| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <24cd5076-39c8-827a-5932-1e178f2628fd@collabora.com>
Date: Fri, 27 Nov 2020 09:56:14 +0100
From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
To: Weiyi Lu <weiyi.lu@...iatek.com>,
Matthias Brugger <mbrugger@...e.com>
Cc: linux-kernel@...r.kernel.org, matthias.bgg@...il.com,
drinkcat@...omium.org, hsinyi@...omium.org,
Collabora Kernel ML <kernel@...labora.com>,
fparent@...libre.com, Rob Herring <robh@...nel.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH v4 01/16] dt-bindings: power: Add bindings for the
Mediatek SCPSYS power domains controller
Hi Weiyi,
On 27/11/20 3:24, Weiyi Lu wrote:
> On Fri, 2020-10-30 at 12:36 +0100, Enric Balletbo i Serra wrote:
>> The System Control Processor System (SCPSYS) has several power management
>> related tasks in the system. Add the bindings to define the power
>> domains for the SCPSYS power controller.
>>
>> Co-developed-by: Matthias Brugger <mbrugger@...e.com>
>> Signed-off-by: Matthias Brugger <mbrugger@...e.com>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
>> Reviewed-by: Rob Herring <robh@...nel.org>
>> ---
>>
>> Changes in v4:
>> - Fix indentation warnings reported by yamllint
>>
>> Changes in v3:
>> - Use hex for unit-addresses.
>> - Define child nodes for nested power domains even are duplicated, but
>> more clear than adding a regex scaped to be a valid URI.
>>
>> Changes in v2:
>> - Use generic node names (power-domain).
>> - Define valid values for common properties like #power-domain-cells.
>>
>> .../power/mediatek,power-controller.yaml | 289 ++++++++++++++++++
>> 1 file changed, 289 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
>> new file mode 100644
>> index 000000000000..73b8988bd063
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/power/mediatek,power-controller.yaml
>> @@ -0,0 +1,289 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/power/mediatek,power-controller.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Mediatek Power Domains Controller
>> +
>> +maintainers:
>> + - Weiyi Lu <weiyi.lu@...iatek.com>
>> + - Matthias Brugger <mbrugger@...e.com>
>> +
>> +description: |
>> + Mediatek processors include support for multiple power domains which can be
>> + powered up/down by software based on different application scenes to save power.
>> +
>> + IP cores belonging to a power domain should contain a 'power-domains'
>> + property that is a phandle for SCPSYS node representing the domain.
>> +
>> +properties:
>> + $nodename:
>> + const: power-controller
>> +
>> + compatible:
>> + enum:
>> + - mediatek,mt8173-power-controller
>> +
>> + '#power-domain-cells':
>> + const: 1
>> +
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> +patternProperties:
>> + "^power-domain@[0-9a-f]+$":
>> + type: object
>> + description: |
>> + Represents the power domains within the power controller node as documented
>> + in Documentation/devicetree/bindings/power/power-domain.yaml.
>> +
>> + properties:
>> +
>> + '#power-domain-cells':
>> + description:
>> + Must be 0 for nodes representing a single PM domain and 1 for nodes
>> + providing multiple PM domains.
>> +
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> + reg:
>> + description: |
>> + Power domain index. Valid values are defined in:
>> + "include/dt-bindings/power/mt8173-power.h" - for MT8173 type power domain.
>> + maxItems: 1
>> +
>> + clocks:
>> + description: |
>> + A number of phandles to clocks that need to be enabled during domain
>> + power-up sequencing.
>> +
>> + clock-names:
>> + description: |
>> + List of names of clocks, in order to match the power-up sequencing
>> + for each power domain we need to group the clocks by name. BASIC
>> + clocks need to be enabled before enabling the corresponding power
>> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
>> + SUSBYS clocks need to be enabled before releasing the bus protection,
>> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
>> +
>> + In order to follow properly the power-up sequencing, the clocks must
>> + be specified by order, adding first the BASIC clocks followed by the
>> + SUSBSYS clocks.
>> +
>> + mediatek,infracfg:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the INFRACFG register range.
>> +
>> + mediatek,smi:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the SMI register range.
>> +
>> + patternProperties:
>> + "^power-domain@[0-9a-f]+$":
>> + type: object
>> + description: |
>> + Represents a power domain child within a power domain parent node.
>> +
>> + properties:
>> +
>> + '#power-domain-cells':
>> + description:
>> + Must be 0 for nodes representing a single PM domain and 1 for nodes
>> + providing multiple PM domains.
>> +
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + description: |
>> + A number of phandles to clocks that need to be enabled during domain
>> + power-up sequencing.
>> +
>> + clock-names:
>> + description: |
>> + List of names of clocks, in order to match the power-up sequencing
>> + for each power domain we need to group the clocks by name. BASIC
>> + clocks need to be enabled before enabling the corresponding power
>> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
>> + SUSBYS clocks need to be enabled before releasing the bus protection,
>> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
>> +
>> + In order to follow properly the power-up sequencing, the clocks must
>> + be specified by order, adding first the BASIC clocks followed by the
>> + SUSBSYS clocks.
>> +
>> + mediatek,infracfg:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the INFRACFG register range.
>> +
>> + mediatek,smi:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the SMI register range.
>> +
>> + patternProperties:
>> + "^power-domain@[0-9a-f]+$":
>> + type: object
>> + description: |
>> + Represents a power domain child within a power domain parent node.
>> +
>> + properties:
>> +
>> + '#power-domain-cells':
>> + description:
>> + Must be 0 for nodes representing a single PM domain and 1 for nodes
>> + providing multiple PM domains.
>> +
>> + '#address-cells':
>> + const: 1
>> +
>> + '#size-cells':
>> + const: 0
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + description: |
>> + A number of phandles to clocks that need to be enabled during domain
>> + power-up sequencing.
>> +
>> + clock-names:
>> + description: |
>> + List of names of clocks, in order to match the power-up sequencing
>> + for each power domain we need to group the clocks by name. BASIC
>> + clocks need to be enabled before enabling the corresponding power
>> + domain, and should not have a '-' in their name (i.e mm, mfg, venc).
>> + SUSBYS clocks need to be enabled before releasing the bus protection,
>> + and should contain a '-' in their name (i.e mm-0, isp-0, cam-0).
>> +
>> + In order to follow properly the power-up sequencing, the clocks must
>> + be specified by order, adding first the BASIC clocks followed by the
>> + SUSBSYS clocks.
>> +
>> + mediatek,infracfg:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the INFRACFG register range.
>> +
>> + mediatek,smi:
>> + $ref: /schemas/types.yaml#definitions/phandle
>> + description: phandle to the device containing the SMI register range.
>> +
>> + required:
>> + - reg
>> +
>> + additionalProperties: false
>> +
>> + required:
>> + - reg
>> +
>> + additionalProperties: false
>> +
>> + required:
>> + - reg
>> +
>> + additionalProperties: false
>> +
>> +required:
>> + - compatible
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/clock/mt8173-clk.h>
>> + #include <dt-bindings/power/mt8173-power.h>
>> +
>> + soc {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + scpsys: syscon@...06000 {
>> + compatible = "syscon", "simple-mfd";
>> + reg = <0 0x10006000 0 0x1000>;
>> +
>> + spm: power-controller {
>> + compatible = "mediatek,mt8173-power-controller";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #power-domain-cells = <1>;
>
> Hi Enric and Matthias,
>
> I'd like to know whether we could only keep this power-domain-cells
> property here and make others optional, which can more directly point
> out who is the real power domain provider?
>
This is enforced by the generic power-domain binding
(Documentation/devicetree/bindings/power/power-domain.yaml) as a required
property. So, if needs to be changed, should be changed there. My understanding,
though, is that (like the binding is) this property should be required to
properly define a power-domain.
Cheers,
Enric
>> +
>> + /* power domains of the SoC */
>> + power-domain@...173_POWER_DOMAIN_VDEC {
>> + reg = <MT8173_POWER_DOMAIN_VDEC>;
>> + clocks = <&topckgen CLK_TOP_MM_SEL>;
>> + clock-names = "mm";
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@...173_POWER_DOMAIN_VENC {
>> + reg = <MT8173_POWER_DOMAIN_VENC>;
>> + clocks = <&topckgen CLK_TOP_MM_SEL>,
>> + <&topckgen CLK_TOP_VENC_SEL>;
>> + clock-names = "mm", "venc";
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@...173_POWER_DOMAIN_ISP {
>> + reg = <MT8173_POWER_DOMAIN_ISP>;
>> + clocks = <&topckgen CLK_TOP_MM_SEL>;
>> + clock-names = "mm";
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@...173_POWER_DOMAIN_MM {
>> + reg = <MT8173_POWER_DOMAIN_MM>;
>> + clocks = <&topckgen CLK_TOP_MM_SEL>;
>> + clock-names = "mm";
>> + #power-domain-cells = <0>;
>> + mediatek,infracfg = <&infracfg>;
>> + };
>> + power-domain@...173_POWER_DOMAIN_VENC_LT {
>> + reg = <MT8173_POWER_DOMAIN_VENC_LT>;
>> + clocks = <&topckgen CLK_TOP_MM_SEL>,
>> + <&topckgen CLK_TOP_VENC_LT_SEL>;
>> + clock-names = "mm", "venclt";
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@...173_POWER_DOMAIN_AUDIO {
>> + reg = <MT8173_POWER_DOMAIN_AUDIO>;
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@...173_POWER_DOMAIN_USB {
>> + reg = <MT8173_POWER_DOMAIN_USB>;
>> + #power-domain-cells = <0>;
>> + };
>> + power-domain@...173_POWER_DOMAIN_MFG_ASYNC {
>> + reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
>> + clocks = <&clk26m>;
>> + clock-names = "mfg";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #power-domain-cells = <1>;
>> +
>> + power-domain@...173_POWER_DOMAIN_MFG_2D {
>> + reg = <MT8173_POWER_DOMAIN_MFG_2D>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #power-domain-cells = <1>;
>> +
>> + power-domain@...173_POWER_DOMAIN_MFG {
>> + reg = <MT8173_POWER_DOMAIN_MFG>;
>> + #power-domain-cells = <0>;
>> + mediatek,infracfg = <&infracfg>;
>> + };
>> + };
>> + };
>> + };
>> + };
>> + };
>
Powered by blists - more mailing lists