linux-kernel - [PATCH net-next v4 3/9] net: dsa: microchip: ksz9477: move chip reset to ksz9477_switch

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20201201160611.22129-4-ceggers@arri.de>
Date:   Tue, 1 Dec 2020 17:06:05 +0100
From:   Christian Eggers <ceggers@...i.de>
To:     Vladimir Oltean <olteanv@...il.com>,
        Jakub Kicinski <kuba@...nel.org>, Andrew Lunn <andrew@...n.ch>,
        Richard Cochran <richardcochran@...il.com>,
        "Rob Herring" <robh+dt@...nel.org>
CC:     Vivien Didelot <vivien.didelot@...il.com>,
        "David S . Miller" <davem@...emloft.net>,
        Kurt Kanzenbach <kurt.kanzenbach@...utronix.de>,
        George McCollister <george.mccollister@...il.com>,
        Marek Vasut <marex@...x.de>,
        Helmut Grohne <helmut.grohne@...enta.de>,
        Paul Barker <pbarker@...sulko.com>,
        Codrin Ciubotariu <codrin.ciubotariu@...rochip.com>,
        Tristram Ha <Tristram.Ha@...rochip.com>,
        Woojung Huh <woojung.huh@...rochip.com>,
        Microchip Linux Driver Support <UNGLinuxDriver@...rochip.com>,
        Christian Eggers <ceggers@...i.de>, <netdev@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH net-next v4 3/9] net: dsa: microchip: ksz9477: move chip reset to ksz9477_switch_init()

The next patch will add basic interrupt support. Chip reset must be
performed before requesting the IRQ, so move this from ksz9477_setup()
to ksz9477_init().

Signed-off-by: Christian Eggers <ceggers@...i.de>
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
---
 drivers/net/dsa/microchip/ksz9477_main.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477_main.c b/drivers/net/dsa/microchip/ksz9477_main.c
index abfd3802bb51..c0b4cf66c904 100644
--- a/drivers/net/dsa/microchip/ksz9477_main.c
+++ b/drivers/net/dsa/microchip/ksz9477_main.c
@@ -1345,19 +1345,12 @@ static void ksz9477_config_cpu_port(struct dsa_switch *ds)
 static int ksz9477_setup(struct dsa_switch *ds)
 {
 	struct ksz_device *dev = ds->priv;
-	int ret = 0;
 
 	dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
 				       dev->num_vlans, GFP_KERNEL);
 	if (!dev->vlan_cache)
 		return -ENOMEM;
 
-	ret = ksz9477_reset_switch(dev);
-	if (ret) {
-		dev_err(ds->dev, "failed to reset switch\n");
-		return ret;
-	}
-
 	/* Required for port partitioning. */
 	ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
 		      true);
@@ -1537,10 +1530,16 @@ static const struct ksz_chip_data ksz9477_switch_chips[] = {
 
 static int ksz9477_switch_init(struct ksz_device *dev)
 {
-	int i;
+	int i, ret;
 
 	dev->ds->ops = &ksz9477_switch_ops;
 
+	ret = ksz9477_reset_switch(dev);
+	if (ret) {
+		dev_err(dev->dev, "failed to reset switch\n");
+		return ret;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
 		const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
 
-- 
Christian Eggers
Embedded software developer

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler