[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1606714984-16593-2-git-send-email-yash.shah@sifive.com>
Date: Mon, 30 Nov 2020 11:13:04 +0530
From: Yash Shah <yash.shah@...ive.com>
To: linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
devicetree@...r.kernel.org
Cc: bp@...e.de, anup@...infault.org, Jonathan.Cameron@...wei.com,
wsa@...nel.org, sam@...nborg.org, aou@...s.berkeley.edu,
palmer@...belt.com, paul.walmsley@...ive.com, robh+dt@...nel.org,
sagar.kadam@...ive.com, sachin.ghadi@...ive.com,
Yash Shah <yash.shah@...ive.com>
Subject: [PATCH v2 2/2] RISC-V: sifive_l2_cache: Update L2 cache driver to support SiFive FU740
SiFive FU740 has 4 ECC interrupt sources as compared to 3 in FU540.
Update the L2 cache controller driver to support this additional
interrupt in case of FU740-C000 chip.
Signed-off-by: Yash Shah <yash.shah@...ive.com>
---
drivers/soc/sifive/sifive_l2_cache.c | 49 +++++++++++++++++++++++++++++++-----
1 file changed, 43 insertions(+), 6 deletions(-)
diff --git a/drivers/soc/sifive/sifive_l2_cache.c b/drivers/soc/sifive/sifive_l2_cache.c
index 44d7e19..4e5e841 100644
--- a/drivers/soc/sifive/sifive_l2_cache.c
+++ b/drivers/soc/sifive/sifive_l2_cache.c
@@ -17,6 +17,10 @@
#define SIFIVE_L2_DIRECCFIX_HIGH 0x104
#define SIFIVE_L2_DIRECCFIX_COUNT 0x108
+#define SIFIVE_L2_DIRECCFAIL_LOW 0x120
+#define SIFIVE_L2_DIRECCFAIL_HIGH 0x124
+#define SIFIVE_L2_DIRECCFAIL_COUNT 0x128
+
#define SIFIVE_L2_DATECCFIX_LOW 0x140
#define SIFIVE_L2_DATECCFIX_HIGH 0x144
#define SIFIVE_L2_DATECCFIX_COUNT 0x148
@@ -29,7 +33,7 @@
#define SIFIVE_L2_WAYENABLE 0x08
#define SIFIVE_L2_ECCINJECTERR 0x40
-#define SIFIVE_L2_MAX_ECCINTR 3
+#define SIFIVE_L2_MAX_ECCINTR 4
static void __iomem *l2_base;
static int g_irq[SIFIVE_L2_MAX_ECCINTR];
@@ -37,6 +41,7 @@ static struct riscv_cacheinfo_ops l2_cache_ops;
enum {
DIR_CORR = 0,
+ DIR_UNCORR,
DATA_CORR,
DATA_UNCORR,
};
@@ -93,6 +98,7 @@ static void l2_config_read(void)
static const struct of_device_id sifive_l2_ids[] = {
{ .compatible = "sifive,fu540-c000-ccache" },
+ { .compatible = "sifive,fu740-c000-ccache" },
{ /* end of table */ },
};
@@ -155,6 +161,15 @@ static irqreturn_t l2_int_handler(int irq, void *device)
atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_CE,
"DirECCFix");
}
+ if (irq == g_irq[DIR_UNCORR]) {
+ add_h = readl(l2_base + SIFIVE_L2_DIRECCFAIL_HIGH);
+ add_l = readl(l2_base + SIFIVE_L2_DIRECCFAIL_LOW);
+ /* Reading this register clears the DirFail interrupt sig */
+ readl(l2_base + SIFIVE_L2_DIRECCFAIL_COUNT);
+ atomic_notifier_call_chain(&l2_err_chain, SIFIVE_L2_ERR_TYPE_UE,
+ "DirECCFail");
+ panic("L2CACHE: DirFail @ 0x%08X.%08X\n", add_h, add_l);
+ }
if (irq == g_irq[DATA_CORR]) {
add_h = readl(l2_base + SIFIVE_L2_DATECCFIX_HIGH);
add_l = readl(l2_base + SIFIVE_L2_DATECCFIX_LOW);
@@ -179,9 +194,9 @@ static irqreturn_t l2_int_handler(int irq, void *device)
static int __init sifive_l2_init(void)
{
+ int i, k, rc, intr_num, offset = 0;
struct device_node *np;
struct resource res;
- int i, rc;
np = of_find_matching_node(NULL, sifive_l2_ids);
if (!np)
@@ -194,11 +209,33 @@ static int __init sifive_l2_init(void)
if (!l2_base)
return -ENOMEM;
- for (i = 0; i < SIFIVE_L2_MAX_ECCINTR; i++) {
- g_irq[i] = irq_of_parse_and_map(np, i);
- rc = request_irq(g_irq[i], l2_int_handler, 0, "l2_ecc", NULL);
+ intr_num = of_property_count_u32_elems(np, "interrupts");
+ if (!intr_num) {
+ pr_err("L2CACHE: no interrupts property\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Only FU540 have 3 interrupts. Rest all other variants have
+ * 4 interrupts (+dirfail). Therefore offset is required to skip
+ * 'dirfail' interrupt entry in case of FU540
+ */
+ if (of_device_is_compatible(np, "sifive,fu540-c000-ccache"))
+ offset = 1;
+
+ g_irq[0] = irq_of_parse_and_map(np, 0);
+ rc = request_irq(g_irq[0], l2_int_handler, 0, "l2_ecc", NULL);
+ if (rc) {
+ pr_err("L2CACHE: Could not request IRQ %d\n", g_irq[0]);
+ return rc;
+ }
+
+ for (i = 1; i < intr_num; i++) {
+ k = i + offset;
+ g_irq[k] = irq_of_parse_and_map(np, i);
+ rc = request_irq(g_irq[k], l2_int_handler, 0, "l2_ecc", NULL);
if (rc) {
- pr_err("L2CACHE: Could not request IRQ %d\n", g_irq[i]);
+ pr_err("L2CACHE: Could not request IRQ %d\n", g_irq[k]);
return rc;
}
}
--
2.7.4
Powered by blists - more mailing lists