[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201201153706.13450-4-srinivas.kandagatla@linaro.org>
Date: Tue, 1 Dec 2020 15:37:03 +0000
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: bjorn.andersson@...aro.org
Cc: linux-arm-msm@...r.kernel.org, agross@...nel.org,
robh+dt@...nel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH 3/6] arm64: dts: qcom: sm8250: add lpass lpi pin controller node
Add LPASS LPI pinctrl node required for Audio functionality on RB5.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 95 ++++++++++++++++++++++++++++
1 file changed, 95 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index ec5b53b8f656..4e1309b6571e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2607,6 +2607,101 @@
clock-names = "core", "audio", "bus";
};
+ lpass_tlmm: pinctrl@...0000{
+ compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+ reg = <0 0x33c0000 0x0 0x20000>,
+ <0 0x3550000 0x0 0x10000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&lpass_tlmm 0 0 14>;
+
+ clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+ clock-names = "core", "audio";
+
+ wsa_swr_clk_pin {
+ wsa_swr_clk_sleep: wsa_swr_clk_sleep {
+ mux {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ wsa_swr_clk_active: wsa_swr_clk_active {
+ mux {
+ pins = "gpio10";
+ function = "wsa_swr_clk";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-disable;
+ };
+ };
+ };
+
+ wsa_swr_data_pin {
+ wsa_swr_data_sleep: wsa_swr_data_sleep {
+ mux {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ wsa_swr_data_active: wsa_swr_data_active {
+ mux {
+ pins = "gpio11";
+ function = "wsa_swr_data";
+ drive-strength = <2>;
+ slew-rate = <1>;
+ bias-bus-hold;
+ };
+ };
+ };
+
+ cdc_dmic01_data_active: dmic01_data_active {
+ mux {
+ pins = "gpio7";
+ function = "dmic1_data";
+ drive-strength = <8>;
+ input-enable;
+ };
+ };
+
+ cdc_dmic01_data_sleep: dmic01_data_sleep {
+ mux {
+ pins = "gpio7";
+ function = "dmic1_data";
+ drive-strength = <2>;
+ pull-down;
+ input-enable;
+ };
+ };
+
+ cdc_dmic01_clk_active: dmic01_clk_active {
+ mux {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ drive-strength = <8>;
+ output-high;
+ };
+ };
+
+ cdc_dmic01_clk_sleep: dmic01_clk_sleep {
+ mux {
+ pins = "gpio6";
+ function = "dmic1_clk";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+ };
+ };
+
adsp: remoteproc@...00000 {
compatible = "qcom,sm8250-adsp-pas";
reg = <0 0x17300000 0 0x100>;
--
2.21.0
Powered by blists - more mailing lists