| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5FBBAA71.3090101@huawei.com>
Date: Mon, 23 Nov 2020 20:26:25 +0800
From: Xiaofei Tan <tanxiaofei@...wei.com>
To: <james.morse@....com>, <rafael@...nel.org>, <rjw@...ysocki.net>,
<lenb@...nel.org>, <tony.luck@...el.com>, <bp@...en8.de>,
<akpm@...ux-foundation.org>, <jroedel@...e.de>,
<peterz@...radead.org>
CC: <linux-acpi@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linuxarm@...wei.com>
Subject: Re: [PATCH v4] ACPI / APEI: do memory failure on the physical address
reported by ARM processor error section
Hi James，
Please help to review this new version, thank you very much.
On 2020/10/28 17:37, Xiaofei Tan wrote:
> After the commit 8fcc4ae6faf8 ("arm64: acpi: Make apei_claim_sea()
> synchronise with APEI's irq work") applied, do_sea() return directly
> for user-mode if apei_claim_sea() handled any error record. Therefore,
> each error record reported by the user-mode SEA must be effectively
> processed in APEI GHES driver.
>
> Currently, GHES driver only processes Memory Error Section.(Ignore PCIe
> Error Section, as it has nothing to do with SEA). It is not enough.
> Because ARM Processor Error could also be used for SEA in some hardware
> platforms, such as Kunpeng9xx series. We can't ask them to switch to
> use Memory Error Section for two reasons:
> 1)The server was delivered to customers, and it will introduce
> compatibility issue.
> 2)It make sense to use ARM Processor Error Section. Because either
> cache or memory errors could generate SEA when consumed by a processor.
>
> Do memory failure handling for ARM Processor Error Section just like
> for Memory Error Section.
>
> Signed-off-by: Xiaofei Tan <tanxiaofei@...wei.com>
> ---
> Changes since v3:
> - Print unhandled error following James Morse's advice.
>
> Changes since v2:
> - Updated commit log
> ---
> drivers/acpi/apei/ghes.c | 70 ++++++++++++++++++++++++++++++++++++------------
> 1 file changed, 53 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
> index 99df00f..b9cbd33 100644
> --- a/drivers/acpi/apei/ghes.c
> +++ b/drivers/acpi/apei/ghes.c
> @@ -441,28 +441,35 @@ static void ghes_kick_task_work(struct callback_head *head)
> gen_pool_free(ghes_estatus_pool, (unsigned long)estatus_node, node_len);
> }
>
> -static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata,
> - int sev)
> +static bool ghes_do_memory_failure(u64 physical_addr, int flags)
> {
> unsigned long pfn;
> - int flags = -1;
> - int sec_sev = ghes_severity(gdata->error_severity);
> - struct cper_sec_mem_err *mem_err = acpi_hest_get_payload(gdata);
>
> if (!IS_ENABLED(CONFIG_ACPI_APEI_MEMORY_FAILURE))
> return false;
>
> - if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
> - return false;
> -
> - pfn = mem_err->physical_addr >> PAGE_SHIFT;
> + pfn = PHYS_PFN(physical_addr);
> if (!pfn_valid(pfn)) {
> pr_warn_ratelimited(FW_WARN GHES_PFX
> "Invalid address in generic error data: %#llx\n",
> - mem_err->physical_addr);
> + physical_addr);
> return false;
> }
>
> + memory_failure_queue(pfn, flags);
> + return true;
> +}
> +
> +static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata,
> + int sev)
> +{
> + int flags = -1;
> + int sec_sev = ghes_severity(gdata->error_severity);
> + struct cper_sec_mem_err *mem_err = acpi_hest_get_payload(gdata);
> +
> + if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
> + return false;
> +
> /* iff following two events can be handled properly by now */
> if (sec_sev == GHES_SEV_CORRECTED &&
> (gdata->flags & CPER_SEC_ERROR_THRESHOLD_EXCEEDED))
> @@ -470,14 +477,45 @@ static bool ghes_handle_memory_failure(struct acpi_hest_generic_data *gdata,
> if (sev == GHES_SEV_RECOVERABLE && sec_sev == GHES_SEV_RECOVERABLE)
> flags = 0;
>
> - if (flags != -1) {
> - memory_failure_queue(pfn, flags);
> - return true;
> - }
> + if (flags != -1)
> + return ghes_do_memory_failure(mem_err->physical_addr, flags);
>
> return false;
> }
>
> +static bool ghes_handle_arm_hw_error(struct acpi_hest_generic_data *gdata, int sev)
> +{
> + struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata);
> + struct cper_arm_err_info *err_info;
> + bool queued = false;
> + int sec_sev, i;
> +
> + log_arm_hw_error(err);
> +
> + sec_sev = ghes_severity(gdata->error_severity);
> + if (sev != GHES_SEV_RECOVERABLE || sec_sev != GHES_SEV_RECOVERABLE)
> + return false;
> +
> + err_info = (struct cper_arm_err_info *) (err + 1);
> + for (i = 0; i < err->err_info_num; i++, err_info++) {
> + bool is_cache = (err_info->type == CPER_ARM_CACHE_ERROR);
> + bool has_pa = (err_info->validation_bits & CPER_ARM_INFO_VALID_PHYSICAL_ADDR);
> +
> + if (!is_cache || !has_pa) {
> + pr_warn_ratelimited(FW_WARN GHES_PFX
> + "Unhandled processor error type %s\n",
> + err_info->type < ARRAY_SIZE(cper_proc_error_type_strs) ?
> + cper_proc_error_type_strs[err_info->type] : "unknown error");
> + continue;
> + }
> +
> + if (ghes_do_memory_failure(err_info->physical_fault_addr, 0))
> + queued = true;
> + }
> +
> + return queued;
> +}
> +
> /*
> * PCIe AER errors need to be sent to the AER driver for reporting and
> * recovery. The GHES severities map to the following AER severities and
> @@ -605,9 +643,7 @@ static bool ghes_do_proc(struct ghes *ghes,
> ghes_handle_aer(gdata);
> }
> else if (guid_equal(sec_type, &CPER_SEC_PROC_ARM)) {
> - struct cper_sec_proc_arm *err = acpi_hest_get_payload(gdata);
> -
> - log_arm_hw_error(err);
> + queued = ghes_handle_arm_hw_error(gdata, sev);
> } else {
> void *err = acpi_hest_get_payload(gdata);
>
>
--
thanks
tanxiaofei
Powered by blists - more mailing lists