linux-kernel - [PATCH 2/2] mmc: core: MMC_CAP2_HS200_1_8V_SDR with mmc-hs400-1

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201127033527.407-1-chris.ruehl@gtsys.com.hk>
Date:   Fri, 27 Nov 2020 11:35:21 +0800
From:   Chris Ruehl <chris.ruehl@...ys.com.hk>
To:     unlisted-recipients:; (no To-header on input)
Cc:     Chris Ruehl <chris.ruehl@...ys.com.hk>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Michał Mirosław <mirq-linux@...e.qmqm.pl>,
        "Gustavo A. R. Silva" <gustavoars@...nel.org>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
        Matthias Schiffer <matthias.schiffer@...tq-group.com>,
        Seungwon Jeon <tgih.jun@...sung.com>,
        Chris Ball <chris@...ntf.net>, linux-mmc@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] mmc: core: MMC_CAP2_HS200_1_8V_SDR with mmc-hs400-1_8v

This patch remove the MMC_CAP2_HS200_1_8V_SDR capacity from
host->cap2 when the dt property mmc-hs400-1v8 set. It cause
error and occasionally hang on boot and reboot.
Board with this issue: rk3399 with SanDisk DG4008 eMMC.

This patch did not change the mmc-hs400-1_2v host->cap2
added the MMC_CAP2_HS200_1_2V_SDR.

Log shows a boot process with a HS400 5.1 capable SanDisk 8G
with mmc-hs400-1_8v dt property and the MMC_CAP2_HS200_1_8V_SDR
append to the host->cap2.

[    1.775721] mmc1: CQHCI version 5.10
[    1.802342] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    2.007581] mmc1: mmc_select_hs200 failed, error -110
[    2.007589] mmc1: error -110 whilst initialising MMC card
[    2.413559] mmc1: mmc_select_hs200 failed, error -110
[    2.413562] mmc1: error -110 whilst initialising MMC card
[    3.183343] mmc1: Command Queue Engine enabled
[    3.183355] mmc1: new HS400 MMC card at address 0001
[    3.197163] mmcblk1: mmc1:0001 DG4008 7.28 GiB
[    3.197256] mmcblk1boot0: mmc1:0001 DG4008 partition 1 4.00 MiB
[    3.197360] mmcblk1boot1: mmc1:0001 DG4008 partition 2 4.00 MiB
[    3.197479] mmcblk1rpmb: mmc1:0001 DG4008 partition 3 4.00 MiB, chardev (242:0)

after patch applied
[    1.746691] mmc1: CQHCI version 5.10
[    1.773316] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    1.858410] mmc1: Command Queue Engine enabled
[    1.858418] mmc1: new HS400 MMC card at address 0001
[    1.858897] mmcblk1: mmc1:0001 DG4008 7.28 GiB
[    1.859002] mmcblk1boot0: mmc1:0001 DG4008 partition 1 4.00 MiB
[    1.859097] mmcblk1boot1: mmc1:0001 DG4008 partition 2 4.00 MiB
[    1.859182] mmcblk1rpmb: mmc1:0001 DG4008 partition 3 4.00 MiB, chardev (242:0)

Fixes: c373eb489b27b mmc: core: add DT bindings for eMMC HS400 1.8/1.2V

Signed-off-by: Chris Ruehl <chris.ruehl@...ys.com.hk>
---
 drivers/mmc/core/host.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 96b2ca1f1b06..f55113e24c68 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -295,7 +295,7 @@ int mmc_of_parse(struct mmc_host *host)
 	if (device_property_read_bool(dev, "mmc-hs200-1_2v"))
 		host->caps2 |= MMC_CAP2_HS200_1_2V_SDR;
 	if (device_property_read_bool(dev, "mmc-hs400-1_8v"))
-		host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR;
+		host->caps2 |= MMC_CAP2_HS400_1_8V;
 	if (device_property_read_bool(dev, "mmc-hs400-1_2v"))
 		host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR;
 	if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe"))
--
2.20.1