| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201201024052.GD43403@laputa>
Date: Tue, 1 Dec 2020 11:40:52 +0900
From: AKASHI Takahiro <takahiro.akashi@...aro.org>
To: Adrian Hunter <adrian.hunter@...el.com>
Cc: ulf.hansson@...aro.org, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org, ben.chuang@...esyslogic.com.tw,
greg.tu@...esyslogic.com.tw
Subject: Re: [RFC PATCH v3.1 20/27] mmc: sdhci-uhs2: add request() and others
On Thu, Nov 26, 2020 at 10:18:44AM +0200, Adrian Hunter wrote:
> On 6/11/20 4:27 am, AKASHI Takahiro wrote:
> > This is a sdhci version of mmc's request operation.
> > It covers both UHS-I and UHS-II.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi@...aro.org>
> > ---
> > drivers/mmc/host/sdhci-uhs2.c | 529 ++++++++++++++++++++++++++++++++++
> > drivers/mmc/host/sdhci.c | 93 +++---
> > drivers/mmc/host/sdhci.h | 21 ++
> > 3 files changed, 610 insertions(+), 33 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
> > index d8afb99a9918..36e52553977a 100644
> > --- a/drivers/mmc/host/sdhci-uhs2.c
> > +++ b/drivers/mmc/host/sdhci-uhs2.c
> > @@ -13,6 +13,7 @@
> > #include <linux/delay.h>
> > #include <linux/ktime.h>
> > #include <linux/module.h>
> > +#include <linux/mmc/mmc.h>
> >
> > #include "sdhci.h"
> > #include "sdhci-uhs2.h"
> > @@ -394,6 +395,27 @@ static int sdhci_uhs2_check_dormant(struct sdhci_host *host)
> > return 0;
> > }
> >
> > +/* TODO: move them to a header */
> > +#if IS_REACHABLE(CONFIG_LEDS_CLASS)
> > +static inline void sdhci_led_activate(struct sdhci_host *host)
> > +{
> > +}
> > +
> > +static inline void sdhci_led_deactivate(struct sdhci_host *host)
> > +{
> > +}
> > +#else
> > +static inline void sdhci_led_activate(struct sdhci_host *host)
> > +{
> > + __sdhci_led_activate(host);
> > +}
> > +
> > +static inline void sdhci_led_deactivate(struct sdhci_host *host)
> > +{
> > + __sdhci_led_deactivate(host);
> > +}
> > +#endif
>
> Unless you need LED support, let's drop it
Okay
> > +
> > /*****************************************************************************\
> > * *
> > * MMC callbacks *
> > @@ -523,6 +545,512 @@ static int sdhci_uhs2_set_reg(struct mmc_host *mmc, enum uhs2_act act)
> > return err;
> > }
> >
> > +static bool sdhci_uhs2_send_command(struct sdhci_host *host,
> > + struct mmc_command *cmd);
> > +static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host,
> > + struct mmc_command *cmd,
> > + unsigned long flags);
>
> Always order functions so that early function declarations are not needed
Will try.
> > +
> > +void sdhci_uhs2_request(struct mmc_host *mmc, struct mmc_request *mrq)
> > +{
> > + struct sdhci_host *host = mmc_priv(mmc);
> > + struct mmc_command *cmd;
> > + unsigned long flags;
> > + bool present;
> > +
> > + /* FIXME: check more flags? */
> > + if (!host->mmc->flags & MMC_UHS2_SUPPORT) {
>
>
> if (sdhci_uhs2_mode(host))
>
> > + sdhci_request(mmc, mrq);
> > + return;
> > + }
> > +
> > + /* Firstly check card presence */
> > + present = mmc->ops->get_cd(mmc);
>
> Checking CD here is another legacy hangover. Should be able to check the
> bus power instead. i.e. if the card has been removed, the bus power (bit-0
> Power Control reg) should get set to 0. That can be checked under spin lock.
Replace it with check against SDHCI_POWER_ON.
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > +
> > + sdhci_led_activate(host);
>
> Drop support for sdhci LEDs unless yoy are using them
Sure
> > +
> > + if (sdhci_present_error(host, mrq->cmd, present))
> > + goto out_finish;
> > +
> > + cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
>
> UHS2 doesn't use CMD23 does it?
I don't know. Will replace it with
cmd = mrq->sbc ? mrq->sbc : mrq->cmd;
> > +
> > + if (!sdhci_uhs2_send_command_retry(host, cmd, flags))
>
> Don't use sdhci_uhs2_send_command_retry. sdhci_send_command_retry is again
> dealing with legacy hangover. The inhibit bits should not be set. If they
> are it can be an error immediately. So just use sdhci_uhs2_send_commend()
Will follow your suggestion.
> > + goto out_finish;
> > +
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + return;
> > +
> > +out_finish:
> > + sdhci_finish_mrq(host, mrq);
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request);
> > +
> > +int sdhci_uhs2_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq)
>
> Should end up being able simply to call sdhci_uhs2_request (or vice versa)
Well, there is one difference,i.e. whether we should check "card presence"
(or POWER_ON), isn't it?
I think we should preserve this difference.
Or we may simply remove _atomic version since there is no user for now.
Which do you prefer?
> > +{
> > + struct sdhci_host *host = mmc_priv(mmc);
> > + struct mmc_command *cmd;
> > + unsigned long flags;
> > + int ret = 0;
> > +
> > + if (!host->mmc->flags & MMC_UHS2_SUPPORT)
> > + return sdhci_request_atomic(mmc, mrq);
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > +
> > + if (sdhci_present_error(host, mrq->cmd, true)) {
> > + sdhci_finish_mrq(host, mrq);
> > + goto out_finish;
> > + }
> > +
> > + cmd = sdhci_manual_cmd23(host, mrq) ? mrq->sbc : mrq->cmd;
> > +
> > + /*
> > + * The HSQ may send a command in interrupt context without polling
> > + * the busy signaling, which means we should return BUSY if controller
> > + * has not released inhibit bits to allow HSQ trying to send request
> > + * again in non-atomic context. So we should not finish this request
> > + * here.
> > + */
> > + if (!sdhci_uhs2_send_command(host, cmd))
> > + ret = -EBUSY;
> > + else
> > + sdhci_led_activate(host);
> > +
> > +out_finish:
> > + spin_unlock_irqrestore(&host->lock, flags);
> > + return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_uhs2_request_atomic);
> > +
> > +/*****************************************************************************\
> > + * *
> > + * Core functions *
> > + * *
> > +\*****************************************************************************/
> > +
> > +static void sdhci_uhs2_prepare_data(struct sdhci_host *host,
> > + struct mmc_command *cmd)
> > +{
> > + struct mmc_data *data = cmd->data;
> > +
> > + sdhci_initialize_data(host, data);
> > +
> > + sdhci_prepare_dma(host, data);
> > +
> > + sdhci_writew(host, data->blksz, SDHCI_UHS2_BLOCK_SIZE);
> > + sdhci_writew(host, data->blocks, SDHCI_UHS2_BLOCK_COUNT);
> > +}
> > +
> > +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
> > +static void sdhci_uhs2_external_dma_prepare_data(struct sdhci_host *host,
> > + struct mmc_command *cmd)
> > +{
> > + if (!sdhci_external_dma_setup(host, cmd)) {
> > + __sdhci_external_dma_prepare_data(host, cmd);
> > + } else {
> > + sdhci_external_dma_release(host);
> > + pr_err("%s: Cannot use external DMA, switch to the DMA/PIO which standard SDHCI provides.\n",
> > + mmc_hostname(host->mmc));
> > + sdhci_uhs2_prepare_data(host, cmd);
> > + }
> > +}
> > +#else
> > +static inline void sdhci_uhs2_external_dma_prepare_data(struct sdhci_host *host,
> > + struct mmc_command *cmd)
> > +{
> > + /* This should never happen */
> > + WARN_ON_ONCE(1);
> > +}
> > +
> > +static inline void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
> > + struct mmc_command *cmd)
> > +{
> > +}
> > +#endif /* CONFIG_MMC_SDHCI_EXTERNAL_DMA */
>
> Let's start without support for external DMA - unless you need it
Okay
> > +
> > +static void sdhci_uhs2_finish_data(struct sdhci_host *host)
> > +{
> > + struct mmc_data *data = host->data;
> > +
> > + __sdhci_finish_data_common(host);
> > +
> > + /*
> > + * FIXME: Is this condition needed?
> > + if (host->mmc->flags & MMC_UHS2_INITIALIZED)
> > + */
> > + __sdhci_finish_mrq(host, data->mrq);
> > +}
> > +
> > +static void sdhci_uhs2_set_transfer_mode(struct sdhci_host *host,
> > + struct mmc_command *cmd)
> > +{
> > + u16 mode;
> > + struct mmc_data *data = cmd->data;
> > + u16 arg;
> > +
> > + if (!data) {
> > + /* clear Auto CMD settings for no data CMDs */
> > + arg = cmd->uhs2_cmd->arg;
> > + if ((((arg & 0xF) << 8) | ((arg >> 8) & 0xFF)) ==
> > + UHS2_DEV_CMD_TRANS_ABORT) {
> > + mode = 0;
> > + } else {
> > + mode = sdhci_readw(host, SDHCI_UHS2_TRANS_MODE);
> > + if (cmd->opcode == MMC_STOP_TRANSMISSION ||
> > + cmd->opcode == MMC_ERASE)
> > + mode |= SDHCI_UHS2_TRNS_WAIT_EBSY;
> > + else
> > + /* send status mode */
> > + if (cmd->opcode == MMC_SEND_STATUS)
> > + mode = 0;
> > + }
> > +
> > + if (IS_ENABLED(CONFIG_MMC_DEBUG))
> > + DBG("UHS2 no data trans mode is 0x%x.\n", mode);
> > +
> > + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE);
> > + return;
> > + }
> > +
> > + WARN_ON(!host->data);
> > +
> > + mode = SDHCI_UHS2_TRNS_BLK_CNT_EN | SDHCI_UHS2_TRNS_WAIT_EBSY;
> > + if (data->flags & MMC_DATA_WRITE)
> > + mode |= SDHCI_UHS2_TRNS_DATA_TRNS_WRT;
> > +
> > + if (data->blocks == 1 &&
> > + data->blksz != 512 &&
> > + cmd->opcode != MMC_READ_SINGLE_BLOCK &&
> > + cmd->opcode != MMC_WRITE_BLOCK) {
> > + mode &= ~SDHCI_UHS2_TRNS_BLK_CNT_EN;
> > + mode |= SDHCI_UHS2_TRNS_BLK_BYTE_MODE;
> > + }
> > +
> > + if (host->flags & SDHCI_REQ_USE_DMA)
> > + mode |= SDHCI_UHS2_TRNS_DMA;
> > +
> > + if ((host->mmc->flags & MMC_UHS2_2L_HD) && !cmd->uhs2_tmode0_flag)
> > + mode |= SDHCI_UHS2_TRNS_2L_HD;
> > +
> > + sdhci_writew(host, mode, SDHCI_UHS2_TRANS_MODE);
> > +
> > + if (IS_ENABLED(CONFIG_MMC_DEBUG))
> > + DBG("UHS2 trans mode is 0x%x.\n", mode);
> > +}
> > +
> > +static void __sdhci_uhs2_send_command(struct sdhci_host *host,
> > + struct mmc_command *cmd)
> > +{
> > + int i, j;
> > + int cmd_reg;
> > +
> > + if (host->mmc->flags & MMC_UHS2_INITIALIZED) {
> > + if (!cmd->uhs2_cmd) {
> > + pr_err("%s: fatal error, no uhs2_cmd!\n",
> > + mmc_hostname(host->mmc));
> > + return;
> > + }
> > + }
> > +
> > + i = 0;
> > + sdhci_writel(host,
> > + ((u32)cmd->uhs2_cmd->arg << 16) |
> > + (u32)cmd->uhs2_cmd->header,
> > + SDHCI_UHS2_CMD_PACKET + i);
> > + i += 4;
> > +
> > + /*
> > + * Per spec, playload (config) should be MSB before sending out.
> > + * But we don't need convert here because had set payload as
> > + * MSB when preparing config read/write commands.
> > + */
> > + for (j = 0; j < cmd->uhs2_cmd->payload_len / sizeof(u32); j++) {
> > + sdhci_writel(host, *(cmd->uhs2_cmd->payload + j),
> > + SDHCI_UHS2_CMD_PACKET + i);
> > + i += 4;
> > + }
> > +
> > + for ( ; i < SDHCI_UHS2_CMD_PACK_MAX_LEN; i += 4)
> > + sdhci_writel(host, 0, SDHCI_UHS2_CMD_PACKET + i);
> > +
> > + if (IS_ENABLED(CONFIG_MMC_DEBUG)) {
> > + DBG("UHS2 CMD packet_len = %d.\n", cmd->uhs2_cmd->packet_len);
> > + for (i = 0; i < cmd->uhs2_cmd->packet_len; i++)
> > + DBG("UHS2 CMD_PACKET[%d] = 0x%x.\n", i,
> > + sdhci_readb(host, SDHCI_UHS2_CMD_PACKET + i));
> > + }
> > +
> > + cmd_reg = cmd->uhs2_cmd->packet_len <<
> > + SDHCI_UHS2_COMMAND_PACK_LEN_SHIFT;
> > + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC)
> > + cmd_reg |= SDHCI_UHS2_COMMAND_DATA;
> > + if (cmd->opcode == MMC_STOP_TRANSMISSION)
> > + cmd_reg |= SDHCI_UHS2_COMMAND_CMD12;
> > +
> > + /* UHS2 Native ABORT */
> > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) &&
> > + ((((cmd->uhs2_cmd->arg & 0xF) << 8) |
> > + ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) == UHS2_DEV_CMD_TRANS_ABORT))
> > + cmd_reg |= SDHCI_UHS2_COMMAND_TRNS_ABORT;
> > +
> > + /* UHS2 Native DORMANT */
> > + if ((cmd->uhs2_cmd->header & UHS2_NATIVE_PACKET) &&
> > + ((((cmd->uhs2_cmd->arg & 0xF) << 8) |
> > + ((cmd->uhs2_cmd->arg >> 8) & 0xFF)) ==
> > + UHS2_DEV_CMD_GO_DORMANT_STATE))
> > + cmd_reg |= SDHCI_UHS2_COMMAND_DORMANT;
> > +
> > + DBG("0x%x is set to UHS2 CMD register.\n", cmd_reg);
> > +
> > + sdhci_writew(host, cmd_reg, SDHCI_UHS2_COMMAND);
> > +}
> > +
> > +static bool sdhci_uhs2_send_command(struct sdhci_host *host,
> > + struct mmc_command *cmd)
> > +{
> > + int flags;
> > + u32 mask;
> > + unsigned long timeout;
> > +
> > + /* FIXME: Is this check necessary? */
>
> No
Will drop it.
>
> > + if (!(host->mmc->flags & MMC_UHS2_SUPPORT))
> > + return sdhci_send_command(host, cmd);
> > +
> > + WARN_ON(host->cmd);
> > +
> > + /* Initially, a command has no error */
> > + cmd->error = 0;
> > +
> > + if ((host->quirks2 & SDHCI_QUIRK2_STOP_WITH_TC) &&
>
> Quirk
Will drop it.
>
> > + cmd->opcode == MMC_STOP_TRANSMISSION)
> > + cmd->flags |= MMC_RSP_BUSY;
> > +
> > + mask = SDHCI_CMD_INHIBIT;
> > + if (sdhci_data_line_cmd(cmd))
> > + mask |= SDHCI_DATA_INHIBIT;
>
> Command inhibit for data is not supported by UHS2
Will drop it.
> > +
> > + /* We shouldn't wait for data inihibit for stop commands, even
> > + though they might use busy signaling */
> > + if (cmd->mrq->data && (cmd == cmd->mrq->data->stop))
> > + mask &= ~SDHCI_DATA_INHIBIT;
>
> Ditto
Will drop it.
>
> > +
> > + if (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask)
> > + return false;
> > +
> > + host->cmd = cmd;
> > + host->data_timeout = 0;
> > + if (sdhci_data_line_cmd(cmd)) {
> > + WARN_ON(host->data_cmd);
> > + host->data_cmd = cmd;
> > + __sdhci_uhs2_set_timeout(host);
> > + }
> > +
> > + if (cmd->data) {
> > + if (host->use_external_dma)
> > + sdhci_uhs2_external_dma_prepare_data(host, cmd);
>
> To start with, let's drop support for external DMA with UHS2. i.e. disallow
> UHS2 mode if external DMA is enabled
Okay.
I will add a check against host->use_external in uhs2_do_detect_init().
>
> > + else
> > + sdhci_uhs2_prepare_data(host, cmd);
> > + }
> > +
> > + sdhci_uhs2_set_transfer_mode(host, cmd);
> > +
> > + if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
> > + WARN_ONCE(1, "Unsupported response type!\n");
> > + /*
> > + * This does not happen in practice because 136-bit response
> > + * commands never have busy waiting, so rather than complicate
> > + * the error path, just remove busy waiting and continue.
> > + */
> > + cmd->flags &= ~MMC_RSP_BUSY;
> > + }
> > +
> > + if (!(cmd->flags & MMC_RSP_PRESENT))
> > + flags = SDHCI_CMD_RESP_NONE;
> > + else if (cmd->flags & MMC_RSP_136)
> > + flags = SDHCI_CMD_RESP_LONG;
> > + else if (cmd->flags & MMC_RSP_BUSY)
> > + flags = SDHCI_CMD_RESP_SHORT_BUSY;
> > + else
> > + flags = SDHCI_CMD_RESP_SHORT;
> > +
> > + if (cmd->flags & MMC_RSP_CRC)
> > + flags |= SDHCI_CMD_CRC;
> > + if (cmd->flags & MMC_RSP_OPCODE)
> > + flags |= SDHCI_CMD_INDEX;
> > +
> > + /* CMD19 is special in that the Data Present Select should be set */
> > + if (cmd->data || cmd->opcode == MMC_SEND_TUNING_BLOCK ||
> > + cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)
>
> No tuning commands fo UHS2
>
> > + flags |= SDHCI_CMD_DATA;
>
> flags are never used?
Good catch. Will drop it.
> > +
> > + timeout = jiffies;
> > + if (host->data_timeout)
> > + timeout += nsecs_to_jiffies(host->data_timeout);
> > + else if (!cmd->data && cmd->busy_timeout > 9000)
> > + timeout += DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ;
> > + else
> > + timeout += 10 * HZ;
> > + sdhci_mod_timer(host, cmd->mrq, timeout);
> > +
> > + if (host->use_external_dma)
> > + sdhci_external_dma_pre_transfer(host, cmd);
> > +
> > + __sdhci_uhs2_send_command(host, cmd);
> > +
> > + return true;
> > +}
> > +
> > +static bool sdhci_uhs2_send_command_retry(struct sdhci_host *host,
> > + struct mmc_command *cmd,
> > + unsigned long flags)
>
> Can probably get rid of sdhci_uhs2_send_command_retry
Sure
> > + __releases(host->lock)
> > + __acquires(host->lock)
> > +{
> > + struct mmc_command *deferred_cmd = host->deferred_cmd;
> > + int timeout = 10; /* Approx. 10 ms */
> > + bool present;
> > +
> > + while (!sdhci_uhs2_send_command(host, cmd)) {
> > + if (!timeout--) {
> > + pr_err("%s: Controller never released inhibit bit(s).\n",
> > + mmc_hostname(host->mmc));
> > + sdhci_dumpregs(host);
> > + cmd->error = -EIO;
> > + return false;
> > + }
> > +
> > + spin_unlock_irqrestore(&host->lock, flags);
> > +
> > + usleep_range(1000, 1250);
> > +
> > + present = host->mmc->ops->get_cd(host->mmc);
> > +
> > + spin_lock_irqsave(&host->lock, flags);
> > +
> > + /* A deferred command might disappear, handle that */
> > + if (cmd == deferred_cmd && cmd != host->deferred_cmd)
> > + return true;
> > +
> > + if (sdhci_present_error(host, cmd, present))
> > + return false;
> > + }
> > +
> > + if (cmd == host->deferred_cmd)
> > + host->deferred_cmd = NULL;
> > +
> > + return true;
> > +}
> > +
> > +static void __sdhci_uhs2_finish_command(struct sdhci_host *host)
> > +{
> > + struct mmc_command *cmd = host->cmd;
> > + u8 resp;
> > + u8 ecode;
> > + bool bReadA0 = 0;
> > + int i;
> > +
> > + if (host->mmc->flags & MMC_UHS2_INITIALIZED) {
> > + resp = sdhci_readb(host, SDHCI_UHS2_RESPONSE + 2);
> > + if (resp & UHS2_RES_NACK_MASK) {
> > + ecode = (resp >> UHS2_RES_ECODE_POS) &
> > + UHS2_RES_ECODE_MASK;
> > + pr_err("%s: NACK is got, ECODE=0x%x.\n",
> > + mmc_hostname(host->mmc), ecode);
> > + }
> > + bReadA0 = 1;
> > + }
> > +
> > + if (cmd->uhs2_resp &&
> > + cmd->uhs2_resp_len && cmd->uhs2_resp_len <= 20) {
> > + /* Get whole response of some native CCMD, like
> > + * DEVICE_INIT, ENUMERATE.
> > + */
> > + for (i = 0; i < cmd->uhs2_resp_len; i++)
> > + cmd->uhs2_resp[i] =
> > + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i);
> > + } else {
> > + /* Get SD CMD response and Payload for some read
> > + * CCMD, like INQUIRY_CFG.
> > + */
> > + /* Per spec (p136), payload field is divided into
> > + * a unit of DWORD and transmission order within
> > + * a DWORD is big endian.
> > + */
> > + if (!bReadA0)
> > + sdhci_readl(host, SDHCI_UHS2_RESPONSE);
> > + for (i = 4; i < 20; i += 4) {
> > + cmd->resp[i / 4 - 1] =
> > + (sdhci_readb(host,
> > + SDHCI_UHS2_RESPONSE + i) << 24) |
> > + (sdhci_readb(host,
> > + SDHCI_UHS2_RESPONSE + i + 1)
> > + << 16) |
> > + (sdhci_readb(host,
> > + SDHCI_UHS2_RESPONSE + i + 2)
> > + << 8) |
> > + sdhci_readb(host, SDHCI_UHS2_RESPONSE + i + 3);
> > + }
> > + }
> > +}
> > +
> > +static void sdhci_uhs2_finish_command(struct sdhci_host *host)
> > +{
> > + struct mmc_command *cmd = host->cmd;
> > +
> > + /* FIXME: Is this check necessary? */
> > + if (!(host->mmc->flags & MMC_UHS2_SUPPORT)) {
> > + sdhci_finish_command(host);
> > + return;
> > + }
> > +
> > + __sdhci_uhs2_finish_command(host);
> > +
> > + host->cmd = NULL;
> > +
> > + if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd)
> > + mmc_command_done(host->mmc, cmd->mrq);
> > +
> > + /*
> > + * The host can send and interrupt when the busy state has
> > + * ended, allowing us to wait without wasting CPU cycles.
> > + * The busy signal uses DAT0 so this is similar to waiting
> > + * for data to complete.
> > + *
> > + * Note: The 1.0 specification is a bit ambiguous about this
> > + * feature so there might be some problems with older
> > + * controllers.
> > + */
> > + if (cmd->flags & MMC_RSP_BUSY) {
> > + if (cmd->data) {
> > + DBG("Cannot wait for busy signal when also doing a data transfer");
> > + } else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) &&
> > + cmd == host->data_cmd) {
> > + /* Command complete before busy is ended */
> > + return;
> > + }
> > + }
> > +
> > + /* Finished CMD23, now send actual command. */
>
> UHS2 doesn't use CMD23 does it?
Should we remove any code in this function, other than this comment?
-Takahiro Akashi
> > + if (cmd == cmd->mrq->sbc) {
> > + if (!sdhci_uhs2_send_command(host, cmd->mrq->cmd)) {
> > + WARN_ON(host->deferred_cmd);
> > + host->deferred_cmd = cmd->mrq->cmd;
> > + }
> > + } else {
> > +
> > + /* Processed actual command. */
> > + if (host->data && host->data_early)
> > + sdhci_uhs2_finish_data(host);
> > +
> > + if (!cmd->data)
> > + __sdhci_finish_mrq(host, cmd->mrq);
> > + }
> > +}
> > +
> > /*****************************************************************************\
> > * *
> > * Driver init/exit *
> > @@ -691,6 +1219,7 @@ static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
> > host->mmc_host_ops.start_signal_voltage_switch =
> > sdhci_uhs2_start_signal_voltage_switch;
> > host->mmc_host_ops.set_ios = sdhci_uhs2_set_ios;
> > + host->mmc_host_ops.request = sdhci_uhs2_request;
> >
> > if (!host->mmc_host_ops.uhs2_detect_init)
> > host->mmc_host_ops.uhs2_detect_init = sdhci_uhs2_do_detect_init;
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index becb228330af..a9f5449bddcc 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -48,8 +48,6 @@
> > static unsigned int debug_quirks = 0;
> > static unsigned int debug_quirks2;
> >
> > -static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
> > -
> > void sdhci_dumpregs(struct sdhci_host *host)
> > {
> > SDHCI_DUMP("============ SDHCI REGISTER DUMP ===========\n");
> > @@ -148,10 +146,13 @@ void sdhci_enable_v4_mode(struct sdhci_host *host)
> > }
> > EXPORT_SYMBOL_GPL(sdhci_enable_v4_mode);
> >
> > -static inline bool sdhci_data_line_cmd(struct mmc_command *cmd)
> > +bool sdhci_data_line_cmd(struct mmc_command *cmd)
> > {
> > return cmd->data || cmd->flags & MMC_RSP_BUSY;
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_data_line_cmd);
> > +
> > +/* TODO: move this as an inline function to a header */
> >
> > static void sdhci_set_card_detection(struct sdhci_host *host, bool enable)
> > {
> > @@ -363,7 +364,7 @@ static void sdhci_reinit(struct sdhci_host *host)
> > mmc_detect_change(host->mmc, msecs_to_jiffies(200));
> > }
> >
> > -static void __sdhci_led_activate(struct sdhci_host *host)
> > +void __sdhci_led_activate(struct sdhci_host *host)
> > {
> > u8 ctrl;
> >
> > @@ -374,8 +375,9 @@ static void __sdhci_led_activate(struct sdhci_host *host)
> > ctrl |= SDHCI_CTRL_LED;
> > sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> > }
> > +EXPORT_SYMBOL_GPL(__sdhci_led_activate);
> >
> > -static void __sdhci_led_deactivate(struct sdhci_host *host)
> > +void __sdhci_led_deactivate(struct sdhci_host *host)
> > {
> > u8 ctrl;
> >
> > @@ -386,6 +388,7 @@ static void __sdhci_led_deactivate(struct sdhci_host *host)
> > ctrl &= ~SDHCI_CTRL_LED;
> > sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
> > }
> > +EXPORT_SYMBOL_GPL(__sdhci_led_deactivate);
> >
> > #if IS_REACHABLE(CONFIG_LEDS_CLASS)
> > static void sdhci_led_control(struct led_classdev *led,
> > @@ -464,14 +467,15 @@ static inline void sdhci_led_deactivate(struct sdhci_host *host)
> >
> > #endif
> >
> > -static void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq,
> > - unsigned long timeout)
> > +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq,
> > + unsigned long timeout)
> > {
> > if (sdhci_data_line_cmd(mrq->cmd))
> > mod_timer(&host->data_timer, timeout);
> > else
> > mod_timer(&host->timer, timeout);
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_mod_timer);
> >
> > static void sdhci_del_timer(struct sdhci_host *host, struct mmc_request *mrq)
> > {
> > @@ -1043,8 +1047,7 @@ static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd)
> > __sdhci_set_timeout(host, cmd);
> > }
> >
> > -static void sdhci_initialize_data(struct sdhci_host *host,
> > - struct mmc_data *data)
> > +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data)
> > {
> > WARN_ON(host->data);
> >
> > @@ -1057,6 +1060,7 @@ static void sdhci_initialize_data(struct sdhci_host *host,
> > host->data_early = 0;
> > host->data->bytes_xfered = 0;
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_initialize_data);
> >
> > static inline void sdhci_set_block_info(struct sdhci_host *host,
> > struct mmc_data *data)
> > @@ -1079,12 +1083,8 @@ static inline void sdhci_set_block_info(struct sdhci_host *host,
> > }
> > }
> >
> > -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> > +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data)
> > {
> > - struct mmc_data *data = cmd->data;
> > -
> > - sdhci_initialize_data(host, data);
> > -
> > if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
> > struct scatterlist *sg;
> > unsigned int length_mask, offset_mask;
> > @@ -1169,6 +1169,16 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> > }
> >
> > sdhci_set_transfer_irqs(host);
> > +}
> > +EXPORT_SYMBOL_GPL(sdhci_prepare_dma);
> > +
> > +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
> > +{
> > + struct mmc_data *data = cmd->data;
> > +
> > + sdhci_initialize_data(host, data);
> > +
> > + sdhci_prepare_dma(host, data);
> >
> > sdhci_set_block_info(host, data);
> > }
> > @@ -1211,8 +1221,7 @@ static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host,
> > return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan;
> > }
> >
> > -static int sdhci_external_dma_setup(struct sdhci_host *host,
> > - struct mmc_command *cmd)
> > +int sdhci_external_dma_setup(struct sdhci_host *host, struct mmc_command *cmd)
> > {
> > int ret, i;
> > enum dma_transfer_direction dir;
> > @@ -1264,8 +1273,9 @@ static int sdhci_external_dma_setup(struct sdhci_host *host,
> >
> > return ret;
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_external_dma_setup);
> >
> > -static void sdhci_external_dma_release(struct sdhci_host *host)
> > +void sdhci_external_dma_release(struct sdhci_host *host)
> > {
> > if (host->tx_chan) {
> > dma_release_channel(host->tx_chan);
> > @@ -1279,9 +1289,10 @@ static void sdhci_external_dma_release(struct sdhci_host *host)
> >
> > sdhci_switch_external_dma(host, false);
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_external_dma_release);
> >
> > -static void __sdhci_external_dma_prepare_data(struct sdhci_host *host,
> > - struct mmc_command *cmd)
> > +void __sdhci_external_dma_prepare_data(struct sdhci_host *host,
> > + struct mmc_command *cmd)
> > {
> > struct mmc_data *data = cmd->data;
> >
> > @@ -1292,6 +1303,7 @@ static void __sdhci_external_dma_prepare_data(struct sdhci_host *host,
> >
> > sdhci_set_block_info(host, data);
> > }
> > +EXPORT_SYMBOL(__sdhci_external_dma_prepare_data);
> >
> > static void sdhci_external_dma_prepare_data(struct sdhci_host *host,
> > struct mmc_command *cmd)
> > @@ -1306,8 +1318,8 @@ static void sdhci_external_dma_prepare_data(struct sdhci_host *host,
> > }
> > }
> >
> > -static void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
> > - struct mmc_command *cmd)
> > +void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
> > + struct mmc_command *cmd)
> > {
> > struct dma_chan *chan;
> >
> > @@ -1318,6 +1330,7 @@ static void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
> > if (chan)
> > dma_async_issue_pending(chan);
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_external_dma_pre_transfer);
> >
> > #else
> >
> > @@ -1369,11 +1382,11 @@ static inline bool sdhci_auto_cmd23(struct sdhci_host *host,
> > return mrq->sbc && (host->flags & SDHCI_AUTO_CMD23);
> > }
> >
> > -static inline bool sdhci_manual_cmd23(struct sdhci_host *host,
> > - struct mmc_request *mrq)
> > +bool sdhci_manual_cmd23(struct sdhci_host *host, struct mmc_request *mrq)
> > {
> > return mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23);
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_manual_cmd23);
> >
> > static inline void sdhci_auto_cmd_select(struct sdhci_host *host,
> > struct mmc_command *cmd,
> > @@ -1483,7 +1496,7 @@ static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq)
> > WARN_ON(i >= SDHCI_MAX_MRQS);
> > }
> >
> > -static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> > +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> > {
> > if (host->cmd && host->cmd->mrq == mrq)
> > host->cmd = NULL;
> > @@ -1507,15 +1520,17 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> > if (!sdhci_has_requests(host))
> > sdhci_led_deactivate(host);
> > }
> > +EXPORT_SYMBOL_GPL(__sdhci_finish_mrq);
> >
> > -static void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> > +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq)
> > {
> > __sdhci_finish_mrq(host, mrq);
> >
> > queue_work(host->complete_wq, &host->complete_work);
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_finish_mrq);
> >
> > -static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
> > +void __sdhci_finish_data_common(struct sdhci_host *host)
> > {
> > struct mmc_command *data_cmd = host->data_cmd;
> > struct mmc_data *data = host->data;
> > @@ -1548,6 +1563,14 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
> > data->bytes_xfered = 0;
> > else
> > data->bytes_xfered = data->blksz * data->blocks;
> > +}
> > +EXPORT_SYMBOL_GPL(__sdhci_finish_data_common);
> > +
> > +static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
> > +{
> > + struct mmc_data *data = host->data;
> > +
> > + __sdhci_finish_data_common(host);
> >
> > /*
> > * Need to send CMD12 if -
> > @@ -1586,12 +1609,13 @@ static void __sdhci_finish_data(struct sdhci_host *host, bool sw_data_timeout)
> > }
> > }
> >
> > -static void sdhci_finish_data(struct sdhci_host *host)
> > +void sdhci_finish_data(struct sdhci_host *host)
> > {
> > __sdhci_finish_data(host, false);
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_finish_data);
> >
> > -static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
> > +bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
> > {
> > int flags;
> > u32 mask;
> > @@ -1633,8 +1657,6 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
> > sdhci_prepare_data(host, cmd);
> > }
> >
> > - sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
> > -
> > sdhci_set_transfer_mode(host, cmd);
> >
> > if ((cmd->flags & MMC_RSP_136) && (cmd->flags & MMC_RSP_BUSY)) {
> > @@ -1678,13 +1700,16 @@ static bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
> > if (host->use_external_dma)
> > sdhci_external_dma_pre_transfer(host, cmd);
> >
> > + sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT);
> > +
> > sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND);
> >
> > return true;
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_send_command);
> >
> > -static bool sdhci_present_error(struct sdhci_host *host,
> > - struct mmc_command *cmd, bool present)
> > +bool sdhci_present_error(struct sdhci_host *host,
> > + struct mmc_command *cmd, bool present)
> > {
> > if (!present || host->flags & SDHCI_DEVICE_DEAD) {
> > cmd->error = -ENOMEDIUM;
> > @@ -1693,6 +1718,7 @@ static bool sdhci_present_error(struct sdhci_host *host,
> >
> > return false;
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_present_error);
> >
> > static bool sdhci_send_command_retry(struct sdhci_host *host,
> > struct mmc_command *cmd,
> > @@ -1755,7 +1781,7 @@ static void sdhci_read_rsp_136(struct sdhci_host *host, struct mmc_command *cmd)
> > }
> > }
> >
> > -static void sdhci_finish_command(struct sdhci_host *host)
> > +void sdhci_finish_command(struct sdhci_host *host)
> > {
> > struct mmc_command *cmd = host->cmd;
> >
> > @@ -1808,6 +1834,7 @@ static void sdhci_finish_command(struct sdhci_host *host)
> > __sdhci_finish_mrq(host, cmd->mrq);
> > }
> > }
> > +EXPORT_SYMBOL_GPL(sdhci_finish_command);
> >
> > static u16 sdhci_get_preset_value(struct sdhci_host *host)
> > {
> > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> > index e84ebddb20d8..6eeb74741da3 100644
> > --- a/drivers/mmc/host/sdhci.h
> > +++ b/drivers/mmc/host/sdhci.h
> > @@ -831,8 +831,29 @@ static inline void sdhci_read_caps(struct sdhci_host *host)
> > __sdhci_read_caps(host, NULL, NULL, NULL);
> > }
> >
> > +bool sdhci_data_line_cmd(struct mmc_command *cmd);
> > void sdhci_runtime_pm_bus_on(struct sdhci_host *host);
> > void sdhci_runtime_pm_bus_off(struct sdhci_host *host);
> > +void sdhci_mod_timer(struct sdhci_host *host, struct mmc_request *mrq,
> > + unsigned long timeout);
> > +void sdhci_initialize_data(struct sdhci_host *host, struct mmc_data *data);
> > +void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data);
> > +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
> > +int sdhci_external_dma_setup(struct sdhci_host *host, struct mmc_command *cmd);
> > +void sdhci_external_dma_release(struct sdhci_host *host);
> > +void __sdhci_external_dma_prepare_data(struct sdhci_host *host,
> > + struct mmc_command *cmd);
> > +void sdhci_external_dma_pre_transfer(struct sdhci_host *host,
> > + struct mmc_command *cmd);
> > +#endif
> > +bool sdhci_manual_cmd23(struct sdhci_host *host, struct mmc_request *mrq);
> > +void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
> > +void sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq);
> > +void __sdhci_finish_data_common(struct sdhci_host *host);
> > +bool sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd);
> > +void sdhci_finish_command(struct sdhci_host *host);
> > +bool sdhci_present_error(struct sdhci_host *host,
> > + struct mmc_command *cmd, bool present);
> > u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
> > unsigned int *actual_clock);
> > void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
> >
>
Powered by blists - more mailing lists