[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201123090114.12641-2-amelie.delaunay@st.com>
Date: Mon, 23 Nov 2020 10:01:12 +0100
From: Amelie Delaunay <amelie.delaunay@...com>
To: Minas Harutyunyan <hminas@...opsys.com>,
Felipe Balbi <balbi@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Fabrice Gasnier <fabrice.gasnier@...com>,
Amelie Delaunay <amelie.delaunay@...com>
Subject: [PATCH 1/3] usb: dwc2: set ahbcfg parameter for STM32MP15 OTG HS and FS
STM32MP15 ahbcfg register default value sets Burst length/type (HBSTLEN)
to Single (32-bit accesses on AHB), which is not recommended, according
to STM32MP157 Reference manual [1].
This patch sets Burst length/type (HBSTLEN) so that bus transactions
target 16x32 bit accesses. This improves OTG controller performance.
[1] https://www.st.com/resource/en/reference_manual/dm00327659.pdf, p.3149
Signed-off-by: Amelie Delaunay <amelie.delaunay@...com>
---
drivers/usb/dwc2/params.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 267543c3dc38..0df693319f0a 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -177,6 +177,7 @@ static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg)
p->i2c_enable = false;
p->activate_stm_fs_transceiver = true;
p->activate_stm_id_vb_detection = true;
+ p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
}
@@ -189,6 +190,7 @@ static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
p->host_rx_fifo_size = 440;
p->host_nperio_tx_fifo_size = 256;
p->host_perio_tx_fifo_size = 256;
+ p->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
}
--
2.17.1
Powered by blists - more mailing lists