linux-kernel - [PATCH v4 0/5] Add GPIO support for MStar/SigmaStar ARMv7

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201129110803.2461700-1-daniel@0x0f.com>
Date:   Sun, 29 Nov 2020 20:07:57 +0900
From:   Daniel Palmer <daniel@...f.com>
To:     soc@...nel.org, linux-gpio@...r.kernel.org
Cc:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, linus.walleij@...aro.org,
        robh@...nel.org, w@....eu, daniel@...f.com
Subject: [PATCH v4 0/5] Add GPIO support for MStar/SigmaStar ARMv7

At the moment the MStar/SigmaStar support is only really
capable of shell from an initramfs and not much else.

Most of the interesting drivers are blocked on clock and pinctrl
drivers and those are going to take me a little while to get cleaned
up.

Clock and pinctrl aren't needed for basic GPIO to work (all pins
start off as GPIOs..) and it makes it possible to actually do something
so this series adds everything that is needed for the main GPIO
block in these chips.

Changes since v3:
- Remove unneeded "gpio-ranges-group-names" property from binding yaml.

Changes since v2:

- Numerous style and code cleanups as suggested by Andy Shevchenko,
  Linus Walleij, Marc Zyngier and Rob Herring.

- Pad names moved out of the binding header because they are no longer
  needed there. The pin/pad numbers are still there as I couldn't think
  of a better way to do this. meson8b-gpio.h seems to be similar.

Changes since v1:

- Moves the binding header commit before the yaml commit
  
- Fixes the license on the binding header to include BSD-2-Clause

- The driver has been reworked to use the gpiolib irqchip functionality
  as suggested by Linus[0]. I think I got this right. The gpio controller
  doesn't actually do anything with interrupts itself.. It just happens
  to have 4 lines that are also wired to lines on one of the interrupt
  controllers.

- Now that the driver is an interrupt controller in it's own right for
  the gpio lines that have associated interrupts the binding description
  has been updated to add the interrupt-controller bits and remove the
  description of the interrupt-names that described how the interrupts
  used to be passed in.

Daniel Palmer (5):
  dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
  dt-bindings: gpio: Binding for MStar MSC313 GPIO controller
  gpio: msc313: MStar MSC313 GPIO driver
  ARM: mstar: Add gpio controller to MStar base dtsi
  ARM: mstar: Fill in GPIO controller properties for infinity

 .../bindings/gpio/mstar,msc313-gpio.yaml      |  59 +++
 MAINTAINERS                                   |   3 +
 arch/arm/boot/dts/mstar-infinity.dtsi         |   7 +
 arch/arm/boot/dts/mstar-v7.dtsi               |  10 +
 drivers/gpio/Kconfig                          |  11 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-msc313.c                    | 460 ++++++++++++++++++
 include/dt-bindings/gpio/msc313-gpio.h        |  53 ++
 8 files changed, 604 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/mstar,msc313-gpio.yaml
 create mode 100644 drivers/gpio/gpio-msc313.c
 create mode 100644 include/dt-bindings/gpio/msc313-gpio.h

-- 
2.29.2