| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1606154073-28267-1-git-send-email-stefanc@marvell.com>
Date: Mon, 23 Nov 2020 19:54:33 +0200
From: <stefanc@...vell.com>
To: <netdev@...r.kernel.org>
CC: <thomas.petazzoni@...tlin.com>, <davem@...emloft.net>,
<nadavh@...vell.com>, <ymarkman@...vell.com>,
<linux-kernel@...r.kernel.org>, <stefanc@...vell.com>,
<kuba@...nel.org>, <linux@...linux.org.uk>, <mw@...ihalf.com>,
<andrew@...n.ch>, <rmk+kernel@...linux.org.uk>
Subject: [PATCH v2] net: mvpp2: divide fifo for dts-active ports only
From: Stefan Chulski <stefanc@...vell.com>
Tx/Rx FIFO is a HW resource limited by total size, but shared
by all ports of same CP110 and impacting port-performance.
Do not divide the FIFO for ports which are not enabled in DTS,
so active ports could have more FIFO.
No change in FIFO allocation if all 3 ports on the communication
processor enabled in DTS.
The active port mapping should be done in probe before FIFO-init.
Signed-off-by: Stefan Chulski <stefanc@...vell.com>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 23 +++--
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 129 +++++++++++++++++-------
2 files changed, 108 insertions(+), 44 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 8347758..6bd7e40 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -695,6 +695,9 @@
/* Maximum number of supported ports */
#define MVPP2_MAX_PORTS 4
+/* Loopback port index */
+#define MVPP2_LOOPBACK_PORT_INDEX 3
+
/* Maximum number of TXQs used by single port */
#define MVPP2_MAX_TXQ 8
@@ -729,22 +732,21 @@
#define MVPP2_TX_DESC_ALIGN (MVPP2_DESC_ALIGNED_SIZE - 1)
/* RX FIFO constants */
+#define MVPP2_RX_FIFO_PORT_DATA_SIZE_44KB 0xb000
#define MVPP2_RX_FIFO_PORT_DATA_SIZE_32KB 0x8000
#define MVPP2_RX_FIFO_PORT_DATA_SIZE_8KB 0x2000
#define MVPP2_RX_FIFO_PORT_DATA_SIZE_4KB 0x1000
-#define MVPP2_RX_FIFO_PORT_ATTR_SIZE_32KB 0x200
-#define MVPP2_RX_FIFO_PORT_ATTR_SIZE_8KB 0x80
+#define MVPP2_RX_FIFO_PORT_ATTR_SIZE(data_size) ((data_size) >> 6)
#define MVPP2_RX_FIFO_PORT_ATTR_SIZE_4KB 0x40
#define MVPP2_RX_FIFO_PORT_MIN_PKT 0x80
/* TX FIFO constants */
-#define MVPP22_TX_FIFO_DATA_SIZE_10KB 0xa
-#define MVPP22_TX_FIFO_DATA_SIZE_3KB 0x3
-#define MVPP2_TX_FIFO_THRESHOLD_MIN 256
-#define MVPP2_TX_FIFO_THRESHOLD_10KB \
- (MVPP22_TX_FIFO_DATA_SIZE_10KB * 1024 - MVPP2_TX_FIFO_THRESHOLD_MIN)
-#define MVPP2_TX_FIFO_THRESHOLD_3KB \
- (MVPP22_TX_FIFO_DATA_SIZE_3KB * 1024 - MVPP2_TX_FIFO_THRESHOLD_MIN)
+#define MVPP22_TX_FIFO_DATA_SIZE_16KB 16
+#define MVPP22_TX_FIFO_DATA_SIZE_10KB 10
+#define MVPP22_TX_FIFO_DATA_SIZE_3KB 3
+#define MVPP2_TX_FIFO_THRESHOLD_MIN 256 /* Bytes */
+#define MVPP2_TX_FIFO_THRESHOLD(kb) \
+ ((kb) * 1024 - MVPP2_TX_FIFO_THRESHOLD_MIN)
/* RX buffer constants */
#define MVPP2_SKB_SHINFO_SIZE \
@@ -946,6 +948,9 @@ struct mvpp2 {
/* List of pointers to port structures */
int port_count;
struct mvpp2_port *port_list[MVPP2_MAX_PORTS];
+ /* Map of enabled ports */
+ unsigned long port_map;
+
struct mvpp2_tai *tai;
/* Number of Tx threads used */
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index f6616c8..08c237a 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6601,32 +6601,56 @@ static void mvpp2_rx_fifo_init(struct mvpp2 *priv)
mvpp2_write(priv, MVPP2_RX_FIFO_INIT_REG, 0x1);
}
-static void mvpp22_rx_fifo_init(struct mvpp2 *priv)
+static void mvpp22_rx_fifo_set_hw(struct mvpp2 *priv, int port, int data_size)
{
- int port;
+ int attr_size = MVPP2_RX_FIFO_PORT_ATTR_SIZE(data_size);
- /* The FIFO size parameters are set depending on the maximum speed a
- * given port can handle:
- * - Port 0: 10Gbps
- * - Port 1: 2.5Gbps
- * - Ports 2 and 3: 1Gbps
- */
+ mvpp2_write(priv, MVPP2_RX_DATA_FIFO_SIZE_REG(port), data_size);
+ mvpp2_write(priv, MVPP2_RX_ATTR_FIFO_SIZE_REG(port), attr_size);
+}
- mvpp2_write(priv, MVPP2_RX_DATA_FIFO_SIZE_REG(0),
- MVPP2_RX_FIFO_PORT_DATA_SIZE_32KB);
- mvpp2_write(priv, MVPP2_RX_ATTR_FIFO_SIZE_REG(0),
- MVPP2_RX_FIFO_PORT_ATTR_SIZE_32KB);
+/* Initialize TX FIFO's: the total FIFO size is 48kB on PPv2.2.
+ * 4kB fixed space must be assigned for the loopback port.
+ * Redistribute remaining avialable 44kB space among all active ports.
+ * Guarantee minimum 32kB for 10G port and 8kB for port 1, capable of 2.5G
+ * SGMII link.
+ */
+static void mvpp22_rx_fifo_init(struct mvpp2 *priv)
+{
+ int remaining_ports_count;
+ unsigned long port_map;
+ int size_remainder;
+ int port, size;
+
+ /* The loopback requires fixed 4kB of the FIFO space assignment. */
+ mvpp22_rx_fifo_set_hw(priv, MVPP2_LOOPBACK_PORT_INDEX,
+ MVPP2_RX_FIFO_PORT_DATA_SIZE_4KB);
+ port_map = priv->port_map & ~BIT(MVPP2_LOOPBACK_PORT_INDEX);
+
+ /* Set RX FIFO size to 0 for inactive ports. */
+ for_each_clear_bit(port, &port_map, MVPP2_LOOPBACK_PORT_INDEX)
+ mvpp22_rx_fifo_set_hw(priv, port, 0);
+
+ /* Assign remaining RX FIFO space among all active ports. */
+ size_remainder = MVPP2_RX_FIFO_PORT_DATA_SIZE_44KB;
+ remaining_ports_count = hweight_long(port_map);
+
+ for_each_set_bit(port, &port_map, MVPP2_LOOPBACK_PORT_INDEX) {
+ if (remaining_ports_count == 1)
+ size = size_remainder;
+ else if (port == 0)
+ size = max(size_remainder / remaining_ports_count,
+ MVPP2_RX_FIFO_PORT_DATA_SIZE_32KB);
+ else if (port == 1)
+ size = max(size_remainder / remaining_ports_count,
+ MVPP2_RX_FIFO_PORT_DATA_SIZE_8KB);
+ else
+ size = size_remainder / remaining_ports_count;
- mvpp2_write(priv, MVPP2_RX_DATA_FIFO_SIZE_REG(1),
- MVPP2_RX_FIFO_PORT_DATA_SIZE_8KB);
- mvpp2_write(priv, MVPP2_RX_ATTR_FIFO_SIZE_REG(1),
- MVPP2_RX_FIFO_PORT_ATTR_SIZE_8KB);
+ size_remainder -= size;
+ remaining_ports_count--;
- for (port = 2; port < MVPP2_MAX_PORTS; port++) {
- mvpp2_write(priv, MVPP2_RX_DATA_FIFO_SIZE_REG(port),
- MVPP2_RX_FIFO_PORT_DATA_SIZE_4KB);
- mvpp2_write(priv, MVPP2_RX_ATTR_FIFO_SIZE_REG(port),
- MVPP2_RX_FIFO_PORT_ATTR_SIZE_4KB);
+ mvpp22_rx_fifo_set_hw(priv, port, size);
}
mvpp2_write(priv, MVPP2_RX_MIN_PKT_SIZE_REG,
@@ -6634,24 +6658,53 @@ static void mvpp22_rx_fifo_init(struct mvpp2 *priv)
mvpp2_write(priv, MVPP2_RX_FIFO_INIT_REG, 0x1);
}
-/* Initialize Tx FIFO's: the total FIFO size is 19kB on PPv2.2 and 10G
- * interfaces must have a Tx FIFO size of 10kB. As only port 0 can do 10G,
- * configure its Tx FIFO size to 10kB and the others ports Tx FIFO size to 3kB.
+static void mvpp22_tx_fifo_set_hw(struct mvpp2 *priv, int port, int size)
+{
+ int threshold = MVPP2_TX_FIFO_THRESHOLD(size);
+
+ mvpp2_write(priv, MVPP22_TX_FIFO_SIZE_REG(port), size);
+ mvpp2_write(priv, MVPP22_TX_FIFO_THRESH_REG(port), threshold);
+}
+
+/* Initialize TX FIFO's: the total FIFO size is 19kB on PPv2.2.
+ * 3kB fixed space must be assigned for the loopback port.
+ * Redistribute remaining avialable 16kB space among all active ports.
+ * The 10G interface should use 10kB (which is maximum possible size
+ * per single port).
*/
static void mvpp22_tx_fifo_init(struct mvpp2 *priv)
{
- int port, size, thrs;
-
- for (port = 0; port < MVPP2_MAX_PORTS; port++) {
- if (port == 0) {
+ int remaining_ports_count;
+ unsigned long port_map;
+ int size_remainder;
+ int port, size;
+
+ /* The loopback requires fixed 3kB of the FIFO space assignment. */
+ mvpp22_tx_fifo_set_hw(priv, MVPP2_LOOPBACK_PORT_INDEX,
+ MVPP22_TX_FIFO_DATA_SIZE_3KB);
+ port_map = priv->port_map & ~BIT(MVPP2_LOOPBACK_PORT_INDEX);
+
+ /* Set TX FIFO size to 0 for inactive ports. */
+ for_each_clear_bit(port, &port_map, MVPP2_LOOPBACK_PORT_INDEX)
+ mvpp22_tx_fifo_set_hw(priv, port, 0);
+
+ /* Assign remaining TX FIFO space among all active ports. */
+ size_remainder = MVPP22_TX_FIFO_DATA_SIZE_16KB;
+ remaining_ports_count = hweight_long(port_map);
+
+ for_each_set_bit(port, &port_map, MVPP2_LOOPBACK_PORT_INDEX) {
+ if (remaining_ports_count == 1)
+ size = min(size_remainder,
+ MVPP22_TX_FIFO_DATA_SIZE_10KB);
+ else if (port == 0)
size = MVPP22_TX_FIFO_DATA_SIZE_10KB;
- thrs = MVPP2_TX_FIFO_THRESHOLD_10KB;
- } else {
- size = MVPP22_TX_FIFO_DATA_SIZE_3KB;
- thrs = MVPP2_TX_FIFO_THRESHOLD_3KB;
- }
- mvpp2_write(priv, MVPP22_TX_FIFO_SIZE_REG(port), size);
- mvpp2_write(priv, MVPP22_TX_FIFO_THRESH_REG(port), thrs);
+ else
+ size = size_remainder / remaining_ports_count;
+
+ size_remainder -= size;
+ remaining_ports_count--;
+
+ mvpp22_tx_fifo_set_hw(priv, port, size);
}
}
@@ -6952,6 +7005,12 @@ static int mvpp2_probe(struct platform_device *pdev)
goto err_axi_clk;
}
+ /* Map DTS-active ports. Should be done before FIFO mvpp2_init */
+ fwnode_for_each_available_child_node(fwnode, port_fwnode) {
+ if (!fwnode_property_read_u32(port_fwnode, "port-id", &i))
+ priv->port_map |= BIT(i);
+ }
+
/* Initialize network controller */
err = mvpp2_init(pdev, priv);
if (err < 0) {
--
1.9.1
Powered by blists - more mailing lists