[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <65401815-cb2e-58ec-7653-f09d6a25804c@arm.com>
Date: Sat, 28 Nov 2020 19:56:34 +0000
From: André Przywara <andre.przywara@....com>
To: Frank Lee <frank@...winnertech.com>, tiny.windzz@...il.com
Cc: Marek Vasut <marex@...x.de>, Ulf Hansson <ulf.hansson@...aro.org>,
Wolfram Sang <wsa+renesas@...g-engineering.com>,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
Maxime Ripard <mripard@...nel.org>,
Douglas Anderson <dianders@...omium.org>,
Rui Miguel Silva <rmfrfs@...il.com>,
Chen-Yu Tsai <wens@...e.org>,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [RESEND PATCH 17/19] mmc: sunxi: add support for A100 mmc
controller
On 10/11/2020 06:46, Frank Lee wrote:
Hi,
> From: Yangtao Li <frank@...winnertech.com>
>
> This patch adds support for A100 MMC controller, which use word address
> for internal dma.
>
> Signed-off-by: Yangtao Li <frank@...winnertech.com>
> ---
> drivers/mmc/host/sunxi-mmc.c | 28 +++++++++++++++++++++++++---
> 1 file changed, 25 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
> index fc62773602ec..1518b64112b7 100644
> --- a/drivers/mmc/host/sunxi-mmc.c
> +++ b/drivers/mmc/host/sunxi-mmc.c
> @@ -244,6 +244,7 @@ struct sunxi_idma_des {
>
> struct sunxi_mmc_cfg {
> u32 idma_des_size_bits;
> + u32 idma_des_shift;
> const struct sunxi_mmc_clk_delay *clk_delays;
>
> /* does the IP block support autocalibration? */
> @@ -343,7 +344,7 @@ static int sunxi_mmc_init_host(struct sunxi_mmc_host *host)
> /* Enable CEATA support */
> mmc_writel(host, REG_FUNS, SDXC_CEATA_ON);
> /* Set DMA descriptor list base address */
> - mmc_writel(host, REG_DLBA, host->sg_dma);
> + mmc_writel(host, REG_DLBA, host->sg_dma >> host->cfg->idma_des_shift);
>
> rval = mmc_readl(host, REG_GCTRL);
> rval |= SDXC_INTERRUPT_ENABLE_BIT;
> @@ -373,8 +374,10 @@ static void sunxi_mmc_init_idma_des(struct sunxi_mmc_host *host,
>
> next_desc += sizeof(struct sunxi_idma_des);
> pdes[i].buf_addr_ptr1 =
> - cpu_to_le32(sg_dma_address(&data->sg[i]));
> - pdes[i].buf_addr_ptr2 = cpu_to_le32((u32)next_desc);
> + cpu_to_le32(sg_dma_address(&data->sg[i]) >>
> + host->cfg->idma_des_shift);
> + pdes[i].buf_addr_ptr2 = cpu_to_le32((u32)next_desc >>
> + host->cfg->idma_des_shift);
I think you should cast after the shift, otherwise you lose the ability
to run above 4 GB. This won't be a problem at the moment, since we still
use the default 32-bit DMA mask, but might bite us later.
Otherwise this patch looks fine, and works on the H616 as well.
Cheers,
Andre
> }
>
> pdes[0].config |= cpu_to_le32(SDXC_IDMAC_DES0_FD);
> @@ -1178,6 +1181,23 @@ static const struct sunxi_mmc_cfg sun50i_a64_emmc_cfg = {
> .needs_new_timings = true,
> };
>
> +static const struct sunxi_mmc_cfg sun50i_a100_cfg = {
> + .idma_des_size_bits = 16,
> + .idma_des_shift = 2,
> + .clk_delays = NULL,
> + .can_calibrate = true,
> + .mask_data0 = true,
> + .needs_new_timings = true,
> +};
> +
> +static const struct sunxi_mmc_cfg sun50i_a100_emmc_cfg = {
> + .idma_des_size_bits = 13,
> + .idma_des_shift = 2,
> + .clk_delays = NULL,
> + .can_calibrate = true,
> + .needs_new_timings = true,
> +};
> +
> static const struct of_device_id sunxi_mmc_of_match[] = {
> { .compatible = "allwinner,sun4i-a10-mmc", .data = &sun4i_a10_cfg },
> { .compatible = "allwinner,sun5i-a13-mmc", .data = &sun5i_a13_cfg },
> @@ -1186,6 +1206,8 @@ static const struct of_device_id sunxi_mmc_of_match[] = {
> { .compatible = "allwinner,sun9i-a80-mmc", .data = &sun9i_a80_cfg },
> { .compatible = "allwinner,sun50i-a64-mmc", .data = &sun50i_a64_cfg },
> { .compatible = "allwinner,sun50i-a64-emmc", .data = &sun50i_a64_emmc_cfg },
> + { .compatible = "allwinner,sun50i-a100-mmc", .data = &sun50i_a100_cfg },
> + { .compatible = "allwinner,sun50i-a100-emmc", .data = &sun50i_a100_emmc_cfg },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, sunxi_mmc_of_match);
>
Powered by blists - more mailing lists