| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201125172618.112707-4-zhouyanjie@wanyeetech.com>
Date: Thu, 26 Nov 2020 01:26:17 +0800
From: 周琰杰 (Zhou Yanjie)
<zhouyanjie@...yeetech.com>
To: sboyd@...nel.org, robh+dt@...nel.org, mturquette@...libre.com,
paul@...pouillou.net
Cc: linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, dongsheng.qiu@...enic.com,
aric.pzqi@...enic.com, rick.tyliu@...enic.com,
yanfei.li@...enic.com, sernia.zhou@...mail.com,
zhenwenjin@...il.com
Subject: [PATCH 3/4] clk: Ingenic: Add missing clocks for Ingenic SoCs.
Add CIM, AIC, DMIC clocks for the X1000 SoC, and CIM, AIC, DMIC, I2S
clocks for the X1830 SoC from Ingenic.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@...yeetech.com>
---
drivers/clk/ingenic/x1000-cgu.c | 19 ++++
drivers/clk/ingenic/x1830-cgu.c | 189 +++++++++++++++++++++++++++++++++++++++-
2 files changed, 207 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/ingenic/x1000-cgu.c b/drivers/clk/ingenic/x1000-cgu.c
index 9aa20b5..d340bcd 100644
--- a/drivers/clk/ingenic/x1000-cgu.c
+++ b/drivers/clk/ingenic/x1000-cgu.c
@@ -360,6 +360,13 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.mux = { CGU_REG_SSICDR, 30, 1 },
},
+ [X1000_CLK_CIM] = {
+ "cim", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { X1000_CLK_SCLKA, X1000_CLK_MPLL, -1, -1 },
+ .mux = { CGU_REG_CIMCDR, 31, 1 },
+ .div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 },
+ },
+
[X1000_CLK_EXCLK_DIV512] = {
"exclk_div512", CGU_CLK_FIXDIV,
.parents = { X1000_CLK_EXCLK },
@@ -411,6 +418,12 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.gate = { CGU_REG_CLKGR, 9 },
},
+ [X1000_CLK_AIC] = {
+ "aic", CGU_CLK_GATE,
+ .parents = { X1000_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 11 },
+ },
+
[X1000_CLK_UART0] = {
"uart0", CGU_CLK_GATE,
.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
@@ -429,6 +442,12 @@ static const struct ingenic_cgu_clk_info x1000_cgu_clocks[] = {
.gate = { CGU_REG_CLKGR, 16 },
},
+ [X1000_CLK_DMIC] = {
+ "dmic", CGU_CLK_GATE,
+ .parents = { X1000_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR, 17 },
+ },
+
[X1000_CLK_TCU] = {
"tcu", CGU_CLK_GATE,
.parents = { X1000_CLK_EXCLK, -1, -1, -1 },
diff --git a/drivers/clk/ingenic/x1830-cgu.c b/drivers/clk/ingenic/x1830-cgu.c
index 950aee2..e76e82c 100644
--- a/drivers/clk/ingenic/x1830-cgu.c
+++ b/drivers/clk/ingenic/x1830-cgu.c
@@ -52,6 +52,15 @@
#define USBPCR_SIDDQ BIT(21)
#define USBPCR_OTG_DISABLE BIT(20)
+/* bits within the I2SCDR register */
+#define I2SCDR_I2PCS_SHIFT 30
+#define I2SCDR_I2PCS_MASK (0x3 << I2SCDR_I2PCS_SHIFT)
+#define I2SCDR_I2SDIV_M_SHIFT 20
+#define I2SCDR_I2SDIV_M_MASK (0x1ff << I2SCDR_I2SDIV_M_SHIFT)
+#define I2SCDR_I2SDIV_N_SHIFT 0
+#define I2SCDR_I2SDIV_N_MASK (0xfffff << I2SCDR_I2SDIV_N_SHIFT)
+#define I2SCDR_CE_I2S BIT(29)
+
static struct ingenic_cgu *cgu;
static int x1830_usb_phy_enable(struct clk_hw *hw)
@@ -89,6 +98,157 @@ static const struct clk_ops x1830_otg_phy_ops = {
.is_enabled = x1830_usb_phy_is_enabled,
};
+static u8 x1830_i2s_get_parent(struct clk_hw *hw)
+{
+ u32 i2scdr;
+
+ i2scdr = readl(cgu->base + CGU_REG_I2SCDR);
+
+ return (i2scdr & I2SCDR_I2PCS_MASK) >> I2SCDR_I2PCS_SHIFT;
+}
+
+static int x1830_i2s_set_parent(struct clk_hw *hw, u8 idx)
+{
+ writel(idx << I2SCDR_I2PCS_SHIFT, cgu->base + CGU_REG_I2SCDR);
+
+ return 0;
+}
+
+static unsigned long x1830_i2s_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ unsigned m, n;
+ u32 i2scdr;
+
+ i2scdr = readl(cgu->base + CGU_REG_I2SCDR);
+
+ m = (i2scdr & I2SCDR_I2SDIV_M_MASK) >> I2SCDR_I2SDIV_M_SHIFT;
+ n = (i2scdr & I2SCDR_I2SDIV_N_MASK) >> I2SCDR_I2SDIV_N_SHIFT;
+
+ return div_u64((u64)parent_rate * m, n);
+}
+
+static unsigned long x1830_i2s_calc(unsigned long rate, unsigned long parent_rate,
+ unsigned *pm, unsigned *pn)
+{
+ u64 curr_delta, curr_m, curr_n, delta, m, n;
+
+ if ((parent_rate % rate == 0) && ((parent_rate / rate) > 1)) {
+ m = 1;
+ n = parent_rate / rate;
+ goto out;
+ }
+
+ delta = rate;
+
+ /*
+ * The length of M is 9 bits, its value must be between 1 and 511.
+ * The length of N is 20 bits, its value must be between 2 and 1048575,
+ * and must not be less than 2 times of the value of M.
+ */
+ for (curr_m = 511; curr_m >= 1; curr_m--) {
+ curr_n = parent_rate * curr_m;
+ curr_delta = do_div(curr_n, rate);
+
+ if (curr_n < 2 * curr_m || curr_n > 1048575)
+ continue;
+
+ if (curr_delta == 0)
+ break;
+
+ if (curr_delta < delta) {
+ m = curr_m;
+ n = curr_n;
+ delta = curr_delta;
+ }
+ }
+
+out:
+ if (pm)
+ *pm = m;
+ if (pn)
+ *pn = n;
+
+ return div_u64((u64)parent_rate * m, n);
+}
+
+static long x1830_i2s_round_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long *prate)
+{
+ return x1830_i2s_calc(req_rate, *prate, NULL, NULL);
+}
+
+static int x1830_i2s_set_rate(struct clk_hw *hw, unsigned long req_rate,
+ unsigned long parent_rate)
+{
+ unsigned long rate;
+ unsigned m, n;
+ u32 ctl;
+
+ /*
+ * The parent clock rate of I2S must not be lower than 2 times
+ * of the target clock rate.
+ */
+ if (parent_rate < 2 * req_rate)
+ return -EINVAL;
+
+ rate = x1830_i2s_calc(req_rate, parent_rate, &m, &n);
+ if (rate != req_rate)
+ pr_info("%s: request I2S rate %luHz, actual %luHz\n", __func__,
+ req_rate, rate);
+
+ ctl = readl(cgu->base + CGU_REG_I2SCDR);
+ ctl &= ~I2SCDR_I2SDIV_M_MASK;
+ ctl |= m << I2SCDR_I2SDIV_M_SHIFT;
+ ctl &= ~I2SCDR_I2SDIV_N_MASK;
+ ctl |= n << I2SCDR_I2SDIV_N_SHIFT;
+ writel(ctl, cgu->base + CGU_REG_I2SCDR);
+
+ return 0;
+}
+
+static int x1830_i2s_enable(struct clk_hw *hw)
+{
+ u32 ctl;
+
+ ctl = readl(cgu->base + CGU_REG_I2SCDR);
+ ctl |= I2SCDR_CE_I2S;
+ writel(ctl, cgu->base + CGU_REG_I2SCDR);
+
+ return 0;
+}
+
+static void x1830_i2s_disable(struct clk_hw *hw)
+{
+ u32 ctl;
+
+ ctl = readl(cgu->base + CGU_REG_I2SCDR);
+ ctl &= ~I2SCDR_CE_I2S;
+ writel(ctl, cgu->base + CGU_REG_I2SCDR);
+}
+
+static int x1830_i2s_is_enabled(struct clk_hw *hw)
+{
+ u32 ctl;
+
+ ctl = readl(cgu->base + CGU_REG_I2SCDR);
+
+ return !!(ctl & I2SCDR_CE_I2S);
+}
+
+static const struct clk_ops x1830_i2s_ops = {
+ .get_parent = x1830_i2s_get_parent,
+ .set_parent = x1830_i2s_set_parent,
+
+ .recalc_rate = x1830_i2s_recalc_rate,
+ .round_rate = x1830_i2s_round_rate,
+ .set_rate = x1830_i2s_set_rate,
+
+ .enable = x1830_i2s_enable,
+ .disable = x1830_i2s_disable,
+ .is_enabled = x1830_i2s_is_enabled,
+};
+
static const s8 pll_od_encoding[64] = {
0x0, 0x1, -1, 0x2, -1, -1, -1, 0x3,
-1, -1, -1, -1, -1, -1, -1, 0x4,
@@ -201,7 +361,7 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
},
},
- /* Custom (SoC-specific) OTG PHY */
+ /* Custom (SoC-specific) */
[X1830_CLK_OTGPHY] = {
"otg_phy", CGU_CLK_CUSTOM,
@@ -209,6 +369,13 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
.custom = { &x1830_otg_phy_ops },
},
+ [X1830_CLK_I2S] = {
+ "i2s", CGU_CLK_CUSTOM,
+ .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+ X1830_CLK_VPLL, X1830_CLK_EPLL },
+ .custom = { &x1830_i2s_ops },
+ },
+
/* Muxes & dividers */
[X1830_CLK_SCLKA] = {
@@ -329,6 +496,14 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
.mux = { CGU_REG_SSICDR, 29, 1 },
},
+ [X1830_CLK_CIM] = {
+ "cim", CGU_CLK_MUX | CGU_CLK_DIV,
+ .parents = { X1830_CLK_SCLKA, X1830_CLK_MPLL,
+ X1830_CLK_VPLL, X1830_CLK_EPLL },
+ .mux = { CGU_REG_CIMCDR, 30, 2 },
+ .div = { CGU_REG_CIMCDR, 0, 1, 8, 29, 28, 27 },
+ },
+
[X1830_CLK_EXCLK_DIV512] = {
"exclk_div512", CGU_CLK_FIXDIV,
.parents = { X1830_CLK_EXCLK },
@@ -386,6 +561,18 @@ static const struct ingenic_cgu_clk_info x1830_cgu_clocks[] = {
.gate = { CGU_REG_CLKGR0, 9 },
},
+ [X1830_CLK_AIC] = {
+ "aic", CGU_CLK_GATE,
+ .parents = { X1830_CLK_EXCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 11 },
+ },
+
+ [X1830_CLK_DMIC] = {
+ "dmic", CGU_CLK_GATE,
+ .parents = { X1830_CLK_PCLK, -1, -1, -1 },
+ .gate = { CGU_REG_CLKGR0, 12 },
+ },
+
[X1830_CLK_UART0] = {
"uart0", CGU_CLK_GATE,
.parents = { X1830_CLK_EXCLK, -1, -1, -1 },
--
2.7.4
Powered by blists - more mailing lists