[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd070] [ 0.000000] Linux version 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 (elver@elver.muc.corp.google.com) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #25 SMP PREEMPT Tue Nov 24 13:47:30 CET 2020 [ 0.000000] Machine model: linux,dummy-virt [ 0.000000] efi: UEFI not found. [ 0.000000] cma: Reserved 32 MiB at 0x00000000be000000 [ 0.000000] earlycon: pl11 at MMIO 0x0000000009000000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xbdbf6000-0xbdbf7fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff] [ 0.000000] On node 0 totalpages: 524288 [ 0.000000] DMA zone: 4096 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 262144 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 4096 pages used for memmap [ 0.000000] DMA32 zone: 262144 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv0.2 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS migration not required [ 0.000000] percpu: Embedded 49 pages/cpu s162704 r8192 d29808 u200704 [ 0.000000] pcpu-alloc: s162704 r8192 d29808 u200704 alloc=49*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 832075 [ 0.000000] CPU features: detected: ARM erratum 834220 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: Spectre-v4 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: console=ttyAMA0 root=/dev/sda debug earlycon earlyprintk=serial slub_debug=UZ slub_debug=- workqueue.watchdog_thresh=10 [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x000000007bfff000-0x000000007ffff000] (64MB) [ 0.000000] Memory: 1903696K/2097152K available (20800K kernel code, 4024K rwdata, 8508K rodata, 8896K init, 11238K bss, 160688K reserved, 32768K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 56178 entries in 220 pages [ 0.000000] ftrace: allocated 220 pages with 5 groups [ 0.000000] Running RCU self tests [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU lockdep checking is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv2m: range[mem 0x08020000-0x08020fff], SPI[80:143] [ 0.000000] random: get_random_bytes called from start_kernel+0x468/0x670 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 62.50MHz (virt). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1cd42e208c, max_idle_ns: 881590405314 ns [ 0.000291] sched_clock: 56 bits at 62MHz, resolution 16ns, wraps every 4398046511096ns [ 0.014280] Console: colour dummy device 80x25 [ 0.015796] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.016131] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.016378] ... MAX_LOCK_DEPTH: 48 [ 0.016626] ... MAX_LOCKDEP_KEYS: 8192 [ 0.016887] ... CLASSHASH_SIZE: 4096 [ 0.017138] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.017385] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.017633] ... CHAINHASH_SIZE: 32768 [ 0.017884] memory used by lock dependency info: 6365 kB [ 0.018144] memory used for stack traces: 4224 kB [ 0.018400] per task-struct memory footprint: 1920 bytes [ 0.021247] Calibrating delay loop (skipped), value calculated using timer frequency.. 125.00 BogoMIPS (lpj=250000) [ 0.021914] pid_max: default: 32768 minimum: 301 [ 0.025132] LSM: Security Framework initializing [ 0.027343] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.028580] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.115959] rcu: Hierarchical SRCU implementation. [ 0.135096] EFI services will not be available. [ 0.139828] smp: Bringing up secondary CPUs ... [ 0.140267] smp: Brought up 1 node, 1 CPU [ 0.140587] SMP: Total of 1 processors activated. [ 0.141037] CPU features: detected: 32-bit EL0 Support [ 0.141769] CPU features: detected: CRC32 instructions [ 0.142144] CPU features: detected: 32-bit EL1 Support [ 0.547379] CPU: All CPU(s) started at EL1 [ 0.548418] alternatives: patching kernel code [ 0.606936] devtmpfs: initialized [ 0.679006] KASLR enabled [ 0.707823] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.708867] futex hash table entries: 256 (order: 3, 32768 bytes, linear) [ 0.710674] Running postponed tracer tests: [ 0.714449] Testing tracer function: PASSED [ 8.629279] Testing dynamic ftrace: PASSED [ 9.591794] Testing dynamic ftrace ops #1: [ 12.266300] (1 0 1 0 0) [ 12.266797] (1 1 2 0 0) [ 20.579408] (2 1 3 0 1141111) [ 20.582238] (2 2 4 0 1141539) PASSED [ 24.613636] Testing dynamic ftrace ops #2: [ 34.951883] (1 0 1 1116153 0) [ 34.954384] (1 1 2 1116600 0) [ 35.023400] (2 1 3 1 3074) [ 35.024655] (2 2 4 200 3273) PASSED [ 38.154182] Testing ftrace recursion: PASSED [ 38.921470] Testing ftrace recursion safe: PASSED [ 39.687688] Testing ftrace regs: PASSED [ 40.462198] Testing tracer nop: PASSED [ 40.466389] Testing tracer irqsoff: PASSED [ 48.407206] Testing tracer preemptoff: PASSED [ 56.413646] Testing tracer preemptirqsoff: PASSED [ 64.506770] Testing tracer wakeup: PASSED [ 72.330196] Testing tracer wakeup_rt: PASSED [ 80.131803] Testing tracer wakeup_dl: PASSED [ 87.972631] Testing tracer function_graph: [ 91.178997] [ 91.184432] ============================= [ 91.188301] WARNING: suspicious RCU usage [ 91.192316] 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 Tainted: G W [ 91.197536] ----------------------------- [ 91.201431] kernel/trace/trace_preemptirq.c:78 RCU not watching trace_hardirqs_off()! [ 91.206546] [ 91.206546] other info that might help us debug this: [ 91.206546] [ 91.211790] [ 91.211790] rcu_scheduler_active = 2, debug_locks = 0 [ 91.216454] RCU used illegally from extended quiescent state! [ 91.220890] no locks held by swapper/0/0. [ 91.224712] [ 91.224712] stack backtrace: [ 91.228794] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 [ 91.234877] Hardware name: linux,dummy-virt (DT) [ 91.239032] Call trace: [ 91.242587] dump_backtrace+0x0/0x240 [ 91.246500] show_stack+0x34/0x88 [ 91.250295] dump_stack+0x140/0x1bc [ 91.254159] lockdep_rcu_suspicious+0xe4/0xf8 [ 91.258332] trace_hardirqs_off+0x214/0x330 [ 91.262462] trace_graph_return+0x1ac/0x1d8 [ 91.266564] ftrace_return_to_handler+0xa4/0x170 [ 91.270809] return_to_handler+0x1c/0x38 [ 91.274826] default_idle_call+0x94/0x38c [ 91.278869] do_idle+0x240/0x290 [ 91.282633] rest_init+0x1e8/0x2dc [ 91.286529] arch_call_rest_init+0x1c/0x28 [ 91.290585] start_kernel+0x638/0x670 [ 91.295524] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:5279 check_flags.part.0+0x1d4/0x1f8 [ 91.296302] Modules linked in: [ 91.297644] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 [ 91.298317] Hardware name: linux,dummy-virt (DT) [ 91.298975] pstate: 80000085 (Nzcv daIf -PAN -UAO -TCO BTYPE=--) [ 91.299648] pc : check_flags.part.0+0x1d4/0x1f8 [ 91.300303] lr : check_flags.part.0+0x1d4/0x1f8 [ 91.300960] sp : ffffdb60f8d73a50 [ 91.301628] x29: ffffdb60f8d73a50 x28: ffffdb60f8d84000 [ 91.303527] x27: ffffdb60f869cbb8 x26: ffffdb60f6835930 [ 91.305431] x25: 0000000000000000 x24: 0000000000000000 [ 91.307343] x23: ffffdb60f8daf360 x22: 0000000000000001 [ 91.309242] x21: 0000000000000000 x20: 0000000000000001 [ 91.311145] x19: ffffdb60f9bcf000 x18: 00000000749f6e65 [ 91.313044] x17: 00000000dcd3f761 x16: 0000000000000005 [ 91.314954] x15: 0000000000000000 x14: 0000000000000028 [ 91.316854] x13: 000000000000067a x12: 0000000000000028 [ 91.318753] x11: 0101010101010101 x10: ffffdb60f8d73820 [ 91.320657] x9 : ffffdb60f6960ff8 x8 : 4e5241575f534b43 [ 91.322582] x7 : 4f4c5f4755424544 x6 : ffff4454fdbd3667 [ 91.324486] x5 : 00000000ffffffc8 x4 : ffff4454fdbd2c60 [ 91.326413] x3 : ffffdb60f6800000 x2 : ffffdb60f7c60000 [ 91.328308] x1 : 1c0af7741e0f0c00 x0 : 0000000000000000 [ 91.330227] Call trace: [ 91.330880] check_flags.part.0+0x1d4/0x1f8 [ 91.331547] lock_acquire+0x208/0x508 [ 91.332200] _raw_spin_lock+0x5c/0x80 [ 91.332849] vprintk_emit+0xb4/0x380 [ 91.333528] vprintk_default+0x4c/0x60 [ 91.334189] vprintk_func+0x120/0x330 [ 91.334863] printk+0x78/0x9c [ 91.335523] lockdep_rcu_suspicious+0x2c/0xf8 [ 91.336195] trace_hardirqs_off+0x214/0x330 [ 91.336854] trace_graph_return+0x1ac/0x1d8 [ 91.337518] ftrace_return_to_handler+0xa4/0x170 [ 91.338190] return_to_handler+0x1c/0x38 [ 91.338841] default_idle_call+0x94/0x38c [ 91.339512] do_idle+0x240/0x290 [ 91.340166] rest_init+0x1e8/0x2dc [ 91.340840] arch_call_rest_init+0x1c/0x28 [ 91.341499] start_kernel+0x638/0x670 [ 91.342147] irq event stamp: 1727 [ 91.342832] hardirqs last enabled at (1727): [] exit_el1_irq_or_nmi+0x24/0x50 [ 91.343502] hardirqs last disabled at (1724): [] enter_el1_irq_or_nmi+0x20/0x30 [ 91.344193] softirqs last enabled at (1726): [] return_to_handler+0x0/0x38 [ 91.344866] softirqs last disabled at (1725): [] irq_enter_rcu+0x88/0xa8 [ 91.345546] ---[ end trace e131d25144579308 ]--- [ 91.346413] [ 91.347055] [ 91.347707] ============================= [ 91.348363] WARNING: suspicious RCU usage [ 91.349058] 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 Not tainted [ 91.349714] ----------------------------- [ 91.350398] include/trace/events/ipi.h:19 suspicious rcu_dereference_check() usage! [ 91.351025] [ 91.351702] other info that might help us debug this: [ 91.352324] [ 91.352949] [ 91.353626] rcu_scheduler_active = 2, debug_locks = 1 [ 91.354291] RCU used illegally from extended quiescent state! [ 91.354965] no locks held by swapper/0/0. [ 91.355590] [ 91.356257] stack backtrace: [ 91.356937] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 [ 91.357611] Hardware name: linux,dummy-virt (DT) [ 91.358270] Call trace: [ 91.358925] dump_backtrace+0x0/0x240 [ 91.359597] show_stack+0x34/0x88 [ 91.360255] dump_stack+0x140/0x1bc [ 91.360932] lockdep_rcu_suspicious+0xe4/0xf8 [ 91.361594] smp_cross_call+0x220/0x228 [ 91.362264] arch_irq_work_raise+0x40/0x50 [ 91.362925] __irq_work_queue_local+0xb0/0xe8 [ 91.363580] irq_work_queue+0x5c/0xb8 [ 91.364252] printk_safe_log_store+0x1a0/0x1d8 [ 91.364906] vprintk_func+0x23c/0x330 [ 91.365566] printk+0x78/0x9c [ 91.366215] lockdep_rcu_suspicious+0x2c/0xf8 [ 91.366883] lock_acquire+0x340/0x508 [ 91.367538] _raw_spin_lock+0x5c/0x80 [ 91.368192] vprintk_emit+0xb4/0x380 [ 91.368866] vprintk_default+0x4c/0x60 [ 91.369521] vprintk_func+0x120/0x330 [ 91.370191] printk+0x78/0x9c [ 91.370845] lockdep_rcu_suspicious+0x2c/0xf8 [ 91.371519] trace_hardirqs_off+0x214/0x330 [ 91.372172] trace_graph_return+0x1ac/0x1d8 [ 91.372842] ftrace_return_to_handler+0xa4/0x170 [ 91.373503] return_to_handler+0x1c/0x38 [ 91.374158] default_idle_call+0x94/0x38c [ 91.374825] do_idle+0x240/0x290 [ 91.375479] rest_init+0x1e8/0x2dc [ 91.376152] arch_call_rest_init+0x1c/0x28 [ 91.376804] start_kernel+0x638/0x670 [ 91.377475] ============================= [ 91.378132] WARNING: suspicious RCU usage [ 91.378793] 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 Not tainted [ 91.379466] ----------------------------- [ 91.380129] include/trace/events/lock.h:13 suspicious rcu_dereference_check() usage! [ 91.380769] [ 91.381432] other info that might help us debug this: [ 91.382066] [ 91.382690] [ 91.383349] rcu_scheduler_active = 2, debug_locks = 1 [ 91.384023] RCU used illegally from extended quiescent state! [ 91.384675] no locks held by swapper/0/0. [ 91.385316] [ 91.385962] stack backtrace: [ 91.386647] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.0-rc4-next-20201119-00002-g51c2bf0ac853 #25 [ 91.387307] Hardware name: linux,dummy-virt (DT) [ 91.387956] Call trace: [ 91.388626] dump_backtrace+0x0/0x240 [ 91.389283] show_stack+0x34/0x88 [ 91.389952] dump_stack+0x140/0x1bc [ 91.390602] lockdep_rcu_suspicious+0xe4/0xf8 [ 91.391270] lock_acquire+0x340/0x508 [ 91.391926] _raw_spin_lock+0x5c/0x80 [ 91.392580] vprintk_emit+0xb4/0x380 [ 91.393259] vprintk_default+0x4c/0x60 [ 91.393913] vprintk_func+0x120/0x330 [ 91.394581] printk+0x78/0x9c [ 91.395230] lockdep_rcu_suspicious+0x2c/0xf8 [ 91.395899] trace_hardirqs_off+0x214/0x330 [ 91.396555] trace_graph_return+0x1ac/0x1d8 [ 91.397243] ftrace_return_to_handler+0xa4/0x170 [ 91.397901] return_to_handler+0x1c/0x38 [ 91.398556] default_idle_call+0x94/0x38c [ 91.399231] do_idle+0x240/0x290 [ 91.399883] rest_init+0x1e8/0x2dc [ 91.400562] arch_call_rest_init+0x1c/0x28 [ 91.401227] start_kernel+0x638/0x670 [ 91.401909] ------------[ cut here ]------------ [ 91.402584] DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled())possible reason: unannotated irqs-off. [ 91.403248] irq event stamp: 1727 [ 91.403939] hardirqs last enabled at (1727): [] exit_el1_irq_or_nmi+0x24/0x50 [ 91.404614] hardirqs last disabled at (1724): [] enter_el1_irq_or_nmi+0x20/0x30 [ 91.405305] softirqs last enabled at (1726): [] return_to_handler+0x0/0x38 [ 91.405976] softirqs last disabled at (1725): [] irq_enter_rcu+0x88/0xa8 [ 94.124678] PASSED [ 94.137271] pinctrl core: initialized pinctrl subsystem [ 94.166010] DMI not present or invalid. [ 94.181220] NET: Registered protocol family 16 [ 94.221500] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations [ 94.222319] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 94.224040] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 94.225379] audit: initializing netlink subsys (disabled) [ 94.232973] audit: type=2000 audit(82.136:1): state=initialized audit_enabled=0 res=1 [ 94.251959] thermal_sys: Registered thermal governor 'step_wise' [ 94.252110] thermal_sys: Registered thermal governor 'power_allocator' [ 94.254016] cpuidle: using governor menu [ 94.259177] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 94.260165] ASID allocator initialised with 32768 entries [ 94.280847] Serial: AMBA PL011 UART driver [ 94.897305] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 47, base_baud = 0) is a PL011 rev1 [ 94.899357] printk: console [ttyAMA0] enabled [ 94.899357] printk: console [ttyAMA0] enabled [ 94.899994] printk: bootconsole [pl11] disabled [ 94.899994] printk: bootconsole [pl11] disabled [ 95.136385] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 95.136940] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 95.137256] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 95.137555] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 95.172131] cryptd: max_cpu_qlen set to 1000 [ 95.238749] ACPI: Interpreter disabled. [ 95.280884] iommu: Default domain type: Translated [ 95.286381] vgaarb: loaded [ 95.292824] SCSI subsystem initialized [ 95.295892] libata version 3.00 loaded. [ 95.301200] usbcore: registered new interface driver usbfs [ 95.302249] usbcore: registered new interface driver hub [ 95.303362] usbcore: registered new device driver usb [ 95.319691] pps_core: LinuxPPS API ver. 1 registered [ 95.319974] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 95.320522] PTP clock support registered [ 95.324309] EDAC MC: Ver: 3.0.0 [ 95.356513] FPGA manager framework [ 95.358764] Advanced Linux Sound Architecture Driver Initialized. [ 95.379906] clocksource: Switched to clocksource arch_sys_counter [ 109.397497] VFS: Disk quotas dquot_6.6.0 [ 109.398763] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 109.404469] pnp: PnP ACPI: disabled [ 109.525997] NET: Registered protocol family 2 [ 109.539351] tcp_listen_portaddr_hash hash table entries: 1024 (order: 4, 81920 bytes, linear) [ 109.541579] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 109.546171] TCP bind hash table entries: 16384 (order: 8, 1179648 bytes, linear) [ 109.550508] TCP: Hash tables configured (established 16384 bind 16384) [ 109.553087] UDP hash table entries: 1024 (order: 5, 163840 bytes, linear) [ 109.554809] UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes, linear) [ 109.558939] NET: Registered protocol family 1 [ 109.569986] RPC: Registered named UNIX socket transport module. [ 109.570338] RPC: Registered udp transport module. [ 109.570584] RPC: Registered tcp transport module. [ 109.570826] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 109.571261] PCI: CLS 0 bytes, default 64 [ 109.591131] hw perfevents: enabled with armv8_pmuv3 PMU driver, 5 counters available [ 109.592826] kvm [1]: HYP mode not available [ 109.700178] Initialise system trusted keyrings [ 109.703933] workingset: timestamp_bits=44 max_order=19 bucket_order=0 [ 109.829691] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 109.839361] NFS: Registering the id_resolver key type [ 109.840697] Key type id_resolver registered [ 109.841002] Key type id_legacy registered [ 109.842732] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 109.846885] 9p: Installing v9fs 9p2000 file system support [ 109.923870] Key type asymmetric registered [ 109.924235] Asymmetric key parser 'x509' registered [ 109.925108] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 109.925557] io scheduler mq-deadline registered [ 109.925920] io scheduler kyber registered [ 110.181262] pl061_gpio 9030000.pl061: PL061 GPIO chip registered [ 110.220260] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: [ 110.221906] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 110.223253] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 110.224080] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 [ 110.226250] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] [ 110.229496] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 [ 110.230080] pci_bus 0000:00: root bus resource [bus 00-ff] [ 110.230473] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 110.230784] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 110.231097] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] [ 110.233438] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 110.243007] pci 0000:00:01.0: [1af4:1009] type 00 class 0x000200 [ 110.244685] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x003f] [ 110.246053] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 110.250653] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 110.260991] pci 0000:00:02.0: [1af4:1009] type 00 class 0x000200 [ 110.262072] pci 0000:00:02.0: reg 0x10: [io 0x0000-0x003f] [ 110.262820] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 110.264321] pci 0000:00:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 110.269991] pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000 [ 110.270750] pci 0000:00:03.0: reg 0x10: [io 0x0000-0x001f] [ 110.271274] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 110.272464] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 110.273043] pci 0000:00:03.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 110.278520] pci 0000:00:04.0: [1af4:1004] type 00 class 0x010000 [ 110.279261] pci 0000:00:04.0: reg 0x10: [io 0x0000-0x003f] [ 110.280022] pci 0000:00:04.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 110.280997] pci 0000:00:04.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 110.293126] pci 0000:00:03.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] [ 110.293948] pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] [ 110.294793] pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] [ 110.295597] pci 0000:00:03.0: BAR 4: assigned [mem 0x8000008000-0x800000bfff 64bit pref] [ 110.296522] pci 0000:00:04.0: BAR 4: assigned [mem 0x800000c000-0x800000ffff 64bit pref] [ 110.297205] pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] [ 110.297717] pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] [ 110.298201] pci 0000:00:03.0: BAR 1: assigned [mem 0x10042000-0x10042fff] [ 110.298701] pci 0000:00:04.0: BAR 1: assigned [mem 0x10043000-0x10043fff] [ 110.299193] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x103f] [ 110.299921] pci 0000:00:02.0: BAR 0: assigned [io 0x1040-0x107f] [ 110.300409] pci 0000:00:04.0: BAR 0: assigned [io 0x1080-0x10bf] [ 110.300883] pci 0000:00:03.0: BAR 0: assigned [io 0x10c0-0x10df] [ 110.359603] EINJ: ACPI disabled. [ 110.756520] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) [ 110.766562] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) [ 110.774880] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) [ 110.781745] virtio-pci 0000:00:04.0: enabling device (0000 -> 0003) [ 110.894006] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 110.949875] SuperH (H)SCI(F) driver initialized [ 110.962431] msm_serial: driver initialized [ 110.995190] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 111.135917] loop: module loaded [ 111.155979] megasas: 07.714.04.00-rc1 [ 111.179577] scsi host0: Virtio SCSI HBA [ 111.201653] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 112.559093] random: fast init done [ 112.595812] sd 0:0:0:0: Power-on or device reset occurred [ 112.611860] sd 0:0:0:0: [sda] 524288 512-byte logical blocks: (268 MB/256 MiB) [ 112.613211] sd 0:0:0:0: [sda] Write Protect is off [ 112.613728] sd 0:0:0:0: [sda] Mode Sense: 63 00 00 08 [ 112.620764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 112.623873] sda: detected capacity change from 0 to 268435456 [ 112.697968] physmap-flash 0.flash: physmap platform flash device: [mem 0x00000000-0x03ffffff] [ 112.704568] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 112.705537] Intel/Sharp Extended Query Table at 0x0031 [ 112.706704] Using buffer write method [ 112.707437] erase region 0: offset=0x0,size=0x40000,blocks=256 [ 112.714453] physmap-flash 0.flash: physmap platform flash device: [mem 0x04000000-0x07ffffff] [ 112.715449] 0.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 112.716117] Intel/Sharp Extended Query Table at 0x0031 [ 112.717014] Using buffer write method [ 112.717344] erase region 0: offset=0x0,size=0x40000,blocks=256 [ 112.717696] Concatenating MTD devices: [ 112.717962] (0): "0.flash" [ 112.718183] (1): "0.flash" [ 112.718396] into device "0.flash" [ 112.733693] sda: detected capacity change from 0 to 268435456 [ 112.734221] sd 0:0:0:0: [sda] Attached SCSI disk [ 112.868897] libphy: Fixed MDIO Bus: probed [ 112.896853] tun: Universal TUN/TAP device driver, 1.6 [ 112.932681] thunder_xcv, ver 1.0 [ 112.933749] thunder_bgx, ver 1.0 [ 112.934733] nicpf, ver 1.0 [ 112.968658] hclge is initializing [ 112.969507] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 112.969832] hns3: Copyright (c) 2017 Huawei Corporation. [ 112.971113] e1000: Intel(R) PRO/1000 Network Driver [ 112.971392] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 112.972667] e1000e: Intel(R) PRO/1000 Network Driver [ 112.972954] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 112.974131] igb: Intel(R) Gigabit Ethernet Network Driver [ 112.974412] igb: Copyright (c) 2007-2014 Intel Corporation. [ 112.975297] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 112.975775] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 112.985686] sky2: driver version 1.30 [ 113.009304] VFIO - User Level meta-driver version: 0.3 [ 113.048551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 113.048946] ehci-pci: EHCI PCI platform driver [ 113.049956] ehci-platform: EHCI generic platform driver [ 113.053241] ehci-orion: EHCI orion driver [ 113.056368] ehci-exynos: EHCI Exynos driver [ 113.059235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 113.060113] ohci-pci: OHCI PCI platform driver [ 113.061205] ohci-platform: OHCI generic platform driver [ 113.064420] ohci-exynos: OHCI Exynos driver [ 113.075583] usbcore: registered new interface driver usb-storage [ 113.146880] rtc-pl031 9010000.pl031: registered as rtc0 [ 113.148308] rtc-pl031 9010000.pl031: setting system clock to 2020-11-24T13:08:31 UTC (1606223311) [ 113.164111] i2c /dev entries driver [ 113.325456] sdhci: Secure Digital Host Controller Interface driver [ 113.325754] sdhci: Copyright(c) Pierre Ossman [ 113.336779] Synopsys Designware Multimedia Card Interface Driver [ 113.363215] sdhci-pltfm: SDHCI platform and OF driver helper [ 113.400526] ledtrig-cpu: registered to indicate activity on CPUs [ 113.441824] usbcore: registered new interface driver usbhid [ 113.442164] usbhid: USB HID core driver [ 113.560589] drop_monitor: Initializing network drop monitor service [ 113.562809] NET: Registered protocol family 17 [ 113.566122] 9pnet: Installing 9P2000 support [ 113.577170] Key type dns_resolver registered [ 113.581865] registered taskstats version 1 [ 113.582937] Running tests on all trace events: [ 113.583197] Testing all events: OK [ 136.678315] Running tests again, along with the function tracer [ 136.683603] Running tests on all trace events: [ 136.689620] Testing all events: OK [ 349.011031] Testing ftrace filter: OK [ 349.030607] Loading compiled-in X.509 certificates [ 349.062241] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 349.080633] ALSA device list: [ 349.081036] No soundcards found. [ 349.081340] TAP version 14 [ 349.081565] 1..0 [ 349.088742] uart-pl011 9000000.pl011: no DMA platform data [ 349.105332] EXT4-fs (sda): mounting ext3 file system using the ext4 subsystem [ 349.195485] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null) [ 349.197107] VFS: Mounted root (ext3 filesystem) readonly on device 8:0. [ 349.201501] devtmpfs: mounted [ 349.369972] Freeing unused kernel memory: 8896K [ 349.371955] Run /sbin/init as init process [ 349.372238] with arguments: [ 349.372474] /sbin/init [ 349.372689] with environment: [ 349.372927] HOME=/ [ 349.373135] TERM=linux [ 349.373345] earlyprintk=serial [ 349.838705] EXT4-fs (sda): re-mounted. Opts: (null) [ 349.840571] ext3 filesystem being remounted at / supports timestamps until 2038 (0x7fffffff)