[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201125060838.165576-1-bjorn.andersson@linaro.org>
Date: Wed, 25 Nov 2020 00:08:38 -0600
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Steev Klimaszewski <steev@...i.org>,
Shawn Guo <shawn.guo@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: qcom: c630: Expose LID events
The LID state can be read from GPIO 124 and the "tablet mode" from GPIO
95, expose these to the system using gpio-keys and mark the falling edge
of the LID state as a wakeup-source - to wake the system from suspend.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
.../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index bb314973eb0c..f956dbf664c1 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -8,6 +8,8 @@
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include <dt-bindings/sound/qcom,q6afe.h>
#include <dt-bindings/sound/qcom,q6asm.h>
@@ -21,6 +23,27 @@ / {
aliases {
hsuart0 = &uart6;
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&lid_pin_active>, <&mode_pin_active>;
+
+ lid {
+ gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ wakeup-source;
+ wakeup-event-action = <EV_ACT_DEASSERTED>;
+ };
+
+ mode {
+ gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_TABLET_MODE>;
+ };
+ };
};
&adsp_pas {
@@ -466,6 +489,22 @@ wcd_intr_default: wcd_intr_default {
bias-pull-down;
drive-strength = <2>;
};
+
+ lid_pin_active: lid-pin {
+ pins = "gpio124";
+ function = "gpio";
+
+ input-enable;
+ bias-disable;
+ };
+
+ mode_pin_active: mode-pin {
+ pins = "gpio95";
+ function = "gpio";
+
+ input-enable;
+ bias-disable;
+ };
};
&uart6 {
--
2.29.2
Powered by blists - more mailing lists