE__, ## arg)
> -#define PM8001_CHECK_LOGGING(HBA, LEVEL, CMD) \
> -do { \
> - if (unlikely(HBA->logging_level & LEVEL)) \
> - do { \
> - CMD; \
> - } while (0); \
> -} while (0);
>
> -#define PM8001_EH_DBG(HBA, CMD) \
> - PM8001_CHECK_LOGGING(HBA, PM8001_EH_LOGGING, CMD)
> +#define pm8001_printk(fmt, ...) \
> + pr_info("%s:: %s %d:" fmt, \
> + pm8001_ha->name, __func__, __LINE__, ##__VA_ARGS__)
>
> -#define PM8001_INIT_DBG(HBA, CMD) \
> - PM8001_CHECK_LOGGING(HBA, PM8001_INIT_LOGGING, CMD)
> -
> -#define PM8001_DISC_DBG(HBA, CMD) \
> - PM8001_CHECK_LOGGING(HBA, PM8001_DISC_LOGGING, CMD)
> -
> -#define PM8001_IO_DBG(HBA, CMD) \
> - PM8001_CHECK_LOGGING(HBA, PM8001_IO_LOGGING, CMD)
> -
> -#define PM8001_FAIL_DBG(HBA, CMD) \
> - PM8001_CHECK_LOGGING(HBA, PM8001_FAIL_LOGGING, CMD)
> -
> -#define PM8001_IOCTL_DBG(HBA, CMD) \
> - PM8001_CHECK_LOGGING(HBA, PM8001_IOCTL_LOGGING, CMD)
> -
> -#define PM8001_MSG_DBG(HBA, CMD) \
> - PM8001_CHECK_LOGGING(HBA, PM8001_MSG_LOGGING, CMD)
> -
> -#define PM8001_DEV_DBG(HBA, CMD) \
> - PM8001_CHECK_LOGGING(HBA, PM8001_DEV_LOGGING, CMD)
> -
> -#define PM8001_DEVIO_DBG(HBA, CMD) \
> - PM8001_CHECK_LOGGING(HBA, PM8001_DEVIO_LOGGING, CMD)
> -
> -#define PM8001_IOERR_DBG(HBA, CMD) \
> - PM8001_CHECK_LOGGING(HBA, PM8001_IOERR_LOGGING, CMD)
> +#define pm8001_dbg(HBA, level, fmt, ...) \
> +do { \
> + if (unlikely((HBA)->logging_level & PM8001_##level##_LOGGING)) \
> + pm8001_printk(fmt, ##__VA_ARGS__); \
> +} while (0)
>
> #define PM8001_USE_TASKLET
> #define PM8001_USE_MSIX
> diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
> index 24a4f6b9e79d..69f8244539e0 100644
> --- a/drivers/scsi/pm8001/pm80xx_hwi.c
> +++ b/drivers/scsi/pm8001/pm80xx_hwi.c
> @@ -58,9 +58,8 @@ int pm80xx_bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shift_value)
> reg_val = pm8001_cr32(pm8001_ha, 0, MEMBASE_II_SHIFT_REGISTER);
> } while ((reg_val != shift_value) && time_before(jiffies, start));
> if (reg_val != shift_value) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("TIMEOUT:MEMBASE_II_SHIFT_REGISTER"
> - " = 0x%x\n", reg_val));
> + pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:MEMBASE_II_SHIFT_REGISTER = 0x%x\n",
> + reg_val);
> return -1;
> }
> return 0;
> @@ -109,8 +108,8 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
> }
> /* initialize variables for very first call from host application */
> if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) {
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("forensic_info TYPE_NON_FATAL..............\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "forensic_info TYPE_NON_FATAL..............\n");
> direct_data = (u8 *)fatal_error_data;
> pm8001_ha->forensic_info.data_type = TYPE_NON_FATAL;
> pm8001_ha->forensic_info.data_buf.direct_len = SYSFS_OFFSET;
> @@ -123,17 +122,13 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
> MPI_FATAL_EDUMP_TABLE_SIGNATURE, 0x1234abcd);
>
> pm8001_ha->forensic_info.data_buf.direct_data = direct_data;
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("ossaHwCB: status1 %d\n", status));
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("ossaHwCB: read_len 0x%x\n",
> - pm8001_ha->forensic_info.data_buf.read_len));
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("ossaHwCB: direct_len 0x%x\n",
> - pm8001_ha->forensic_info.data_buf.direct_len));
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("ossaHwCB: direct_offset 0x%x\n",
> - pm8001_ha->forensic_info.data_buf.direct_offset));
> + pm8001_dbg(pm8001_ha, IO, "ossaHwCB: status1 %d\n", status);
> + pm8001_dbg(pm8001_ha, IO, "ossaHwCB: read_len 0x%x\n",
> + pm8001_ha->forensic_info.data_buf.read_len);
> + pm8001_dbg(pm8001_ha, IO, "ossaHwCB: direct_len 0x%x\n",
> + pm8001_ha->forensic_info.data_buf.direct_len);
> + pm8001_dbg(pm8001_ha, IO, "ossaHwCB: direct_offset 0x%x\n",
> + pm8001_ha->forensic_info.data_buf.direct_offset);
> }
> if (pm8001_ha->forensic_info.data_buf.direct_offset == 0) {
> /* start to get data */
> @@ -153,29 +148,24 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
> */
> length_to_read =
> accum_len - pm8001_ha->forensic_preserved_accumulated_transfer;
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("get_fatal_spcv: accum_len 0x%x\n", accum_len));
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("get_fatal_spcv: length_to_read 0x%x\n",
> - length_to_read));
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("get_fatal_spcv: last_offset 0x%x\n",
> - pm8001_ha->forensic_last_offset));
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("get_fatal_spcv: read_len 0x%x\n",
> - pm8001_ha->forensic_info.data_buf.read_len));
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("get_fatal_spcv:: direct_len 0x%x\n",
> - pm8001_ha->forensic_info.data_buf.direct_len));
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("get_fatal_spcv:: direct_offset 0x%x\n",
> - pm8001_ha->forensic_info.data_buf.direct_offset));
> + pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: accum_len 0x%x\n",
> + accum_len);
> + pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: length_to_read 0x%x\n",
> + length_to_read);
> + pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: last_offset 0x%x\n",
> + pm8001_ha->forensic_last_offset);
> + pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: read_len 0x%x\n",
> + pm8001_ha->forensic_info.data_buf.read_len);
> + pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv:: direct_len 0x%x\n",
> + pm8001_ha->forensic_info.data_buf.direct_len);
> + pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv:: direct_offset 0x%x\n",
> + pm8001_ha->forensic_info.data_buf.direct_offset);
>
> /* If accumulated length failed to read correctly fail the attempt.*/
> if (accum_len == 0xFFFFFFFF) {
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("Possible PCI issue 0x%x not expected\n",
> - accum_len));
> + pm8001_dbg(pm8001_ha, IO,
> + "Possible PCI issue 0x%x not expected\n",
> + accum_len);
> return status;
> }
> /* If accumulated length is zero fail the attempt */
> @@ -239,8 +229,8 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
> offset = (int)
> ((char *)pm8001_ha->forensic_info.data_buf.direct_data
> - (char *)buf);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("get_fatal_spcv:return1 0x%x\n", offset));
> + pm8001_dbg(pm8001_ha, IO,
> + "get_fatal_spcv:return1 0x%x\n", offset);
> return (char *)pm8001_ha->
> forensic_info.data_buf.direct_data -
> (char *)buf;
> @@ -262,8 +252,8 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
> offset = (int)
> ((char *)pm8001_ha->forensic_info.data_buf.direct_data
> - (char *)buf);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("get_fatal_spcv:return2 0x%x\n", offset));
> + pm8001_dbg(pm8001_ha, IO,
> + "get_fatal_spcv:return2 0x%x\n", offset);
> return (char *)pm8001_ha->
> forensic_info.data_buf.direct_data -
> (char *)buf;
> @@ -289,8 +279,8 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
> offset = (int)
> ((char *)pm8001_ha->forensic_info.data_buf.direct_data
> - (char *)buf);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("get_fatal_spcv: return3 0x%x\n", offset));
> + pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: return3 0x%x\n",
> + offset);
> return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
> (char *)buf;
> }
> @@ -327,9 +317,9 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
> } while ((reg_val) && time_before(jiffies, start));
>
> if (reg_val != 0) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "TIMEOUT:MPI_FATAL_EDUMP_TABLE_HDSHAKE 0x%x\n",
> - reg_val));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "TIMEOUT:MPI_FATAL_EDUMP_TABLE_HDSHAKE 0x%x\n",
> + reg_val);
> /* Fail the dump if a timeout occurs */
> pm8001_ha->forensic_info.data_buf.direct_data +=
> sprintf(
> @@ -351,9 +341,9 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
> time_before(jiffies, start));
>
> if (reg_val < 2) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "TIMEOUT:MPI_FATAL_EDUMP_TABLE_STATUS = 0x%x\n",
> - reg_val));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "TIMEOUT:MPI_FATAL_EDUMP_TABLE_STATUS = 0x%x\n",
> + reg_val);
> /* Fail the dump if a timeout occurs */
> pm8001_ha->forensic_info.data_buf.direct_data +=
> sprintf(
> @@ -387,8 +377,7 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
> }
> offset = (int)((char *)pm8001_ha->forensic_info.data_buf.direct_data
> - (char *)buf);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("get_fatal_spcv: return4 0x%x\n", offset));
> + pm8001_dbg(pm8001_ha, IO, "get_fatal_spcv: return4 0x%x\n", offset);
> return (char *)pm8001_ha->forensic_info.data_buf.direct_data -
> (char *)buf;
> }
> @@ -419,8 +408,7 @@ ssize_t pm80xx_get_non_fatal_dump(struct device *cdev,
> PAGE_SIZE, "Not supported for SPC controller");
> return 0;
> }
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("forensic_info TYPE_NON_FATAL...\n"));
> + pm8001_dbg(pm8001_ha, IO, "forensic_info TYPE_NON_FATAL...\n");
> /*
> * Step 1: Write the host buffer parameters in the MPI Fatal and
> * Non-Fatal Error Dump Capture Table.This is the buffer
> @@ -581,24 +569,24 @@ static void read_main_config_table(struct pm8001_hba_info *pm8001_ha)
> pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version =
> pm8001_mr32(address, MAIN_MPI_INACTIVE_FW_VERSION);
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "Main cfg table: sign:%x interface rev:%x fw_rev:%x\n",
> - pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature,
> - pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev,
> - pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev));
> -
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "table offset: gst:%x iq:%x oq:%x int vec:%x phy attr:%x\n",
> - pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset,
> - pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset,
> - pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset,
> - pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset,
> - pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset));
> -
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "Main cfg table; ila rev:%x Inactive fw rev:%x\n",
> - pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version,
> - pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version));
> + pm8001_dbg(pm8001_ha, DEV,
> + "Main cfg table: sign:%x interface rev:%x fw_rev:%x\n",
> + pm8001_ha->main_cfg_tbl.pm80xx_tbl.signature,
> + pm8001_ha->main_cfg_tbl.pm80xx_tbl.interface_rev,
> + pm8001_ha->main_cfg_tbl.pm80xx_tbl.firmware_rev);
> +
> + pm8001_dbg(pm8001_ha, DEV,
> + "table offset: gst:%x iq:%x oq:%x int vec:%x phy attr:%x\n",
> + pm8001_ha->main_cfg_tbl.pm80xx_tbl.gst_offset,
> + pm8001_ha->main_cfg_tbl.pm80xx_tbl.inbound_queue_offset,
> + pm8001_ha->main_cfg_tbl.pm80xx_tbl.outbound_queue_offset,
> + pm8001_ha->main_cfg_tbl.pm80xx_tbl.int_vec_table_offset,
> + pm8001_ha->main_cfg_tbl.pm80xx_tbl.phy_attr_table_offset);
> +
> + pm8001_dbg(pm8001_ha, DEV,
> + "Main cfg table; ila rev:%x Inactive fw rev:%x\n",
> + pm8001_ha->main_cfg_tbl.pm80xx_tbl.ila_version,
> + pm8001_ha->main_cfg_tbl.pm80xx_tbl.inc_fw_version);
> }
>
> /**
> @@ -808,10 +796,10 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
> pm8001_ha->inbnd_q_tbl[i].producer_idx = 0;
> pm8001_ha->inbnd_q_tbl[i].consumer_index = 0;
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "IQ %d pi_bar 0x%x pi_offset 0x%x\n", i,
> - pm8001_ha->inbnd_q_tbl[i].pi_pci_bar,
> - pm8001_ha->inbnd_q_tbl[i].pi_offset));
> + pm8001_dbg(pm8001_ha, DEV,
> + "IQ %d pi_bar 0x%x pi_offset 0x%x\n", i,
> + pm8001_ha->inbnd_q_tbl[i].pi_pci_bar,
> + pm8001_ha->inbnd_q_tbl[i].pi_offset);
> }
> for (i = 0; i < pm8001_ha->max_q_num; i++) {
> pm8001_ha->outbnd_q_tbl[i].element_size_cnt =
> @@ -841,10 +829,10 @@ static void init_default_table_values(struct pm8001_hba_info *pm8001_ha)
> pm8001_ha->outbnd_q_tbl[i].consumer_idx = 0;
> pm8001_ha->outbnd_q_tbl[i].producer_index = 0;
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "OQ %d ci_bar 0x%x ci_offset 0x%x\n", i,
> - pm8001_ha->outbnd_q_tbl[i].ci_pci_bar,
> - pm8001_ha->outbnd_q_tbl[i].ci_offset));
> + pm8001_dbg(pm8001_ha, DEV,
> + "OQ %d ci_bar 0x%x ci_offset 0x%x\n", i,
> + pm8001_ha->outbnd_q_tbl[i].ci_pci_bar,
> + pm8001_ha->outbnd_q_tbl[i].ci_offset);
> }
> }
>
> @@ -878,9 +866,9 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
> ((pm8001_ha->max_q_num - 1) << 8);
> pm8001_mw32(address, MAIN_FATAL_ERROR_INTERRUPT,
> pm8001_ha->main_cfg_tbl.pm80xx_tbl.fatal_err_interrupt);
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "Updated Fatal error interrupt vector 0x%x\n",
> - pm8001_mr32(address, MAIN_FATAL_ERROR_INTERRUPT)));
> + pm8001_dbg(pm8001_ha, DEV,
> + "Updated Fatal error interrupt vector 0x%x\n",
> + pm8001_mr32(address, MAIN_FATAL_ERROR_INTERRUPT));
>
> pm8001_mw32(address, MAIN_EVENT_CRC_CHECK,
> pm8001_ha->main_cfg_tbl.pm80xx_tbl.crc_core_dump);
> @@ -891,9 +879,9 @@ static void update_main_config_table(struct pm8001_hba_info *pm8001_ha)
> pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping |= 0x20000000;
> pm8001_mw32(address, MAIN_GPIO_LED_FLAGS_OFFSET,
> pm8001_ha->main_cfg_tbl.pm80xx_tbl.gpio_led_mapping);
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "Programming DW 0x21 in main cfg table with 0x%x\n",
> - pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET)));
> + pm8001_dbg(pm8001_ha, DEV,
> + "Programming DW 0x21 in main cfg table with 0x%x\n",
> + pm8001_mr32(address, MAIN_GPIO_LED_FLAGS_OFFSET));
>
> pm8001_mw32(address, MAIN_PORT_RECOVERY_TIMER,
> pm8001_ha->main_cfg_tbl.pm80xx_tbl.port_recovery_timer);
> @@ -934,20 +922,20 @@ static void update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
> pm8001_mw32(address, offset + IB_CI_BASE_ADDR_LO_OFFSET,
> pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "IQ %d: Element pri size 0x%x\n",
> - number,
> - pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt));
> + pm8001_dbg(pm8001_ha, DEV,
> + "IQ %d: Element pri size 0x%x\n",
> + number,
> + pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "IQ upr base addr 0x%x IQ lwr base addr 0x%x\n",
> - pm8001_ha->inbnd_q_tbl[number].upper_base_addr,
> - pm8001_ha->inbnd_q_tbl[number].lower_base_addr));
> + pm8001_dbg(pm8001_ha, DEV,
> + "IQ upr base addr 0x%x IQ lwr base addr 0x%x\n",
> + pm8001_ha->inbnd_q_tbl[number].upper_base_addr,
> + pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "CI upper base addr 0x%x CI lower base addr 0x%x\n",
> - pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr,
> - pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr));
> + pm8001_dbg(pm8001_ha, DEV,
> + "CI upper base addr 0x%x CI lower base addr 0x%x\n",
> + pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr,
> + pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
> }
>
> /**
> @@ -973,20 +961,20 @@ static void update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha,
> pm8001_mw32(address, offset + OB_INTERRUPT_COALES_OFFSET,
> pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "OQ %d: Element pri size 0x%x\n",
> - number,
> - pm8001_ha->outbnd_q_tbl[number].element_size_cnt));
> + pm8001_dbg(pm8001_ha, DEV,
> + "OQ %d: Element pri size 0x%x\n",
> + number,
> + pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "OQ upr base addr 0x%x OQ lwr base addr 0x%x\n",
> - pm8001_ha->outbnd_q_tbl[number].upper_base_addr,
> - pm8001_ha->outbnd_q_tbl[number].lower_base_addr));
> + pm8001_dbg(pm8001_ha, DEV,
> + "OQ upr base addr 0x%x OQ lwr base addr 0x%x\n",
> + pm8001_ha->outbnd_q_tbl[number].upper_base_addr,
> + pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "PI upper base addr 0x%x PI lower base addr 0x%x\n",
> - pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr,
> - pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr));
> + pm8001_dbg(pm8001_ha, DEV,
> + "PI upper base addr 0x%x PI lower base addr 0x%x\n",
> + pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr,
> + pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
> }
>
> /**
> @@ -1016,8 +1004,9 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
>
> if (!max_wait_count) {
> /* additional check */
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "Inb doorbell clear not toggled[value:%x]\n", value));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Inb doorbell clear not toggled[value:%x]\n",
> + value);
> return -EBUSY;
> }
> /* check the MPI-State for initialization upto 100ms*/
> @@ -1069,9 +1058,9 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
> if (!max_wait_count)
> ret = -1;
> else {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" ila ready status in %d millisec\n",
> - (max_wait_time - max_wait_count)));
> + pm8001_dbg(pm8001_ha, MSG,
> + " ila ready status in %d millisec\n",
> + (max_wait_time - max_wait_count));
> }
>
> /* check RAAE status */
> @@ -1084,9 +1073,9 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
> if (!max_wait_count)
> ret = -1;
> else {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" raae ready status in %d millisec\n",
> - (max_wait_time - max_wait_count)));
> + pm8001_dbg(pm8001_ha, MSG,
> + " raae ready status in %d millisec\n",
> + (max_wait_time - max_wait_count));
> }
>
> /* check iop0 status */
> @@ -1099,9 +1088,9 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
> if (!max_wait_count)
> ret = -1;
> else {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" iop0 ready status in %d millisec\n",
> - (max_wait_time - max_wait_count)));
> + pm8001_dbg(pm8001_ha, MSG,
> + " iop0 ready status in %d millisec\n",
> + (max_wait_time - max_wait_count));
> }
>
> /* check iop1 status only for 16 port controllers */
> @@ -1117,9 +1106,9 @@ static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
> if (!max_wait_count)
> ret = -1;
> else {
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "iop1 ready status in %d millisec\n",
> - (max_wait_time - max_wait_count)));
> + pm8001_dbg(pm8001_ha, MSG,
> + "iop1 ready status in %d millisec\n",
> + (max_wait_time - max_wait_count));
> }
> }
>
> @@ -1137,13 +1126,11 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
> value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
> offset = value & 0x03FFFFFF; /* scratch pad 0 TBL address */
>
> - PM8001_DEV_DBG(pm8001_ha,
> - pm8001_printk("Scratchpad 0 Offset: 0x%x value 0x%x\n",
> - offset, value));
> + pm8001_dbg(pm8001_ha, DEV, "Scratchpad 0 Offset: 0x%x value 0x%x\n",
> + offset, value);
> pcilogic = (value & 0xFC000000) >> 26;
> pcibar = get_pci_bar_index(pcilogic);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Scratchpad 0 PCI BAR: %d\n", pcibar));
> + pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar);
> pm8001_ha->main_cfg_tbl_addr = base_addr =
> pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
> pm8001_ha->general_stat_tbl_addr =
> @@ -1165,33 +1152,25 @@ static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
> base_addr + (pm8001_cr32(pm8001_ha, pcibar, offset + 0xA0) &
> 0xFFFFFF);
>
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("GST OFFSET 0x%x\n",
> - pm8001_cr32(pm8001_ha, pcibar, offset + 0x18)));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("INBND OFFSET 0x%x\n",
> - pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C)));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("OBND OFFSET 0x%x\n",
> - pm8001_cr32(pm8001_ha, pcibar, offset + 0x20)));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("IVT OFFSET 0x%x\n",
> - pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C)));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("PSPA OFFSET 0x%x\n",
> - pm8001_cr32(pm8001_ha, pcibar, offset + 0x90)));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("addr - main cfg %p general status %p\n",
> - pm8001_ha->main_cfg_tbl_addr,
> - pm8001_ha->general_stat_tbl_addr));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("addr - inbnd %p obnd %p\n",
> - pm8001_ha->inbnd_q_tbl_addr,
> - pm8001_ha->outbnd_q_tbl_addr));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("addr - pspa %p ivt %p\n",
> - pm8001_ha->pspa_q_tbl_addr,
> - pm8001_ha->ivt_tbl_addr));
> + pm8001_dbg(pm8001_ha, INIT, "GST OFFSET 0x%x\n",
> + pm8001_cr32(pm8001_ha, pcibar, offset + 0x18));
> + pm8001_dbg(pm8001_ha, INIT, "INBND OFFSET 0x%x\n",
> + pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C));
> + pm8001_dbg(pm8001_ha, INIT, "OBND OFFSET 0x%x\n",
> + pm8001_cr32(pm8001_ha, pcibar, offset + 0x20));
> + pm8001_dbg(pm8001_ha, INIT, "IVT OFFSET 0x%x\n",
> + pm8001_cr32(pm8001_ha, pcibar, offset + 0x8C));
> + pm8001_dbg(pm8001_ha, INIT, "PSPA OFFSET 0x%x\n",
> + pm8001_cr32(pm8001_ha, pcibar, offset + 0x90));
> + pm8001_dbg(pm8001_ha, INIT, "addr - main cfg %p general status %p\n",
> + pm8001_ha->main_cfg_tbl_addr,
> + pm8001_ha->general_stat_tbl_addr);
> + pm8001_dbg(pm8001_ha, INIT, "addr - inbnd %p obnd %p\n",
> + pm8001_ha->inbnd_q_tbl_addr,
> + pm8001_ha->outbnd_q_tbl_addr);
> + pm8001_dbg(pm8001_ha, INIT, "addr - pspa %p ivt %p\n",
> + pm8001_ha->pspa_q_tbl_addr,
> + pm8001_ha->ivt_tbl_addr);
> }
>
> /**
> @@ -1225,9 +1204,9 @@ pm80xx_set_thermal_config(struct pm8001_hba_info *pm8001_ha)
> (THERMAL_ENABLE << 8) | page_code;
> payload.cfg_pg[1] = (LTEMPHIL << 24) | (RTEMPHIL << 8);
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "Setting up thermal config. cfg_pg 0 0x%x cfg_pg 1 0x%x\n",
> - payload.cfg_pg[0], payload.cfg_pg[1]));
> + pm8001_dbg(pm8001_ha, DEV,
> + "Setting up thermal config. cfg_pg 0 0x%x cfg_pg 1 0x%x\n",
> + payload.cfg_pg[0], payload.cfg_pg[1]);
>
> rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
> sizeof(payload), 0);
> @@ -1282,32 +1261,24 @@ pm80xx_set_sas_protocol_timer_config(struct pm8001_hba_info *pm8001_ha)
> | SAS_COPNRJT_RTRY_THR;
> SASConfigPage.MAX_AIP = SAS_MAX_AIP;
>
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SASConfigPage.pageCode "
> - "0x%08x\n", SASConfigPage.pageCode));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SASConfigPage.MST_MSI "
> - " 0x%08x\n", SASConfigPage.MST_MSI));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SASConfigPage.STP_SSP_MCT_TMO "
> - " 0x%08x\n", SASConfigPage.STP_SSP_MCT_TMO));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SASConfigPage.STP_FRM_TMO "
> - " 0x%08x\n", SASConfigPage.STP_FRM_TMO));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SASConfigPage.STP_IDLE_TMO "
> - " 0x%08x\n", SASConfigPage.STP_IDLE_TMO));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SASConfigPage.OPNRJT_RTRY_INTVL "
> - " 0x%08x\n", SASConfigPage.OPNRJT_RTRY_INTVL));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO "
> - " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR "
> - " 0x%08x\n", SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR));
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk("SASConfigPage.MAX_AIP "
> - " 0x%08x\n", SASConfigPage.MAX_AIP));
> + pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.pageCode 0x%08x\n",
> + SASConfigPage.pageCode);
> + pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MST_MSI 0x%08x\n",
> + SASConfigPage.MST_MSI);
> + pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_SSP_MCT_TMO 0x%08x\n",
> + SASConfigPage.STP_SSP_MCT_TMO);
> + pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_FRM_TMO 0x%08x\n",
> + SASConfigPage.STP_FRM_TMO);
> + pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.STP_IDLE_TMO 0x%08x\n",
> + SASConfigPage.STP_IDLE_TMO);
> + pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.OPNRJT_RTRY_INTVL 0x%08x\n",
> + SASConfigPage.OPNRJT_RTRY_INTVL);
> + pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO 0x%08x\n",
> + SASConfigPage.Data_Cmd_OPNRJT_RTRY_TMO);
> + pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR 0x%08x\n",
> + SASConfigPage.Data_Cmd_OPNRJT_RTRY_THR);
> + pm8001_dbg(pm8001_ha, INIT, "SASConfigPage.MAX_AIP 0x%08x\n",
> + SASConfigPage.MAX_AIP);
>
> memcpy(&payload.cfg_pg, &SASConfigPage,
> sizeof(SASProtocolTimerConfig_t));
> @@ -1347,18 +1318,18 @@ pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha)
> SCRATCH_PAD3_SMB_ENABLED)
> pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
> pm8001_ha->encrypt_info.status = 0;
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
> - "Encryption: SCRATCH_PAD3_ENC_READY 0x%08X."
> - "Cipher mode 0x%x Sec mode 0x%x status 0x%x\n",
> - scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
> - pm8001_ha->encrypt_info.sec_mode,
> - pm8001_ha->encrypt_info.status));
> + pm8001_dbg(pm8001_ha, INIT,
> + "Encryption: SCRATCH_PAD3_ENC_READY 0x%08X.Cipher mode 0x%x Sec mode 0x%x status 0x%x\n",
> + scratch3_value,
> + pm8001_ha->encrypt_info.cipher_mode,
> + pm8001_ha->encrypt_info.sec_mode,
> + pm8001_ha->encrypt_info.status);
> ret = 0;
> } else if ((scratch3_value & SCRATCH_PAD3_ENC_READY) ==
> SCRATCH_PAD3_ENC_DISABLED) {
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
> - "Encryption: SCRATCH_PAD3_ENC_DISABLED 0x%08X\n",
> - scratch3_value));
> + pm8001_dbg(pm8001_ha, INIT,
> + "Encryption: SCRATCH_PAD3_ENC_DISABLED 0x%08X\n",
> + scratch3_value);
> pm8001_ha->encrypt_info.status = 0xFFFFFFFF;
> pm8001_ha->encrypt_info.cipher_mode = 0;
> pm8001_ha->encrypt_info.sec_mode = 0;
> @@ -1378,12 +1349,12 @@ pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha)
> if ((scratch3_value & SCRATCH_PAD3_SM_MASK) ==
> SCRATCH_PAD3_SMB_ENABLED)
> pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
> - "Encryption: SCRATCH_PAD3_DIS_ERR 0x%08X."
> - "Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
> - scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
> - pm8001_ha->encrypt_info.sec_mode,
> - pm8001_ha->encrypt_info.status));
> + pm8001_dbg(pm8001_ha, INIT,
> + "Encryption: SCRATCH_PAD3_DIS_ERR 0x%08X.Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
> + scratch3_value,
> + pm8001_ha->encrypt_info.cipher_mode,
> + pm8001_ha->encrypt_info.sec_mode,
> + pm8001_ha->encrypt_info.status);
> } else if ((scratch3_value & SCRATCH_PAD3_ENC_MASK) ==
> SCRATCH_PAD3_ENC_ENA_ERR) {
>
> @@ -1401,12 +1372,12 @@ pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha)
> SCRATCH_PAD3_SMB_ENABLED)
> pm8001_ha->encrypt_info.sec_mode = SEC_MODE_SMB;
>
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
> - "Encryption: SCRATCH_PAD3_ENA_ERR 0x%08X."
> - "Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
> - scratch3_value, pm8001_ha->encrypt_info.cipher_mode,
> - pm8001_ha->encrypt_info.sec_mode,
> - pm8001_ha->encrypt_info.status));
> + pm8001_dbg(pm8001_ha, INIT,
> + "Encryption: SCRATCH_PAD3_ENA_ERR 0x%08X.Cipher mode 0x%x sec mode 0x%x status 0x%x\n",
> + scratch3_value,
> + pm8001_ha->encrypt_info.cipher_mode,
> + pm8001_ha->encrypt_info.sec_mode,
> + pm8001_ha->encrypt_info.status);
> }
> return ret;
> }
> @@ -1436,9 +1407,9 @@ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
> payload.new_curidx_ksop = ((1 << 24) | (1 << 16) | (1 << 8) |
> KEK_MGMT_SUBOP_KEYCARDUPDATE);
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "Saving Encryption info to flash. payload 0x%x\n",
> - payload.new_curidx_ksop));
> + pm8001_dbg(pm8001_ha, DEV,
> + "Saving Encryption info to flash. payload 0x%x\n",
> + payload.new_curidx_ksop);
>
> rc = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &payload,
> sizeof(payload), 0);
> @@ -1459,8 +1430,7 @@ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
>
> /* check the firmware status */
> if (-1 == check_fw_ready(pm8001_ha)) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Firmware is not ready!\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Firmware is not ready!\n");
> return -EBUSY;
> }
>
> @@ -1484,8 +1454,7 @@ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
> }
> /* notify firmware update finished and check initialization status */
> if (0 == mpi_init_check(pm8001_ha)) {
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("MPI initialize successful!\n"));
> + pm8001_dbg(pm8001_ha, INIT, "MPI initialize successful!\n");
> } else
> return -EBUSY;
>
> @@ -1494,16 +1463,13 @@ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
>
> /* Check for encryption */
> if (pm8001_ha->chip->encrypt) {
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Checking for encryption\n"));
> + pm8001_dbg(pm8001_ha, INIT, "Checking for encryption\n");
> ret = pm80xx_get_encrypt_info(pm8001_ha);
> if (ret == -1) {
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("Encryption error !!\n"));
> + pm8001_dbg(pm8001_ha, INIT, "Encryption error !!\n");
> if (pm8001_ha->encrypt_info.status == 0x81) {
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk(
> - "Encryption enabled with error."
> - "Saving encryption key to flash\n"));
> + pm8001_dbg(pm8001_ha, INIT,
> + "Encryption enabled with error.Saving encryption key to flash\n");
> pm80xx_encrypt_update(pm8001_ha);
> }
> }
> @@ -1534,8 +1500,7 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
> } while ((value != 0) && (--max_wait_count));
>
> if (!max_wait_count) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("TIMEOUT:IBDB value/=%x\n", value));
> + pm8001_dbg(pm8001_ha, FAIL, "TIMEOUT:IBDB value/=%x\n", value);
> return -1;
> }
>
> @@ -1552,9 +1517,8 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
> break;
> } while (--max_wait_count);
> if (!max_wait_count) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk(" TIME OUT MPI State = 0x%x\n",
> - gst_len_mpistate & GST_MPI_STATE_MASK));
> + pm8001_dbg(pm8001_ha, FAIL, " TIME OUT MPI State = 0x%x\n",
> + gst_len_mpistate & GST_MPI_STATE_MASK);
> return -1;
> }
>
> @@ -1582,9 +1546,9 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> u32 r1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
> u32 r2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
> u32 r3 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "MPI state is not ready scratch: %x:%x:%x:%x\n",
> - r0, r1, r2, r3));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "MPI state is not ready scratch: %x:%x:%x:%x\n",
> + r0, r1, r2, r3);
> /* if things aren't ready but the bootloader is ok then
> * try the reset anyway.
> */
> @@ -1594,25 +1558,25 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> }
> /* checked for reset register normal state; 0x0 */
> regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("reset register before write : 0x%x\n", regval));
> + pm8001_dbg(pm8001_ha, INIT, "reset register before write : 0x%x\n",
> + regval);
>
> pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, SPCv_NORMAL_RESET_VALUE);
> msleep(500);
>
> regval = pm8001_cr32(pm8001_ha, 0, SPC_REG_SOFT_RESET);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("reset register after write 0x%x\n", regval));
> + pm8001_dbg(pm8001_ha, INIT, "reset register after write 0x%x\n",
> + regval);
>
> if ((regval & SPCv_SOFT_RESET_READ_MASK) ==
> SPCv_SOFT_RESET_NORMAL_RESET_OCCURED) {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" soft reset successful [regval: 0x%x]\n",
> - regval));
> + pm8001_dbg(pm8001_ha, MSG,
> + " soft reset successful [regval: 0x%x]\n",
> + regval);
> } else {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" soft reset failed [regval: 0x%x]\n",
> - regval));
> + pm8001_dbg(pm8001_ha, MSG,
> + " soft reset failed [regval: 0x%x]\n",
> + regval);
>
> /* check bootloader is successfully executed or in HDA mode */
> bootloader_state =
> @@ -1620,28 +1584,27 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> SCRATCH_PAD1_BOOTSTATE_MASK;
>
> if (bootloader_state == SCRATCH_PAD1_BOOTSTATE_HDA_SEEPROM) {
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "Bootloader state - HDA mode SEEPROM\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "Bootloader state - HDA mode SEEPROM\n");
> } else if (bootloader_state ==
> SCRATCH_PAD1_BOOTSTATE_HDA_BOOTSTRAP) {
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "Bootloader state - HDA mode Bootstrap Pin\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "Bootloader state - HDA mode Bootstrap Pin\n");
> } else if (bootloader_state ==
> SCRATCH_PAD1_BOOTSTATE_HDA_SOFTRESET) {
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "Bootloader state - HDA mode soft reset\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "Bootloader state - HDA mode soft reset\n");
> } else if (bootloader_state ==
> SCRATCH_PAD1_BOOTSTATE_CRIT_ERROR) {
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "Bootloader state-HDA mode critical error\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "Bootloader state-HDA mode critical error\n");
> }
> return -EBUSY;
> }
>
> /* check the firmware status after reset */
> if (-1 == check_fw_ready(pm8001_ha)) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Firmware is not ready!\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Firmware is not ready!\n");
> /* check iButton feature support for motherboard controller */
> if (pm8001_ha->pdev->subsystem_vendor !=
> PCI_VENDOR_ID_ADAPTEC2 &&
> @@ -1653,21 +1616,18 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
> ibutton1 = pm8001_cr32(pm8001_ha, 0,
> MSGU_HOST_SCRATCH_PAD_7);
> if (!ibutton0 && !ibutton1) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("iButton Feature is"
> - " not Available!!!\n"));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "iButton Feature is not Available!!!\n");
> return -EBUSY;
> }
> if (ibutton0 == 0xdeadbeef && ibutton1 == 0xdeadbeef) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("CRC Check for iButton"
> - " Feature Failed!!!\n"));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "CRC Check for iButton Feature Failed!!!\n");
> return -EBUSY;
> }
> }
> }
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SPCv soft reset Complete\n"));
> + pm8001_dbg(pm8001_ha, INIT, "SPCv soft reset Complete\n");
> return 0;
> }
>
> @@ -1675,13 +1635,11 @@ static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
> {
> u32 i;
>
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("chip reset start\n"));
> + pm8001_dbg(pm8001_ha, INIT, "chip reset start\n");
>
> /* do SPCv chip reset. */
> pm8001_cw32(pm8001_ha, 0, SPC_REG_SOFT_RESET, 0x11);
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("SPC soft reset Complete\n"));
> + pm8001_dbg(pm8001_ha, INIT, "SPC soft reset Complete\n");
>
> /* Check this ..whether delay is required or no */
> /* delay 10 usec */
> @@ -1693,8 +1651,7 @@ static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
> mdelay(1);
> } while ((--i) != 0);
>
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("chip reset finished\n"));
> + pm8001_dbg(pm8001_ha, INIT, "chip reset finished\n");
> }
>
> /**
> @@ -1770,15 +1727,14 @@ static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
> int ret;
>
> if (!pm8001_ha_dev) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("dev is null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "dev is null\n");
> return;
> }
>
> task = sas_alloc_slow_task(GFP_ATOMIC);
>
> if (!task) {
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("cannot "
> - "allocate task\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task\n");
> return;
> }
>
> @@ -1804,8 +1760,7 @@ static void pm80xx_send_abort_all(struct pm8001_hba_info *pm8001_ha,
>
> ret = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort,
> sizeof(task_abort), 0);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Executing abort task end\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Executing abort task end\n");
> if (ret) {
> sas_free_task(task);
> pm8001_tag_free(pm8001_ha, ccb_tag);
> @@ -1828,8 +1783,7 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
> task = sas_alloc_slow_task(GFP_ATOMIC);
>
> if (!task) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("cannot allocate task !!!\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "cannot allocate task !!!\n");
> return;
> }
> task->task_done = pm8001_task_done;
> @@ -1837,8 +1791,7 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
> res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
> if (res) {
> sas_free_task(task);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("cannot allocate tag !!!\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "cannot allocate tag !!!\n");
> return;
> }
>
> @@ -1849,8 +1802,8 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
> if (!dev) {
> sas_free_task(task);
> pm8001_tag_free(pm8001_ha, ccb_tag);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Domain device cannot be allocated\n"));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Domain device cannot be allocated\n");
> return;
> }
>
> @@ -1883,7 +1836,7 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
>
> res = pm8001_mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd,
> sizeof(sata_cmd), 0);
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Executing read log end\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Executing read log end\n");
> if (res) {
> sas_free_task(task);
> pm8001_tag_free(pm8001_ha, ccb_tag);
> @@ -1929,27 +1882,24 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t = ccb->task;
>
> if (status && status != IO_UNDERFLOW)
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("sas IO status 0x%x\n", status));
> + pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", status);
> if (unlikely(!t || !t->lldd_task || !t->dev))
> return;
> ts = &t->task_status;
>
> - PM8001_DEV_DBG(pm8001_ha, pm8001_printk(
> - "tag::0x%x, status::0x%x task::0x%p\n", tag, status, t));
> + pm8001_dbg(pm8001_ha, DEV,
> + "tag::0x%x, status::0x%x task::0x%p\n", tag, status, t);
>
> /* Print sas address of IO failed device */
> if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
> (status != IO_UNDERFLOW))
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SAS Address of IO Failure Drive"
> - ":%016llx", SAS_ADDR(t->dev->sas_addr)));
> + pm8001_dbg(pm8001_ha, FAIL, "SAS Address of IO Failure Drive:%016llx\n",
> + SAS_ADDR(t->dev->sas_addr));
>
> switch (status) {
> case IO_SUCCESS:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_SUCCESS ,param = 0x%x\n",
> - param));
> + pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS ,param = 0x%x\n",
> + param);
> if (param == 0) {
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_GOOD;
> @@ -1964,8 +1914,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_ABORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_ABORTED IOMB Tag\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_ABORTED_TASK;
> if (pm8001_dev)
> @@ -1973,9 +1922,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> break;
> case IO_UNDERFLOW:
> /* SSP Completion with error */
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_UNDERFLOW ,param = 0x%x\n",
> - param));
> + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW ,param = 0x%x\n",
> + param);
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_UNDERRUN;
> ts->residual = param;
> @@ -1983,16 +1931,14 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_NO_DEVICE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_NO_DEVICE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_PHY_DOWN;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> /* Force the midlayer to retry */
> @@ -2001,8 +1947,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_PHY_NOT_READY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2010,8 +1955,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_INVALID_SSP_RSP_FRAME:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_INVALID_SSP_RSP_FRAME\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_INVALID_SSP_RSP_FRAME\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2019,8 +1964,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_EPROTO;
> @@ -2028,8 +1973,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> @@ -2037,8 +1982,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2051,8 +1995,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> @@ -2062,8 +2005,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
> break;
> case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_BAD_DEST;
> @@ -2071,8 +2014,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_CONN_RATE;
> @@ -2080,8 +2023,8 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
> @@ -2089,8 +2032,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_NAK_RECEIVED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2098,24 +2040,21 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_DMA:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_DMA\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_OPEN_RETRY_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2123,24 +2062,21 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_OFFSET_MISMATCH:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_PORT_IN_RESET:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_PORT_IN_RESET\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_DS_NON_OPERATIONAL:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> if (!t->uldd_task)
> @@ -2149,32 +2085,29 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> IO_DS_NON_OPERATIONAL);
> break;
> case IO_DS_IN_RECOVERY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_IN_RECOVERY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_TM_TAG_NOT_FOUND:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_TM_TAG_NOT_FOUND\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_SSP_EXT_IU_ZERO_LEN_ERROR\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2182,8 +2115,7 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown status 0x%x\n", status));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
> /* not allowed case. Therefore, return failed status */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> @@ -2191,19 +2123,17 @@ mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> }
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("scsi_status = 0x%x\n ",
> - psspPayload->ssp_resp_iu.status));
> + pm8001_dbg(pm8001_ha, IO, "scsi_status = 0x%x\n ",
> + psspPayload->ssp_resp_iu.status);
> spin_lock_irqsave(&t->task_state_lock, flags);
> t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
> t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "task 0x%p done with io_status 0x%x resp 0x%x "
> - "stat 0x%x but aborted by upper layer!\n",
> - t, status, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
> + t, status, ts->resp, ts->stat);
> if (t->slow_task)
> complete(&t->slow_task->completion);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> @@ -2233,17 +2163,15 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t = ccb->task;
> pm8001_dev = ccb->device;
> if (event)
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("sas IO status 0x%x\n", event));
> + pm8001_dbg(pm8001_ha, FAIL, "sas IO status 0x%x\n", event);
> if (unlikely(!t || !t->lldd_task || !t->dev))
> return;
> ts = &t->task_status;
> - PM8001_IOERR_DBG(pm8001_ha,
> - pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n",
> - port_id, tag, event));
> + pm8001_dbg(pm8001_ha, IOERR, "port_id:0x%x, tag:0x%x, event:0x%x\n",
> + port_id, tag, event);
> switch (event) {
> case IO_OVERFLOW:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
> + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> ts->residual = 0;
> @@ -2251,34 +2179,31 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
> pm8001_handle_event(pm8001_ha, t, IO_XFER_ERROR_BREAK);
> return;
> case IO_XFER_ERROR_PHY_NOT_READY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_EPROTO;
> break;
> case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> break;
> case IO_OPEN_CNX_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2289,8 +2214,7 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> @@ -2300,94 +2224,86 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
> break;
> case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_BAD_DEST;
> break;
> case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_CONN_RATE;
> break;
> case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
> break;
> case IO_XFER_ERROR_NAK_RECEIVED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> break;
> case IO_XFER_OPEN_RETRY_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
> pm8001_handle_event(pm8001_ha, t, IO_XFER_OPEN_RETRY_TIMEOUT);
> return;
> case IO_XFER_ERROR_UNEXPECTED_PHASE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_XFER_RDY_OVERRUN:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_OFFSET_MISMATCH:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
> - PM8001_IOERR_DBG(pm8001_ha,
> - pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
> + pm8001_dbg(pm8001_ha, IOERR,
> + "IO_XFR_ERROR_INTERNAL_CRC_ERROR\n");
> /* TBC: used default set values */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> break;
> case IO_XFER_CMD_FRAME_ISSUED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
> return;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown status 0x%x\n", event));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", event);
> /* not allowed case. Therefore, return failed status */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> @@ -2399,10 +2315,9 @@ static void mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "task 0x%p done with event 0x%x resp 0x%x "
> - "stat 0x%x but aborted by upper layer!\n",
> - t, event, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "task 0x%p done with event 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
> + t, event, ts->resp, ts->stat);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> } else {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> @@ -2437,8 +2352,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> tag = le32_to_cpu(psataPayload->tag);
>
> if (!tag) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("tag null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "tag null\n");
> return;
> }
> ccb = &pm8001_ha->ccb_info[tag];
> @@ -2447,8 +2361,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> t = ccb->task;
> pm8001_dev = ccb->device;
> } else {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("ccb null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "ccb null\n");
> return;
> }
>
> @@ -2456,29 +2369,26 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> if (t->dev && (t->dev->lldd_dev))
> pm8001_dev = t->dev->lldd_dev;
> } else {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "task null\n");
> return;
> }
>
> if ((pm8001_dev && !(pm8001_dev->id & NCQ_READ_LOG_FLAG))
> && unlikely(!t || !t->lldd_task || !t->dev)) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task or dev null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
> return;
> }
>
> ts = &t->task_status;
> if (!ts) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("ts null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "ts null\n");
> return;
> }
>
> if (unlikely(status))
> - PM8001_IOERR_DBG(pm8001_ha, pm8001_printk(
> - "status:0x%x, tag:0x%x, task::0x%p\n",
> - status, tag, t));
> + pm8001_dbg(pm8001_ha, IOERR,
> + "status:0x%x, tag:0x%x, task::0x%p\n",
> + status, tag, t);
>
> /* Print sas address of IO failed device */
> if ((status != IO_SUCCESS) && (status != IO_OVERFLOW) &&
> @@ -2510,20 +2420,20 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> & 0xff000000)) +
> pm8001_dev->attached_phy +
> 0x10);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SAS Address of IO Failure Drive:"
> - "%08x%08x", temp_sata_addr_hi,
> - temp_sata_addr_low));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "SAS Address of IO Failure Drive:%08x%08x\n",
> + temp_sata_addr_hi,
> + temp_sata_addr_low);
>
> } else {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SAS Address of IO Failure Drive:"
> - "%016llx", SAS_ADDR(t->dev->sas_addr)));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "SAS Address of IO Failure Drive:%016llx\n",
> + SAS_ADDR(t->dev->sas_addr));
> }
> }
> switch (status) {
> case IO_SUCCESS:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
> if (param == 0) {
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_GOOD;
> @@ -2545,39 +2455,38 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_PROTO_RESPONSE;
> ts->residual = param;
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
> - param));
> + pm8001_dbg(pm8001_ha, IO,
> + "SAS_PROTO_RESPONSE len = %d\n",
> + param);
> sata_resp = &psataPayload->sata_resp[0];
> resp = (struct ata_task_resp *)ts->buf;
> if (t->ata_task.dma_xfer == 0 &&
> t->data_dir == DMA_FROM_DEVICE) {
> len = sizeof(struct pio_setup_fis);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("PIO read len = %d\n", len));
> + pm8001_dbg(pm8001_ha, IO,
> + "PIO read len = %d\n", len);
> } else if (t->ata_task.use_ncq) {
> len = sizeof(struct set_dev_bits_fis);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("FPDMA len = %d\n", len));
> + pm8001_dbg(pm8001_ha, IO, "FPDMA len = %d\n",
> + len);
> } else {
> len = sizeof(struct dev_to_host_fis);
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("other len = %d\n", len));
> + pm8001_dbg(pm8001_ha, IO, "other len = %d\n",
> + len);
> }
> if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
> resp->frame_len = len;
> memcpy(&resp->ending_fis[0], sata_resp, len);
> ts->buf_valid_size = sizeof(*resp);
> } else
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("response too large\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "response too large\n");
> }
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_ABORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_ABORTED IOMB Tag\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB Tag\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_ABORTED_TASK;
> if (pm8001_dev)
> @@ -2586,8 +2495,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> /* following cases are to do cases */
> case IO_UNDERFLOW:
> /* SATA Completion with error */
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_UNDERFLOW param = %d\n", param));
> + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW param = %d\n", param);
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_UNDERRUN;
> ts->residual = param;
> @@ -2595,24 +2503,21 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_NO_DEVICE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_NO_DEVICE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_PHY_DOWN;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_INTERRUPTED;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_PHY_NOT_READY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2620,8 +2525,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_EPROTO;
> @@ -2629,8 +2534,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> @@ -2638,8 +2543,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
> @@ -2652,8 +2556,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (!t->uldd_task) {
> @@ -2667,8 +2570,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_BAD_DEST;
> @@ -2683,8 +2586,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_CONN_RATE;
> @@ -2692,8 +2595,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (!t->uldd_task) {
> @@ -2707,8 +2610,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
> @@ -2716,64 +2619,56 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_NAK_RECEIVED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_ACK_NAK_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_DMA:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_DMA\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_DMA\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_ABORTED_TASK;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_SATA_LINK_TIMEOUT\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_REJECTED_NCQ_MODE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_UNDERRUN;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_OPEN_RETRY_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_PORT_IN_RESET:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_PORT_IN_RESET\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_DS_NON_OPERATIONAL:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (!t->uldd_task) {
> @@ -2786,16 +2681,14 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case IO_DS_IN_RECOVERY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_IN_RECOVERY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_DS_IN_ERROR:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_IN_ERROR\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_ERROR\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (!t->uldd_task) {
> @@ -2808,8 +2701,8 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> @@ -2817,8 +2710,7 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown status 0x%x\n", status));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
> /* not allowed case. Therefore, return failed status */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> @@ -2832,10 +2724,9 @@ mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task 0x%p done with io_status 0x%x"
> - " resp 0x%x stat 0x%x but aborted by upper layer!\n",
> - t, status, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
> + t, status, ts->resp, ts->stat);
> if (t->slow_task)
> complete(&t->slow_task->completion);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> @@ -2866,13 +2757,11 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t = ccb->task;
> pm8001_dev = ccb->device;
> } else {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("No CCB !!!. returning\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "No CCB !!!. returning\n");
> return;
> }
> if (event)
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("SATA EVENT 0x%x\n", event));
> + pm8001_dbg(pm8001_ha, FAIL, "SATA EVENT 0x%x\n", event);
>
> /* Check if this is NCQ error */
> if (event == IO_XFER_ERROR_ABORTED_NCQ_MODE) {
> @@ -2885,18 +2774,16 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> }
>
> if (unlikely(!t || !t->lldd_task || !t->dev)) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task or dev null\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "task or dev null\n");
> return;
> }
>
> ts = &t->task_status;
> - PM8001_IOERR_DBG(pm8001_ha,
> - pm8001_printk("port_id:0x%x, tag:0x%x, event:0x%x\n",
> - port_id, tag, event));
> + pm8001_dbg(pm8001_ha, IOERR, "port_id:0x%x, tag:0x%x, event:0x%x\n",
> + port_id, tag, event);
> switch (event) {
> case IO_OVERFLOW:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> ts->residual = 0;
> @@ -2904,35 +2791,32 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_XFER_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_INTERRUPTED;
> break;
> case IO_XFER_ERROR_PHY_NOT_READY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_EPROTO;
> break;
> case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> break;
> case IO_OPEN_CNX_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
> @@ -2943,8 +2827,8 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_DEV_NO_RESPONSE;
> if (!t->uldd_task) {
> @@ -2958,107 +2842,96 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> }
> break;
> case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
> ts->resp = SAS_TASK_UNDELIVERED;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_BAD_DEST;
> break;
> case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_CONN_RATE;
> break;
> case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
> break;
> case IO_XFER_ERROR_NAK_RECEIVED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_NAK_RECEIVED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> break;
> case IO_XFER_ERROR_PEER_ABORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PEER_ABORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_NAK_R_ERR;
> break;
> case IO_XFER_ERROR_REJECTED_NCQ_MODE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_REJECTED_NCQ_MODE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_UNDERRUN;
> break;
> case IO_XFER_OPEN_RETRY_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_UNEXPECTED_PHASE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_UNEXPECTED_PHASE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_XFER_RDY_OVERRUN:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_XFER_RDY_OVERRUN\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_OFFSET_MISMATCH:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_OFFSET_MISMATCH\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_CMD_FRAME_ISSUED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_CMD_FRAME_ISSUED\n");
> break;
> case IO_XFER_PIO_SETUP_ERROR:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_PIO_SETUP_ERROR\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_ERROR_INTERNAL_CRC_ERROR:
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("IO_XFR_ERROR_INTERNAL_CRC_ERROR\n"));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "IO_XFR_ERROR_INTERNAL_CRC_ERROR\n");
> /* TBC: used default set values */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> case IO_XFER_DMA_ACTIVATE_TIMEOUT:
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("IO_XFR_DMA_ACTIVATE_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "IO_XFR_DMA_ACTIVATE_TIMEOUT\n");
> /* TBC: used default set values */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> break;
> default:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("Unknown status 0x%x\n", event));
> + pm8001_dbg(pm8001_ha, IO, "Unknown status 0x%x\n", event);
> /* not allowed case. Therefore, return failed status */
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_TO;
> @@ -3070,10 +2943,9 @@ static void mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task 0x%p done with io_status 0x%x"
> - " resp 0x%x stat 0x%x but aborted by upper layer!\n",
> - t, event, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "task 0x%p done with io_status 0x%x resp 0x%x stat 0x%x but aborted by upper layer!\n",
> + t, event, ts->resp, ts->stat);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> } else {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> @@ -3106,48 +2978,45 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> ts = &t->task_status;
> pm8001_dev = ccb->device;
> if (status)
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("smp IO status 0x%x\n", status));
> + pm8001_dbg(pm8001_ha, FAIL, "smp IO status 0x%x\n", status);
> if (unlikely(!t || !t->lldd_task || !t->dev))
> return;
>
> - PM8001_DEV_DBG(pm8001_ha,
> - pm8001_printk("tag::0x%x status::0x%x\n", tag, status));
> + pm8001_dbg(pm8001_ha, DEV, "tag::0x%x status::0x%x\n", tag, status);
>
> switch (status) {
>
> case IO_SUCCESS:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_SUCCESS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_GOOD;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("DIRECT RESPONSE Length:%d\n",
> - param));
> + pm8001_dbg(pm8001_ha, IO,
> + "DIRECT RESPONSE Length:%d\n",
> + param);
> pdma_respaddr = (char *)(phys_to_virt(cpu_to_le64
> ((u64)sg_dma_address
> (&t->smp_task.smp_resp))));
> for (i = 0; i < param; i++) {
> *(pdma_respaddr+i) = psmpPayload->_r_a[i];
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "SMP Byte%d DMA data 0x%x psmp 0x%x\n",
> - i, *(pdma_respaddr+i),
> - psmpPayload->_r_a[i]));
> + pm8001_dbg(pm8001_ha, IO,
> + "SMP Byte%d DMA data 0x%x psmp 0x%x\n",
> + i, *(pdma_respaddr + i),
> + psmpPayload->_r_a[i]);
> }
> }
> break;
> case IO_ABORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_ABORTED IOMB\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_ABORTED IOMB\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_ABORTED_TASK;
> if (pm8001_dev)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_OVERFLOW:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_UNDERFLOW\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DATA_OVERRUN;
> ts->residual = 0;
> @@ -3155,45 +3024,41 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> atomic_dec(&pm8001_dev->running_req);
> break;
> case IO_NO_DEVICE:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_NO_DEVICE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_PHY_DOWN;
> break;
> case IO_ERROR_HW_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_ERROR_HW_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_BUSY;
> break;
> case IO_XFER_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_BUSY;
> break;
> case IO_XFER_ERROR_PHY_NOT_READY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_PHY_NOT_READY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAM_STAT_BUSY;
> break;
> case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> break;
> case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> break;
> case IO_OPEN_CNX_ERROR_BREAK:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_BREAK\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
> @@ -3204,8 +3069,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_NO_DEST:
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_OPEN_COLLIDE:
> case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS_PATHWAY_BLOCKED:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_UNKNOWN;
> @@ -3214,75 +3078,68 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
> break;
> case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_BAD_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_BAD_DEST;
> break;
> case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(\
> - "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_CONN_RATE;
> break;
> case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
> break;
> case IO_XFER_ERROR_RX_FRAME:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_ERROR_RX_FRAME\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> break;
> case IO_XFER_OPEN_RETRY_TIMEOUT:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_XFER_OPEN_RETRY_TIMEOUT\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_ERROR_INTERNAL_SMP_RESOURCE:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_ERROR_INTERNAL_SMP_RESOURCE\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_QUEUE_FULL;
> break;
> case IO_PORT_IN_RESET:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_PORT_IN_RESET\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_PORT_IN_RESET\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_DS_NON_OPERATIONAL:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_NON_OPERATIONAL\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> break;
> case IO_DS_IN_RECOVERY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_DS_IN_RECOVERY\n"));
> + pm8001_dbg(pm8001_ha, IO, "IO_DS_IN_RECOVERY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
> + pm8001_dbg(pm8001_ha, IO,
> + "IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n");
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_OPEN_REJECT;
> ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown status 0x%x\n", status));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown status 0x%x\n", status);
> ts->resp = SAS_TASK_COMPLETE;
> ts->stat = SAS_DEV_NO_RESPONSE;
> /* not allowed case. Therefore, return failed status */
> @@ -3294,10 +3151,9 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
> t->task_state_flags |= SAS_TASK_STATE_DONE;
> if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "task 0x%p done with io_status 0x%x resp 0x%x"
> - "stat 0x%x but aborted by upper layer!\n",
> - t, status, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "task 0x%p done with io_status 0x%x resp 0x%xstat 0x%x but aborted by upper layer!\n",
> + t, status, ts->resp, ts->stat);
> pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
> } else {
> spin_unlock_irqrestore(&t->task_state_lock, flags);
> @@ -3394,38 +3250,34 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
> port->port_state = portstate;
> port->wide_port_phymap |= (1U << phy_id);
> phy->phy_state = PHY_STATE_LINK_UP_SPCV;
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "portid:%d; phyid:%d; linkrate:%d; "
> - "portstate:%x; devicetype:%x\n",
> - port_id, phy_id, link_rate, portstate, deviceType));
> + pm8001_dbg(pm8001_ha, MSG,
> + "portid:%d; phyid:%d; linkrate:%d; portstate:%x; devicetype:%x\n",
> + port_id, phy_id, link_rate, portstate, deviceType);
>
> switch (deviceType) {
> case SAS_PHY_UNUSED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("device type no device.\n"));
> + pm8001_dbg(pm8001_ha, MSG, "device type no device.\n");
> break;
> case SAS_END_DEVICE:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
> + pm8001_dbg(pm8001_ha, MSG, "end device.\n");
> pm80xx_chip_phy_ctl_req(pm8001_ha, phy_id,
> PHY_NOTIFY_ENABLE_SPINUP);
> port->port_attached = 1;
> pm8001_get_lrate_mode(phy, link_rate);
> break;
> case SAS_EDGE_EXPANDER_DEVICE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("expander device.\n"));
> + pm8001_dbg(pm8001_ha, MSG, "expander device.\n");
> port->port_attached = 1;
> pm8001_get_lrate_mode(phy, link_rate);
> break;
> case SAS_FANOUT_EXPANDER_DEVICE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("fanout expander device.\n"));
> + pm8001_dbg(pm8001_ha, MSG, "fanout expander device.\n");
> port->port_attached = 1;
> pm8001_get_lrate_mode(phy, link_rate);
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("unknown device type(%x)\n", deviceType));
> + pm8001_dbg(pm8001_ha, DEVIO, "unknown device type(%x)\n",
> + deviceType);
> break;
> }
> phy->phy_type |= PORT_TYPE_SAS;
> @@ -3473,9 +3325,9 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
> struct sas_ha_struct *sas_ha = pm8001_ha->sas;
> struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
> unsigned long flags;
> - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
> - "port id %d, phy id %d link_rate %d portstate 0x%x\n",
> - port_id, phy_id, link_rate, portstate));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + "port id %d, phy id %d link_rate %d portstate 0x%x\n",
> + port_id, phy_id, link_rate, portstate);
>
> port->port_state = portstate;
> phy->phy_state = PHY_STATE_LINK_UP_SPCV;
> @@ -3525,10 +3377,10 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
> case PORT_VALID:
> break;
> case PORT_INVALID:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" PortInvalid portID %d\n", port_id));
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" Last phy Down and port invalid\n"));
> + pm8001_dbg(pm8001_ha, MSG, " PortInvalid portID %d\n",
> + port_id);
> + pm8001_dbg(pm8001_ha, MSG,
> + " Last phy Down and port invalid\n");
> if (port_sata) {
> phy->phy_type = 0;
> port->port_attached = 0;
> @@ -3538,19 +3390,18 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
> sas_phy_disconnected(&phy->sas_phy);
> break;
> case PORT_IN_RESET:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" Port In Reset portID %d\n", port_id));
> + pm8001_dbg(pm8001_ha, MSG, " Port In Reset portID %d\n",
> + port_id);
> break;
> case PORT_NOT_ESTABLISHED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" Phy Down and PORT_NOT_ESTABLISHED\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + " Phy Down and PORT_NOT_ESTABLISHED\n");
> port->port_attached = 0;
> break;
> case PORT_LOSTCOMM:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" Phy Down and PORT_LOSTCOMM\n"));
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" Last phy Down and port invalid\n"));
> + pm8001_dbg(pm8001_ha, MSG, " Phy Down and PORT_LOSTCOMM\n");
> + pm8001_dbg(pm8001_ha, MSG,
> + " Last phy Down and port invalid\n");
> if (port_sata) {
> port->port_attached = 0;
> phy->phy_type = 0;
> @@ -3561,9 +3412,9 @@ hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
> break;
> default:
> port->port_attached = 0;
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk(" Phy Down and(default) = 0x%x\n",
> - portstate));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + " Phy Down and(default) = 0x%x\n",
> + portstate);
> break;
>
> }
> @@ -3584,9 +3435,9 @@ static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> le32_to_cpu(pPayload->phyid);
> struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
>
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("phy start resp status:0x%x, phyid:0x%x\n",
> - status, phy_id));
> + pm8001_dbg(pm8001_ha, INIT,
> + "phy start resp status:0x%x, phyid:0x%x\n",
> + status, phy_id);
> if (status == 0) {
> phy->phy_state = PHY_LINK_DOWN;
> if (pm8001_ha->flags == PM8001F_RUN_TIME &&
> @@ -3613,18 +3464,18 @@ static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
> u32 rht_lht = le32_to_cpu(pPayload->rht_lht);
>
> if (thermal_event & 0x40) {
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "Thermal Event: Local high temperature violated!\n"));
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "Thermal Event: Measured local high temperature %d\n",
> - ((rht_lht & 0xFF00) >> 8)));
> + pm8001_dbg(pm8001_ha, IO,
> + "Thermal Event: Local high temperature violated!\n");
> + pm8001_dbg(pm8001_ha, IO,
> + "Thermal Event: Measured local high temperature %d\n",
> + ((rht_lht & 0xFF00) >> 8));
> }
> if (thermal_event & 0x10) {
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "Thermal Event: Remote high temperature violated!\n"));
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "Thermal Event: Measured remote high temperature %d\n",
> - ((rht_lht & 0xFF000000) >> 24)));
> + pm8001_dbg(pm8001_ha, IO,
> + "Thermal Event: Remote high temperature violated!\n");
> + pm8001_dbg(pm8001_ha, IO,
> + "Thermal Event: Measured remote high temperature %d\n",
> + ((rht_lht & 0xFF000000) >> 24));
> }
> return 0;
> }
> @@ -3653,42 +3504,36 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
> struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
> struct pm8001_port *port = &pm8001_ha->port[port_id];
> struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
> - PM8001_DEV_DBG(pm8001_ha,
> - pm8001_printk("portid:%d phyid:%d event:0x%x status:0x%x\n",
> - port_id, phy_id, eventType, status));
> + pm8001_dbg(pm8001_ha, DEV,
> + "portid:%d phyid:%d event:0x%x status:0x%x\n",
> + port_id, phy_id, eventType, status);
>
> switch (eventType) {
>
> case HW_EVENT_SAS_PHY_UP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PHY_START_STATUS\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_START_STATUS\n");
> hw_event_sas_phy_up(pm8001_ha, piomb);
> break;
> case HW_EVENT_SATA_PHY_UP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_SATA_PHY_UP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_PHY_UP\n");
> hw_event_sata_phy_up(pm8001_ha, piomb);
> break;
> case HW_EVENT_SATA_SPINUP_HOLD:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_SATA_SPINUP_HOLD\n");
> sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
> break;
> case HW_EVENT_PHY_DOWN:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PHY_DOWN\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_DOWN\n");
> hw_event_phy_down(pm8001_ha, piomb);
> if (pm8001_ha->reset_in_progress) {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("Reset in progress\n"));
> + pm8001_dbg(pm8001_ha, MSG, "Reset in progress\n");
> return 0;
> }
> phy->phy_attached = 0;
> phy->phy_state = PHY_LINK_DISABLE;
> break;
> case HW_EVENT_PORT_INVALID:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PORT_INVALID\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_INVALID\n");
> sas_phy_disconnected(sas_phy);
> phy->phy_attached = 0;
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> @@ -3696,8 +3541,7 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
> /* the broadcast change primitive received, tell the LIBSAS this event
> to revalidate the sas domain*/
> case HW_EVENT_BROADCAST_CHANGE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_CHANGE\n");
> pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
> port_id, phy_id, 1, 0);
> spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
> @@ -3706,81 +3550,74 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
> sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
> break;
> case HW_EVENT_PHY_ERROR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PHY_ERROR\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PHY_ERROR\n");
> sas_phy_disconnected(&phy->sas_phy);
> phy->phy_attached = 0;
> sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
> break;
> case HW_EVENT_BROADCAST_EXP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_EXP\n");
> spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
> sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
> spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
> sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
> break;
> case HW_EVENT_LINK_ERR_INVALID_DWORD:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_LINK_ERR_INVALID_DWORD\n");
> pm80xx_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
> break;
> case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_LINK_ERR_DISPARITY_ERROR\n");
> pm80xx_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_LINK_ERR_DISPARITY_ERROR,
> port_id, phy_id, 0, 0);
> break;
> case HW_EVENT_LINK_ERR_CODE_VIOLATION:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_LINK_ERR_CODE_VIOLATION\n");
> pm80xx_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_LINK_ERR_CODE_VIOLATION,
> port_id, phy_id, 0, 0);
> break;
> case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n");
> pm80xx_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
> port_id, phy_id, 0, 0);
> break;
> case HW_EVENT_MALFUNCTION:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_MALFUNCTION\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_MALFUNCTION\n");
> break;
> case HW_EVENT_BROADCAST_SES:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_BROADCAST_SES\n");
> spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
> sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
> spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
> sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
> break;
> case HW_EVENT_INBOUND_CRC_ERROR:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_INBOUND_CRC_ERROR\n");
> pm80xx_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_INBOUND_CRC_ERROR,
> port_id, phy_id, 0, 0);
> break;
> case HW_EVENT_HARD_RESET_RECEIVED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_HARD_RESET_RECEIVED\n");
> sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
> break;
> case HW_EVENT_ID_FRAME_TIMEOUT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_ID_FRAME_TIMEOUT\n");
> sas_phy_disconnected(sas_phy);
> phy->phy_attached = 0;
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> break;
> case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_LINK_ERR_PHY_RESET_FAILED\n");
> pm80xx_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
> port_id, phy_id, 0, 0);
> @@ -3789,8 +3626,7 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
> sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
> break;
> case HW_EVENT_PORT_RESET_TIMER_TMO:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_TIMER_TMO\n");
> pm80xx_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
> port_id, phy_id, 0, 0);
> sas_phy_disconnected(sas_phy);
> @@ -3804,8 +3640,8 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "HW_EVENT_PORT_RECOVERY_TIMER_TMO\n");
> pm80xx_hw_event_ack_req(pm8001_ha, 0,
> HW_EVENT_PORT_RECOVERY_TIMER_TMO,
> port_id, phy_id, 0, 0);
> @@ -3819,13 +3655,11 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case HW_EVENT_PORT_RECOVER:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PORT_RECOVER\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RECOVER\n");
> hw_event_port_recover(pm8001_ha, piomb);
> break;
> case HW_EVENT_PORT_RESET_COMPLETE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "HW_EVENT_PORT_RESET_COMPLETE\n");
> if (pm8001_ha->phy[phy_id].reset_completion) {
> pm8001_ha->phy[phy_id].port_reset_status =
> PORT_RESET_SUCCESS;
> @@ -3834,12 +3668,11 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
> }
> break;
> case EVENT_BROADCAST_ASYNCH_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "EVENT_BROADCAST_ASYNCH_EVENT\n");
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha,
> - pm8001_printk("Unknown event type 0x%x\n", eventType));
> + pm8001_dbg(pm8001_ha, DEVIO, "Unknown event type 0x%x\n",
> + eventType);
> break;
> }
> return 0;
> @@ -3859,9 +3692,8 @@ static int mpi_phy_stop_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> u32 phyid =
> le32_to_cpu(pPayload->phyid) & 0xFF;
> struct pm8001_phy *phy = &pm8001_ha->phy[phyid];
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("phy:0x%x status:0x%x\n",
> - phyid, status));
> + pm8001_dbg(pm8001_ha, MSG, "phy:0x%x status:0x%x\n",
> + phyid, status);
> if (status == PHY_STOP_SUCCESS ||
> status == PHY_STOP_ERR_DEVICE_ATTACHED)
> phy->phy_state = PHY_LINK_DISABLE;
> @@ -3881,9 +3713,9 @@ static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
> u32 status = le32_to_cpu(pPayload->status);
> u32 err_qlfr_pgcd = le32_to_cpu(pPayload->err_qlfr_pgcd);
>
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n",
> - status, err_qlfr_pgcd));
> + pm8001_dbg(pm8001_ha, MSG,
> + "SET CONTROLLER RESP: status 0x%x qlfr_pgcd 0x%x\n",
> + status, err_qlfr_pgcd);
>
> return 0;
> }
> @@ -3896,8 +3728,7 @@ static int mpi_set_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
> static int mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
> void *piomb)
> {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" pm80xx_addition_functionality\n"));
> + pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
>
> return 0;
> }
> @@ -3910,8 +3741,7 @@ static int mpi_get_controller_config_resp(struct pm8001_hba_info *pm8001_ha,
> static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
> void *piomb)
> {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" pm80xx_addition_functionality\n"));
> + pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
>
> return 0;
> }
> @@ -3923,8 +3753,7 @@ static int mpi_get_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
> */
> static int mpi_flash_op_ext_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
> {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" pm80xx_addition_functionality\n"));
> + pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
>
> return 0;
> }
> @@ -3949,15 +3778,14 @@ static int mpi_set_phy_profile_resp(struct pm8001_hba_info *pm8001_ha,
> page_code = (u8)((ppc_phyid & 0xFF00) >> 8);
> if (status) {
> /* status is FAILED */
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("PhyProfile command failed with status "
> - "0x%08X \n", status));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "PhyProfile command failed with status 0x%08X\n",
> + status);
> rc = -1;
> } else {
> if (page_code != SAS_PHY_ANALOG_SETTINGS_PAGE) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("Invalid page code 0x%X\n",
> - page_code));
> + pm8001_dbg(pm8001_ha, FAIL, "Invalid page code 0x%X\n",
> + page_code);
> rc = -1;
> }
> }
> @@ -3979,9 +3807,9 @@ static int mpi_kek_management_resp(struct pm8001_hba_info *pm8001_ha,
> u32 kidx_new_curr_ksop = le32_to_cpu(pPayload->kidx_new_curr_ksop);
> u32 err_qlfr = le32_to_cpu(pPayload->err_qlfr);
>
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "KEK MGMT RESP. Status 0x%x idx_ksop 0x%x err_qlfr 0x%x\n",
> - status, kidx_new_curr_ksop, err_qlfr));
> + pm8001_dbg(pm8001_ha, MSG,
> + "KEK MGMT RESP. Status 0x%x idx_ksop 0x%x err_qlfr 0x%x\n",
> + status, kidx_new_curr_ksop, err_qlfr);
>
> return 0;
> }
> @@ -3994,8 +3822,7 @@ static int mpi_kek_management_resp(struct pm8001_hba_info *pm8001_ha,
> static int mpi_dek_management_resp(struct pm8001_hba_info *pm8001_ha,
> void *piomb)
> {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" pm80xx_addition_functionality\n"));
> + pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
>
> return 0;
> }
> @@ -4008,8 +3835,7 @@ static int mpi_dek_management_resp(struct pm8001_hba_info *pm8001_ha,
> static int ssp_coalesced_comp_resp(struct pm8001_hba_info *pm8001_ha,
> void *piomb)
> {
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk(" pm80xx_addition_functionality\n"));
> + pm8001_dbg(pm8001_ha, MSG, " pm80xx_addition_functionality\n");
>
> return 0;
> }
> @@ -4026,248 +3852,206 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
>
> switch (opc) {
> case OPC_OUB_ECHO:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_ECHO\n");
> break;
> case OPC_OUB_HW_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_HW_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_HW_EVENT\n");
> mpi_hw_event(pm8001_ha, piomb);
> break;
> case OPC_OUB_THERM_HW_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_THERMAL_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_THERMAL_EVENT\n");
> mpi_thermal_hw_event(pm8001_ha, piomb);
> break;
> case OPC_OUB_SSP_COMP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SSP_COMP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_COMP\n");
> mpi_ssp_completion(pm8001_ha, piomb);
> break;
> case OPC_OUB_SMP_COMP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SMP_COMP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_COMP\n");
> mpi_smp_completion(pm8001_ha, piomb);
> break;
> case OPC_OUB_LOCAL_PHY_CNTRL:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_LOCAL_PHY_CNTRL\n");
> pm8001_mpi_local_phy_ctl(pm8001_ha, piomb);
> break;
> case OPC_OUB_DEV_REGIST:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_DEV_REGIST\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_REGIST\n");
> pm8001_mpi_reg_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_DEREG_DEV:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("unregister the device\n"));
> + pm8001_dbg(pm8001_ha, MSG, "unregister the device\n");
> pm8001_mpi_dereg_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_GET_DEV_HANDLE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GET_DEV_HANDLE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEV_HANDLE\n");
> break;
> case OPC_OUB_SATA_COMP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SATA_COMP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_COMP\n");
> mpi_sata_completion(pm8001_ha, piomb);
> break;
> case OPC_OUB_SATA_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SATA_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_EVENT\n");
> mpi_sata_event(pm8001_ha, piomb);
> break;
> case OPC_OUB_SSP_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SSP_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_EVENT\n");
> mpi_ssp_event(pm8001_ha, piomb);
> break;
> case OPC_OUB_DEV_HANDLE_ARRIV:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEV_HANDLE_ARRIV\n");
> /*This is for target*/
> break;
> case OPC_OUB_SSP_RECV_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_RECV_EVENT\n");
> /*This is for target*/
> break;
> case OPC_OUB_FW_FLASH_UPDATE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_FW_FLASH_UPDATE\n");
> pm8001_mpi_fw_flash_update_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_GPIO_RESPONSE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_RESPONSE\n");
> break;
> case OPC_OUB_GPIO_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GPIO_EVENT\n");
> break;
> case OPC_OUB_GENERAL_EVENT:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GENERAL_EVENT\n");
> pm8001_mpi_general_event(pm8001_ha, piomb);
> break;
> case OPC_OUB_SSP_ABORT_RSP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SSP_ABORT_RSP\n");
> pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_SATA_ABORT_RSP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SATA_ABORT_RSP\n");
> pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_SAS_DIAG_MODE_START_END:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_SAS_DIAG_MODE_START_END\n");
> break;
> case OPC_OUB_SAS_DIAG_EXECUTE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_DIAG_EXECUTE\n");
> break;
> case OPC_OUB_GET_TIME_STAMP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_TIME_STAMP\n");
> break;
> case OPC_OUB_SAS_HW_EVENT_ACK:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SAS_HW_EVENT_ACK\n");
> break;
> case OPC_OUB_PORT_CONTROL:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_PORT_CONTROL\n");
> break;
> case OPC_OUB_SMP_ABORT_RSP:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SMP_ABORT_RSP\n");
> pm8001_mpi_task_abort_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_GET_NVMD_DATA:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_NVMD_DATA\n");
> pm8001_mpi_get_nvmd_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_SET_NVMD_DATA:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_NVMD_DATA\n");
> pm8001_mpi_set_nvmd_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_DEVICE_HANDLE_REMOVAL:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_DEVICE_HANDLE_REMOVAL\n");
> break;
> case OPC_OUB_SET_DEVICE_STATE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEVICE_STATE\n");
> pm8001_mpi_set_dev_state_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_GET_DEVICE_STATE:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_GET_DEVICE_STATE\n");
> break;
> case OPC_OUB_SET_DEV_INFO:
> - PM8001_MSG_DBG(pm8001_ha,
> - pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
> + pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n");
> break;
> /* spcv specifc commands */
> case OPC_OUB_PHY_START_RESP:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "OPC_OUB_PHY_START_RESP opcode:%x\n", opc));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_PHY_START_RESP opcode:%x\n", opc);
> mpi_phy_start_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_PHY_STOP_RESP:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "OPC_OUB_PHY_STOP_RESP opcode:%x\n", opc));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_PHY_STOP_RESP opcode:%x\n", opc);
> mpi_phy_stop_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_SET_CONTROLLER_CONFIG:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "OPC_OUB_SET_CONTROLLER_CONFIG opcode:%x\n", opc));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_SET_CONTROLLER_CONFIG opcode:%x\n", opc);
> mpi_set_controller_config_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_GET_CONTROLLER_CONFIG:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "OPC_OUB_GET_CONTROLLER_CONFIG opcode:%x\n", opc));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_GET_CONTROLLER_CONFIG opcode:%x\n", opc);
> mpi_get_controller_config_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_GET_PHY_PROFILE:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "OPC_OUB_GET_PHY_PROFILE opcode:%x\n", opc));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_GET_PHY_PROFILE opcode:%x\n", opc);
> mpi_get_phy_profile_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_FLASH_OP_EXT:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "OPC_OUB_FLASH_OP_EXT opcode:%x\n", opc));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_FLASH_OP_EXT opcode:%x\n", opc);
> mpi_flash_op_ext_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_SET_PHY_PROFILE:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "OPC_OUB_SET_PHY_PROFILE opcode:%x\n", opc));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_SET_PHY_PROFILE opcode:%x\n", opc);
> mpi_set_phy_profile_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_KEK_MANAGEMENT_RESP:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "OPC_OUB_KEK_MANAGEMENT_RESP opcode:%x\n", opc));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_KEK_MANAGEMENT_RESP opcode:%x\n", opc);
> mpi_kek_management_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_DEK_MANAGEMENT_RESP:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "OPC_OUB_DEK_MANAGEMENT_RESP opcode:%x\n", opc));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_DEK_MANAGEMENT_RESP opcode:%x\n", opc);
> mpi_dek_management_resp(pm8001_ha, piomb);
> break;
> case OPC_OUB_SSP_COALESCED_COMP_RESP:
> - PM8001_MSG_DBG(pm8001_ha, pm8001_printk(
> - "OPC_OUB_SSP_COALESCED_COMP_RESP opcode:%x\n", opc));
> + pm8001_dbg(pm8001_ha, MSG,
> + "OPC_OUB_SSP_COALESCED_COMP_RESP opcode:%x\n", opc);
> ssp_coalesced_comp_resp(pm8001_ha, piomb);
> break;
> default:
> - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
> - "Unknown outbound Queue IOMB OPC = 0x%x\n", opc));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + "Unknown outbound Queue IOMB OPC = 0x%x\n", opc);
> break;
> }
> }
>
> static void print_scratchpad_registers(struct pm8001_hba_info *pm8001_ha)
> {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_SCRATCH_PAD_0: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_SCRATCH_PAD_1:0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_SCRATCH_PAD_2: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_SCRATCH_PAD_3: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_HOST_SCRATCH_PAD_0: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_HOST_SCRATCH_PAD_1: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_1)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_HOST_SCRATCH_PAD_2: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_2)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_HOST_SCRATCH_PAD_3: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_3)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_HOST_SCRATCH_PAD_4: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_4)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_HOST_SCRATCH_PAD_5: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_5)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_RSVD_SCRATCH_PAD_0: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_6)));
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("MSGU_RSVD_SCRATCH_PAD_1: 0x%x\n",
> - pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_7)));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_0: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_1:0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_2: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_SCRATCH_PAD_3: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_0: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_1: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_1));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_2: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_2));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_3: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_3));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_4: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_4));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_HOST_SCRATCH_PAD_5: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_5));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_RSVD_SCRATCH_PAD_0: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_6));
> + pm8001_dbg(pm8001_ha, FAIL, "MSGU_RSVD_SCRATCH_PAD_1: 0x%x\n",
> + pm8001_cr32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_7));
> }
>
> static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
> @@ -4284,8 +4068,9 @@ static int process_oq(struct pm8001_hba_info *pm8001_ha, u8 vec)
> if ((regval & SCRATCH_PAD_MIPSALL_READY) !=
> SCRATCH_PAD_MIPSALL_READY) {
> pm8001_ha->controller_fatal_error = true;
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk(
> - "Firmware Fatal error! Regval:0x%x\n", regval));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "Firmware Fatal error! Regval:0x%x\n",
> + regval);
> print_scratchpad_registers(pm8001_ha);
> return ret;
> }
> @@ -4391,8 +4176,7 @@ static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
> smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
>
> length = sg_req->length;
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("SMP Frame Length %d\n", sg_req->length));
> + pm8001_dbg(pm8001_ha, IO, "SMP Frame Length %d\n", sg_req->length);
> if (!(length - 8))
> pm8001_ha->smp_exp_mode = SMP_DIRECT;
> else
> @@ -4404,8 +4188,7 @@ static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
>
> /* INDIRECT MODE command settings. Use DMA */
> if (pm8001_ha->smp_exp_mode == SMP_INDIRECT) {
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("SMP REQUEST INDIRECT MODE\n"));
> + pm8001_dbg(pm8001_ha, IO, "SMP REQUEST INDIRECT MODE\n");
> /* for SPCv indirect mode. Place the top 4 bytes of
> * SMP Request header here. */
> for (i = 0; i < 4; i++)
> @@ -4437,21 +4220,20 @@ static int pm80xx_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
> ((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
> }
> if (pm8001_ha->smp_exp_mode == SMP_DIRECT) {
> - PM8001_IO_DBG(pm8001_ha,
> - pm8001_printk("SMP REQUEST DIRECT MODE\n"));
> + pm8001_dbg(pm8001_ha, IO, "SMP REQUEST DIRECT MODE\n");
> for (i = 0; i < length; i++)
> if (i < 16) {
> smp_cmd.smp_req16[i] = *(preq_dma_addr+i);
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "Byte[%d]:%x (DMA data:%x)\n",
> - i, smp_cmd.smp_req16[i],
> - *(preq_dma_addr)));
> + pm8001_dbg(pm8001_ha, IO,
> + "Byte[%d]:%x (DMA data:%x)\n",
> + i, smp_cmd.smp_req16[i],
> + *(preq_dma_addr));
> } else {
> smp_cmd.smp_req[i] = *(preq_dma_addr+i);
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "Byte[%d]:%x (DMA data:%x)\n",
> - i, smp_cmd.smp_req[i],
> - *(preq_dma_addr)));
> + pm8001_dbg(pm8001_ha, IO,
> + "Byte[%d]:%x (DMA data:%x)\n",
> + i, smp_cmd.smp_req[i],
> + *(preq_dma_addr));
> }
> }
>
> @@ -4548,9 +4330,9 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> /* Check if encryption is set */
> if (pm8001_ha->chip->encrypt &&
> !(pm8001_ha->encrypt_info.status) && check_enc_sas_cmd(task)) {
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "Encryption enabled.Sending Encrypt SAS command 0x%x\n",
> - task->ssp_task.cmd->cmnd[0]));
> + pm8001_dbg(pm8001_ha, IO,
> + "Encryption enabled.Sending Encrypt SAS command 0x%x\n",
> + task->ssp_task.cmd->cmnd[0]);
> opc = OPC_INB_SSP_INI_DIF_ENC_IO;
> /* enable encryption. 0 for SAS 1.1 and SAS 2.0 compatible TLR*/
> ssp_cmd.dad_dir_m_tlr = cpu_to_le32
> @@ -4580,13 +4362,10 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
> end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
> if (end_addr_high != ssp_cmd.enc_addr_high) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("The sg list address "
> - "start_addr=0x%016llx data_len=0x%x "
> - "end_addr_high=0x%08x end_addr_low="
> - "0x%08x has crossed 4G boundary\n",
> - start_addr, ssp_cmd.enc_len,
> - end_addr_high, end_addr_low));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
> + start_addr, ssp_cmd.enc_len,
> + end_addr_high, end_addr_low);
> pm8001_chip_make_sg(task->scatter, 1,
> ccb->buf_prd);
> phys_addr = ccb->ccb_dma_handle;
> @@ -4610,9 +4389,9 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> (task->ssp_task.cmd->cmnd[4] << 8) |
> (task->ssp_task.cmd->cmnd[5]));
> } else {
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "Sending Normal SAS command 0x%x inb q %x\n",
> - task->ssp_task.cmd->cmnd[0], q_index));
> + pm8001_dbg(pm8001_ha, IO,
> + "Sending Normal SAS command 0x%x inb q %x\n",
> + task->ssp_task.cmd->cmnd[0], q_index);
> /* fill in PRD (scatter/gather) table, if any */
> if (task->num_scatter > 1) {
> pm8001_chip_make_sg(task->scatter, ccb->n_elem,
> @@ -4636,13 +4415,10 @@ static int pm80xx_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
> end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
> end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
> if (end_addr_high != ssp_cmd.addr_high) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("The sg list address "
> - "start_addr=0x%016llx data_len=0x%x "
> - "end_addr_high=0x%08x end_addr_low="
> - "0x%08x has crossed 4G boundary\n",
> - start_addr, ssp_cmd.len,
> - end_addr_high, end_addr_low));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
> + start_addr, ssp_cmd.len,
> + end_addr_high, end_addr_low);
> pm8001_chip_make_sg(task->scatter, 1,
> ccb->buf_prd);
> phys_addr = ccb->ccb_dma_handle;
> @@ -4689,19 +4465,19 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
>
> if (task->data_dir == DMA_NONE) {
> ATAP = 0x04; /* no data*/
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data\n"));
> + pm8001_dbg(pm8001_ha, IO, "no data\n");
> } else if (likely(!task->ata_task.device_control_reg_update)) {
> if (task->ata_task.dma_xfer) {
> ATAP = 0x06; /* DMA */
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA\n"));
> + pm8001_dbg(pm8001_ha, IO, "DMA\n");
> } else {
> ATAP = 0x05; /* PIO*/
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO\n"));
> + pm8001_dbg(pm8001_ha, IO, "PIO\n");
> }
> if (task->ata_task.use_ncq &&
> dev->sata_dev.class != ATA_DEV_ATAPI) {
> ATAP = 0x07; /* FPDMA */
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA\n"));
> + pm8001_dbg(pm8001_ha, IO, "FPDMA\n");
> }
> }
> if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag)) {
> @@ -4721,9 +4497,9 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> /* Check if encryption is set */
> if (pm8001_ha->chip->encrypt &&
> !(pm8001_ha->encrypt_info.status) && check_enc_sat_cmd(task)) {
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n",
> - sata_cmd.sata_fis.command));
> + pm8001_dbg(pm8001_ha, IO,
> + "Encryption enabled.Sending Encrypt SATA cmd 0x%x\n",
> + sata_cmd.sata_fis.command);
> opc = OPC_INB_SATA_DIF_ENC_IO;
>
> /* set encryption bit */
> @@ -4751,13 +4527,10 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
> end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
> if (end_addr_high != sata_cmd.enc_addr_high) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("The sg list address "
> - "start_addr=0x%016llx data_len=0x%x "
> - "end_addr_high=0x%08x end_addr_low"
> - "=0x%08x has crossed 4G boundary\n",
> - start_addr, sata_cmd.enc_len,
> - end_addr_high, end_addr_low));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "The sg list address start_addr=0x%016llx data_len=0x%x end_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
> + start_addr, sata_cmd.enc_len,
> + end_addr_high, end_addr_low);
> pm8001_chip_make_sg(task->scatter, 1,
> ccb->buf_prd);
> phys_addr = ccb->ccb_dma_handle;
> @@ -4786,9 +4559,9 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> cpu_to_le32((sata_cmd.sata_fis.lbah_exp << 8) |
> (sata_cmd.sata_fis.lbam_exp));
> } else {
> - PM8001_IO_DBG(pm8001_ha, pm8001_printk(
> - "Sending Normal SATA command 0x%x inb %x\n",
> - sata_cmd.sata_fis.command, q_index));
> + pm8001_dbg(pm8001_ha, IO,
> + "Sending Normal SATA command 0x%x inb %x\n",
> + sata_cmd.sata_fis.command, q_index);
> /* dad (bit 0-1) is 0 */
> sata_cmd.ncqtag_atap_dir_m_dad =
> cpu_to_le32(((ncg_tag & 0xff)<<16) |
> @@ -4814,13 +4587,10 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> end_addr_low = cpu_to_le32(lower_32_bits(end_addr));
> end_addr_high = cpu_to_le32(upper_32_bits(end_addr));
> if (end_addr_high != sata_cmd.addr_high) {
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("The sg list address "
> - "start_addr=0x%016llx data_len=0x%x"
> - "end_addr_high=0x%08x end_addr_low="
> - "0x%08x has crossed 4G boundary\n",
> - start_addr, sata_cmd.len,
> - end_addr_high, end_addr_low));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "The sg list address start_addr=0x%016llx data_len=0x%xend_addr_high=0x%08x end_addr_low=0x%08x has crossed 4G boundary\n",
> + start_addr, sata_cmd.len,
> + end_addr_high, end_addr_low);
> pm8001_chip_make_sg(task->scatter, 1,
> ccb->buf_prd);
> phys_addr = ccb->ccb_dma_handle;
> @@ -4879,10 +4649,10 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
> SAS_TASK_STATE_ABORTED))) {
> spin_unlock_irqrestore(&task->task_state_lock,
> flags);
> - PM8001_FAIL_DBG(pm8001_ha,
> - pm8001_printk("task 0x%p resp 0x%x "
> - " stat 0x%x but aborted by upper layer "
> - "\n", task, ts->resp, ts->stat));
> + pm8001_dbg(pm8001_ha, FAIL,
> + "task 0x%p resp 0x%x stat 0x%x but aborted by upper layer\n",
> + task, ts->resp,
> + ts->stat);
> pm8001_ccb_task_free(pm8001_ha, task, ccb, tag);
> return 0;
> } else {
> @@ -4917,8 +4687,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
> memset(&payload, 0, sizeof(payload));
> payload.tag = cpu_to_le32(tag);
>
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("PHY START REQ for phy_id %d\n", phy_id));
> + pm8001_dbg(pm8001_ha, INIT, "PHY START REQ for phy_id %d\n", phy_id);
>
> payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
> LINKMODE_AUTO | pm8001_ha->link_rate | phy_id);
> @@ -5082,9 +4851,9 @@ static irqreturn_t
> pm80xx_chip_isr(struct pm8001_hba_info *pm8001_ha, u8 vec)
> {
> pm80xx_chip_interrupt_disable(pm8001_ha, vec);
> - PM8001_DEVIO_DBG(pm8001_ha, pm8001_printk(
> - "irq vec %d, ODMR:0x%x\n",
> - vec, pm8001_cr32(pm8001_ha, 0, 0x30)));
> + pm8001_dbg(pm8001_ha, DEVIO,
> + "irq vec %d, ODMR:0x%x\n",
> + vec, pm8001_cr32(pm8001_ha, 0, 0x30));
> process_oq(pm8001_ha, vec);
> pm80xx_chip_interrupt_enable(pm8001_ha, vec);
> return IRQ_HANDLED;
> @@ -5103,13 +4872,13 @@ static void mpi_set_phy_profile_req(struct pm8001_hba_info *pm8001_ha,
> memset(&payload, 0, sizeof(payload));
> rc = pm8001_tag_alloc(pm8001_ha, &tag);
> if (rc)
> - PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("Invalid tag\n"));
> + pm8001_dbg(pm8001_ha, FAIL, "Invalid tag\n");
> circularQ = &pm8001_ha->inbnd_q_tbl[0];
> payload.tag = cpu_to_le32(tag);
> payload.ppc_phyid = (((operation & 0xF) << 8) | (phyid & 0xFF));
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk(" phy profile command for phy %x ,length is %d\n",
> - payload.ppc_phyid, length));
> + pm8001_dbg(pm8001_ha, INIT,
> + " phy profile command for phy %x ,length is %d\n",
> + payload.ppc_phyid, length);
> for (i = length; i < (length + PHY_DWORD_LENGTH - 1); i++) {
> payload.reserved[j] = cpu_to_le32(*((u32 *)buf + i));
> j++;
> @@ -5130,7 +4899,7 @@ void pm8001_set_phy_profile(struct pm8001_hba_info *pm8001_ha,
> SAS_PHY_ANALOG_SETTINGS_PAGE, i, length, (u32 *)buf);
> length = length + PHY_DWORD_LENGTH;
> }
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk("phy settings completed\n"));
> + pm8001_dbg(pm8001_ha, INIT, "phy settings completed\n");
> }
>
> void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
> @@ -5145,7 +4914,7 @@ void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
>
> rc = pm8001_tag_alloc(pm8001_ha, &tag);
> if (rc)
> - PM8001_INIT_DBG(pm8001_ha, pm8001_printk("Invalid tag"));
> + pm8001_dbg(pm8001_ha, INIT, "Invalid tag\n");
>
> circularQ = &pm8001_ha->inbnd_q_tbl[0];
> opc = OPC_INB_SET_PHY_PROFILE;
> @@ -5162,8 +4931,7 @@ void pm8001_set_phy_profile_single(struct pm8001_hba_info *pm8001_ha,
> if (rc)
> pm8001_tag_free(pm8001_ha, tag);
>
> - PM8001_INIT_DBG(pm8001_ha,
> - pm8001_printk("PHY %d settings applied", phy));
> + pm8001_dbg(pm8001_ha, INIT, "PHY %d settings applied\n", phy);
> }
> const struct pm8001_dispatch pm8001_80xx_dispatch = {
> .name = "pmc80xx",
> --
> 2.26.0
>
Powered by blists - more mailing lists