Message-ID: <CAEGmHFE6EfUQ-RE+sXEppOGKxPJ3i9hUSWUDPAGXDjxYm0P_kw@mail.gmail.com>
Date:   Wed, 25 Nov 2020 10:29:43 -0800
From:   Furquan Shaikh <furquan@...gle.com>
To:     "Rafael J. Wysocki" <rafael@...nel.org>
Cc:     "Rafael J . Wysocki" <rjw@...ysocki.net>,
        Len Brown <lenb@...nel.org>,
        ACPI Devel Maling List <linux-acpi@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Linux PM <linux-pm@...r.kernel.org>,
        Aaron Durbin <adurbin@...gle.com>,
        Duncan Laurie <dlaurie@...gle.com>
Subject: Re: [RFC] ACPI PM during kernel poweroff/reboot

On Wed, Nov 25, 2020 at 9:51 AM Rafael J. Wysocki <rafael@...nel.org> wrote:
>
> On Wed, Nov 25, 2020 at 6:43 PM Furquan Shaikh <furquan@...gle.com> wrote:
> >
> > On Wed, Nov 25, 2020 at 8:39 AM Rafael J. Wysocki <rafael@...nel.org> wrote:
> > >
> > > On Thu, Nov 12, 2020 at 8:19 PM Furquan Shaikh <furquan@...gle.com> wrote:
> > > >
> > > > On x86 Chromebooks, we have observed this issue for a long time now -
> > > > when the system is powered off or rebooted, ACPI PM is not invoked and
> > > > this results in PowerResource _OFF methods not being invoked for any
> > > > of the devices. The _OFF methods are invoked correctly in case of
> > > > suspend-to-idle (S0ix) and suspend-to-memory(S3). However, they do not
> > > > get invoked when `poweroff` or `reboot` are triggered.
> > > >
> > > > One of the differences between suspend, hibernate and shutdown paths
> > > > in Linux kernel is that the shutdown path does not use the typical
> > > > device PM phases (prepare, freeze/suspend, poweroff) as used by
> > > > suspend/hibernate. Instead the shutdown path makes use of
> > > > .shutdown_pre() and .shutdown() callbacks.
> > > >
> > > > If I understand correctly, .shutdown() has been around for a long time
> > > > and existed even before the PM callbacks were added. Thus,
> > > > pm->poweroff() and .shutdown() are supposed to be analogous and
> > > > consistent in the behavior.
> > >
> > > Well, not quite.
> > >
> > > ->shutdown() is expected to be a lightweight operation also suitable
> > > for kexec() and similar situations where ->poweroff() may not work.
> > >
> > > > This is why runtime PM is disallowed by
> > > > device_shutdown() before it calls .shutdown() (i.e. to keep behavior
> > > > consistent for both paths). However, in practice, there are
> > > > differences in behavior for the pm->poweroff() and .shutdown() paths
> > > > since the shutdown path does not execute any PM domain operations.
> > >
> > > That's correct.
> > >
> > > > Because of this difference in behavior, shutdown path never invokes
> > > > ACPI PM and thus the ACPI PowerResources are not turned off when the
> > > > system is rebooted or powered off (sleep S5). On Chromebooks, it is
> > > > critical to run the _OFF methods for poweroff/reboot in order to
> > > > ensure that the device power off sequencing requirements are met.
> > > > Currently, these requirements are violated which impact the
> > > > reliability of devices over the lifetime of the platform.
> > > >
> > > > There are a few ways in which this can be addressed:
> > > >
> > > > 1. Similar to the case of hibernation, a new
> > > > PMSG_POWEROFF/PM_EVENT_POWEROFF can be introduced to invoke device
> > > > power management phases using `dpm_suspend_start(PMSG_POWEROFF)` and
> > > > `dpm_suspend_end(PMSG_POWEROFF)`. However, as the shutdown path uses
> > > > the class/bus/driver .shutdown() callbacks, adding dpm phases for
> > > > poweroff complicates the order of operations. If the dpm phases are
> > > > run before .shutdown() callbacks, then it will result in the callbacks
> > > > accessing devices after they are powered off. If the .shutdown()
> > > > callbacks are run before dpm phases, then the pm->poweroff() calls are
> > > > made after the device shutdown is done. Since .shutdown() and
> > > > pm->poweroff() are supposed to be analogous, having both calls in the
> > > > shutdown path is not only redundant but also results in incorrect
> > > > behavior.
> > > >
> > > > 2. Another option is to update device_shutdown() to make
> > > > pm_domain.poweroff calls after the class/bus/driver .shutdown() is
> > > > done. However, this suffers from the same problem as #1 above i.e. it
> > > > is redundant and creates conflicting order of operations.
> > > >
> > > > 3. Third possible solution is to detach the device from the PM domain
> > > > after it is shutdown. Currently, device drivers perform a detach
> > > > operation only when the device is removed. However, in case of
> > > > poweroff/reboot as the device is already shutdown, detaching PM domain
> > > > will give it the opportunity to ensure that any power resources are
> > > > correctly turned off before the system shuts down.
> > >
> > > 4. Make Chromebooks call something like hibernation_platform_enter()
> > > on S5 entries (including reboot).
> >
> > Actually, Chromebooks do not support S4 and hence CONFIG_HIBERNATION.
>
> This doesn't matter.  The ->poweroff callbacks can still be used by
> them (of course, that part of the current hibernation support code
> needs to be put under a more general Kconfig option for that, but this
> is a technical detail).

Ah I see what you are saying. Just to be sure I understand this
correctly. Is this what you are thinking:
1. Extract hibernation_platform_enter() and any other helpers required
to trigger the PM phases for shutdown into a separate unit controlled
by a more general Kconfig.
2. Add a new Kconfig that enables support for performing PM phases
during the poweroff/reboot phases.
3. Based on this new Kconfig selection, LINUX_REBOOT_CMD_RESTART,
LINUX_REBOOT_CMD_HALT, LINUX_REBOOT_CMD_POWER_OFF will be updated to
use the new paths instead of the current lightweight calls.

>
> > This is done for a number of reasons including security. Hence, I
> > don't think using hibernation_platform_enter() would be an option.
>
> Yes, it is an option.
>
> Having "hibernation" in the name need not mean that the given piece of
> code is really hibernation-specific ...

Sorry, I had misunderstood the suggestion before. I have attempted to
outline your proposal with some more details above.

>
> > >
> > > > Out of these, I think #3 makes the most sense as it does not introduce
> > > > any conflicting operations. I verified that the following diff results
> > > > in _OFF methods getting invoked in both poweroff and reboot cases:
> > >
> > > This won't work for PCI devices though, only for devices in the ACPI
> > > PM domain, so it is not sufficient in general.
> >
> > That is true. The proposed solution only handles detaching of PM
> > domains. I understand your point about this not working for any
> > devices not part of the PM domain. The issues that we have observed in
> > shutdown/reboot paths have been specific to ACPI power resources
> > controlling the sequencing to external devices.
>
> PCI devices PM can use power resources too.  For instance, this has
> been quite common for discrete GPUs in laptops IIRC.

Sorry about my naive question: Is the power resource not described
using ACPI in this case? (I haven't run into a situation with PCI
devices using non-ACPI power resources, so curious to understand the
scenario).

Powered by blists - more mailing lists