| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <81ac4e5b5974cd7a21f18bf4e74213e9@codeaurora.org>
Date: Tue, 01 Dec 2020 11:11:57 +0800
From: Can Guo <cang@...eaurora.org>
To: "Asutosh Das (asd)" <asutoshd@...eaurora.org>
Cc: nguyenb@...eaurora.org, hongwus@...eaurora.org,
ziqichen@...eaurora.org, rnayak@...eaurora.org,
linux-scsi@...r.kernel.org, kernel-team@...roid.com,
saravanak@...gle.com, salyzyn@...gle.com,
Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Matthias Brugger <matthias.bgg@...il.com>,
Bean Huo <beanhuo@...ron.com>,
Stanley Chu <stanley.chu@...iatek.com>,
Tomas Winkler <tomas.winkler@...el.com>,
Bart Van Assche <bvanassche@....org>,
Satya Tangirala <satyat@...gle.com>,
open list <linux-kernel@...r.kernel.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-arm-kernel@...ts.infradead.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH v3 1/2] scsi: ufs: Refactor ufshcd_setup_clocks() to
remove skip_ref_clk
On 2020-12-01 07:01, Asutosh Das (asd) wrote:
> On 11/25/2020 6:01 PM, Can Guo wrote:
>> Remove the param skip_ref_clk from __ufshcd_setup_clocks(), but keep a
>> flag
>> in struct ufs_clk_info to tell whether a clock can be disabled or not
>> while
>> the link is active.
>>
>> Reviewed-by: Hongwu Su<hongwus@...eaurora.org>
>> Reviewed-by: Bean Huo <beanhuo@...ron.com>
>> Reviewed-by: Stanley Chu <stanley.chu@...iatek.com>
>> Signed-off-by: Can Guo <cang@...eaurora.org>
>> ---
>> drivers/scsi/ufs/ufshcd-pltfrm.c | 2 ++
>> drivers/scsi/ufs/ufshcd.c | 29 +++++++++--------------------
>> drivers/scsi/ufs/ufshcd.h | 3 +++
>> 3 files changed, 14 insertions(+), 20 deletions(-)
>>
>> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c
>> b/drivers/scsi/ufs/ufshcd-pltfrm.c
>> index 3db0af6..873ef14 100644
>> --- a/drivers/scsi/ufs/ufshcd-pltfrm.c
>> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
>> @@ -92,6 +92,8 @@ static int ufshcd_parse_clock_info(struct ufs_hba
>> *hba)
>> clki->min_freq = clkfreq[i];
>> clki->max_freq = clkfreq[i+1];
>> clki->name = kstrdup(name, GFP_KERNEL);
>> + if (!strcmp(name, "ref_clk"))
>> + clki->keep_link_active = true;
>> dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
>> clki->min_freq, clki->max_freq, clki->name);
>> list_add_tail(&clki->list, &hba->clk_list_head);
>> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
>> index a7857f6..44254c9 100644
>> --- a/drivers/scsi/ufs/ufshcd.c
>> +++ b/drivers/scsi/ufs/ufshcd.c
>> @@ -221,8 +221,6 @@ static int ufshcd_eh_host_reset_handler(struct
>> scsi_cmnd *cmd);
>> static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
>> static void ufshcd_hba_exit(struct ufs_hba *hba);
>> static int ufshcd_probe_hba(struct ufs_hba *hba, bool async);
>> -static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
>> - bool skip_ref_clk);
>> static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
>> static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
>> static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba
>> *hba);
>> @@ -1707,11 +1705,7 @@ static void ufshcd_gate_work(struct work_struct
>> *work)
>> ufshcd_disable_irq(hba);
>> - if (!ufshcd_is_link_active(hba))
>> - ufshcd_setup_clocks(hba, false);
>> - else
>> - /* If link is active, device ref_clk can't be switched off */
>> - __ufshcd_setup_clocks(hba, false, true);
>> + ufshcd_setup_clocks(hba, false);
>> /*
>> * In case you are here to cancel this work the gating state
>> @@ -7990,8 +7984,7 @@ static int ufshcd_init_hba_vreg(struct ufs_hba
>> *hba)
>> return 0;
>> }
>> -static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
>> - bool skip_ref_clk)
>> +static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
>> {
>> int ret = 0;
>> struct ufs_clk_info *clki;
>> @@ -8009,7 +8002,12 @@ static int __ufshcd_setup_clocks(struct ufs_hba
>> *hba, bool on,
>> list_for_each_entry(clki, head, list) {
>> if (!IS_ERR_OR_NULL(clki->clk)) {
>> - if (skip_ref_clk && !strcmp(clki->name, "ref_clk"))
>> + /*
>> + * Don't disable clocks which are needed
>> + * to keep the link active.
>> + */
>> + if (ufshcd_is_link_active(hba) &&
>> + clki->keep_link_active)
>> continue;
>> clk_state_changed = on ^ clki->enabled;
>> @@ -8054,11 +8052,6 @@ static int __ufshcd_setup_clocks(struct ufs_hba
>> *hba, bool on,
>> return ret;
>> }
>> -static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
>> -{
>> - return __ufshcd_setup_clocks(hba, on, false);
>> -}
>> -
>> static int ufshcd_init_clocks(struct ufs_hba *hba)
>> {
>> int ret = 0;
>> @@ -8577,11 +8570,7 @@ static int ufshcd_suspend(struct ufs_hba *hba,
>> enum ufs_pm_op pm_op)
>> */
>> ufshcd_disable_irq(hba);
>> - if (!ufshcd_is_link_active(hba))
>> - ufshcd_setup_clocks(hba, false);
>> - else
>> - /* If link is active, device ref_clk can't be switched off */
>> - __ufshcd_setup_clocks(hba, false, true);
>> + ufshcd_setup_clocks(hba, false);
>> if (ufshcd_is_clkgating_allowed(hba)) {
>> hba->clk_gating.state = CLKS_OFF;
>> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
>> index 66e5338..6f0f2d4 100644
>> --- a/drivers/scsi/ufs/ufshcd.h
>> +++ b/drivers/scsi/ufs/ufshcd.h
>> @@ -229,6 +229,8 @@ struct ufs_dev_cmd {
>> * @max_freq: maximum frequency supported by the clock
>> * @min_freq: min frequency that can be used for clock scaling
>> * @curr_freq: indicates the current frequency that it is set to
>> + * @keep_link_active: indicates that the clk should not be disabled
>> if
>> + link is active
>> * @enabled: variable to check against multiple enable/disable
>> */
>> struct ufs_clk_info {
>> @@ -238,6 +240,7 @@ struct ufs_clk_info {
>> u32 max_freq;
>> u32 min_freq;
>> u32 curr_freq;
>> + bool keep_link_active;
>
> Nitpick - How about 'always-on' instead of 'keep_link_active'?
Hi Asutosh,
But it is not always-on, during suspend, it is on when rpm/spm-lvl is 1
and 2, off when rpm/spm-lvl is 3, 4 and 5, depending on the link state.
Thanks,
Can Guo.
>> bool enabled;
>> };
>>
Powered by blists - more mailing lists