linux-kernel - Re: [PATCH v2 15/18] arm: dts: owl-s500-roseapplepi: Use UART clock from CMU

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20201129182620.GE696261@BV030612LT>
Date:   Sun, 29 Nov 2020 20:26:20 +0200
From:   Cristian Ciocaltea <cristian.ciocaltea@...il.com>
To:     Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Cc:     Rob Herring <robh+dt@...nel.org>,
        Andreas Färber <afaerber@...e.de>,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-actions@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 15/18] arm: dts: owl-s500-roseapplepi: Use UART clock
 from CMU

On Sat, Nov 28, 2020 at 01:06:50PM +0530, Manivannan Sadhasivam wrote:
> On Fri, Nov 20, 2020 at 01:56:09AM +0200, Cristian Ciocaltea wrote:
> > Remove the UART fixed clock for RoseapplePi SBC and switch to using
> > the clock provided by CMU.
> > 
> > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...il.com>
> 
> Please club this patch with the one adding CMU clock.

Done.

Thanks,
Cristi

> Thanks,
> Mani
> 
> > ---
> >  arch/arm/boot/dts/owl-s500-roseapplepi.dts | 7 -------
> >  1 file changed, 7 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> > index a2087e617cb2..800edf5d2d12 100644
> > --- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> > +++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> > @@ -25,12 +25,6 @@ memory@0 {
> >  		device_type = "memory";
> >  		reg = <0x0 0x80000000>; /* 2GB */
> >  	};
> > -
> > -	uart2_clk: uart2-clk {
> > -		compatible = "fixed-clock";
> > -		clock-frequency = <921600>;
> > -		#clock-cells = <0>;
> > -	};
> >  };
> >  
> >  &twd_timer {
> > @@ -43,5 +37,4 @@ &timer {
> >  
> >  &uart2 {
> >  	status = "okay";
> > -	clocks = <&uart2_clk>;
> >  };
> > -- 
> > 2.29.2
> >