[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201124093828.307709-1-colin.king@canonical.com>
Date: Tue, 24 Nov 2020 09:38:28 +0000
From: Colin King <colin.king@...onical.com>
To: Jack Wang <jinpu.wang@...ud.ionos.com>,
"James E . J . Bottomley" <jejb@...ux.ibm.com>,
"Martin K . Petersen" <martin.petersen@...cle.com>,
linux-scsi@...r.kernel.org
Cc: kernel-janitors@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH][next] scsi: pm8001: remove space in a debug message
From: Colin Ian King <colin.king@...onical.com>
There are two words that need separating with a space in a
pm8001_dbg message. Fix it.
Signed-off-by: Colin Ian King <colin.king@...onical.com>
---
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 08d6cc9b50db..c8d4d87c5473 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1031,7 +1031,7 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
pm8001_dbg(pm8001_ha, INIT,
- "GSM 0x700048 - Write Data Parity Check Enableis set to = 0x%x\n",
+ "GSM 0x700048 - Write Data Parity Check Enable is set to = 0x%x\n",
pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK));
/* step 13: bring the IOP and AAP1 out of reset */
--
2.29.2
Powered by blists - more mailing lists