| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201201223511.65542-4-mgross@linux.intel.com>
Date: Tue, 1 Dec 2020 14:34:52 -0800
From: mgross@...ux.intel.com
To: markgross@...nel.org, mgross@...ux.intel.com, arnd@...db.de,
bp@...e.de, damien.lemoal@....com, dragan.cvetic@...inx.com,
gregkh@...uxfoundation.org, corbet@....net,
leonard.crestez@....com, palmerdabbelt@...gle.com,
paul.walmsley@...ive.com, peng.fan@....com, robh+dt@...nel.org,
shawnguo@...nel.org
Cc: linux-kernel@...r.kernel.org,
Daniele Alessandrelli <daniele.alessandrelli@...el.com>
Subject: [PATCH 03/22] keembay-ipc: Add Keem Bay IPC module
From: Daniele Alessandrelli <daniele.alessandrelli@...el.com>
On the Intel Movidius SoC code named Keem Bay, communication between the
Computing Sub-System (CSS), i.e., the CPU, and the Multimedia Sub-System
(MSS), i.e., the VPU is enabled by the Keem Bay Inter-Processor
Communication (IPC) mechanism.
Add the driver for using Keem Bay IPC from within the Linux Kernel.
Keem Bay IPC uses the following terminology:
- Node: A processing entity that can use the IPC to communicate;
currently, we just have two nodes, CPU (CSS) and VPU (MSS).
- Link: Two nodes that can communicate over IPC form an IPC link
(currently, we just have one link, the one between the CPU
and VPU).
- Channel: An IPC link can provide multiple IPC channels. IPC channels
allow communication multiplexing, i.e., the same IPC link can
be used by different applications for different
communications. Each channel is identified by a channel ID,
which must be unique within a single IPC link. Channels are
divided in two categories, High-Speed (HS) channels and
General-Purpose (GP) channels. HS channels have higher
priority over GP channels.
Keem Bay IPC mechanism is based on shared memory and hardware FIFOs.
Both the CPU and the VPU have their own hardware FIFO. When the CPU
wants to send an IPC message to the VPU, it writes to the VPU FIFO (MSS
FIFO); similarly, when MSS wants to send an IPC message to the CPU, it
writes to the CPU FIFO (CSS FIFO).
A FIFO entry is simply a pointer to an IPC buffer (aka IPC header)
stored in a portion of memory shared between the CPU and the VPU.
Specifically, the FIFO entry contains the (VPU) physical address of the
IPC buffer being transferred.
In turn, the IPC buffer contains the (VPU) physical address of the
payload (which must be located in shared memory too) as well as other
information (payload size, IPC channel ID, etc.).
Each IPC node instantiates a pool of IPC buffers from its own IPC buffer
memory region. When instantiated, IPC buffers are marked as free. When
the node needs to send an IPC message, it gets the first free buffer it
finds (from its own pool), marks it as allocated (used), and puts its
physical address into the IPC FIFO of the destination node. The
destination node (which is notified by an interrupt when there are
entries pending in its FIFO) extract the physical address from the FIFO
and process the IPC buffer, marking it as free once done (so that the
sender can reuse the buffer).
Reviewed-by: Mark Gross <mgross@...ux.intel.com>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@...el.com>
---
MAINTAINERS | 8 +
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/intel/Kconfig | 17 +
drivers/soc/intel/Makefile | 4 +
drivers/soc/intel/keembay-ipc.c | 1669 +++++++++++++++++++++++++
include/linux/soc/intel/keembay-ipc.h | 30 +
7 files changed, 1730 insertions(+)
create mode 100644 drivers/soc/intel/Kconfig
create mode 100644 drivers/soc/intel/Makefile
create mode 100644 drivers/soc/intel/keembay-ipc.c
create mode 100644 include/linux/soc/intel/keembay-ipc.h
diff --git a/MAINTAINERS b/MAINTAINERS
index e451dcce054f..64475ba4ea9d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8955,6 +8955,14 @@ M: Deepak Saxena <dsaxena@...xity.net>
S: Maintained
F: drivers/char/hw_random/ixp4xx-rng.c
+INTEL KEEM BAY IPC DRIVER
+M: Daniele Alessandrelli <daniele.alessandrelli@...el.com>
+M: Mark Gross <mgross@...ux.intel.com>
+S: Maintained
+F: Documentation/devicetree/bindings/soc/intel/intel,keembay-ipc.yaml
+F: drivers/soc/intel/keembay-ipc.c
+F: include/linux/soc/intel/keembay-ipc.h
+
INTEL MANAGEMENT ENGINE (mei)
M: Tomas Winkler <tomas.winkler@...el.com>
L: linux-kernel@...r.kernel.org
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index 425ab6f7e375..c21a85bc3899 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -8,6 +8,7 @@ source "drivers/soc/atmel/Kconfig"
source "drivers/soc/bcm/Kconfig"
source "drivers/soc/fsl/Kconfig"
source "drivers/soc/imx/Kconfig"
+source "drivers/soc/intel/Kconfig"
source "drivers/soc/ixp4xx/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 36452bed86ef..fbd587640e1f 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_MACH_DOVE) += dove/
obj-y += fsl/
obj-$(CONFIG_ARCH_GEMINI) += gemini/
obj-y += imx/
+obj-y += intel/
obj-$(CONFIG_ARCH_IXP4XX) += ixp4xx/
obj-$(CONFIG_SOC_XWAY) += lantiq/
obj-y += mediatek/
diff --git a/drivers/soc/intel/Kconfig b/drivers/soc/intel/Kconfig
new file mode 100644
index 000000000000..1f5c05b97649
--- /dev/null
+++ b/drivers/soc/intel/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Keem Bay SoC drivers
+#
+
+menu "Intel SoC drivers"
+
+config KEEMBAY_IPC
+ tristate "Support for Intel Keem Bay IPC"
+ depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)
+ help
+ Keem Bay IPC enables communication between the Keem Bay CPU
+ Sub-System (CSS) and the Keem Bay Media Sub-System (MSS).
+
+ Select this if you are compiling the Kernel for an Intel SoC that
+ includes the Intel Vision Processing Unit (VPU) such as Keem Bay.
+endmenu
diff --git a/drivers/soc/intel/Makefile b/drivers/soc/intel/Makefile
new file mode 100644
index 000000000000..ecf0246e7822
--- /dev/null
+++ b/drivers/soc/intel/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for Keem Bay IPC Linux driver
+#
+obj-$(CONFIG_KEEMBAY_IPC) += keembay-ipc.o
diff --git a/drivers/soc/intel/keembay-ipc.c b/drivers/soc/intel/keembay-ipc.c
new file mode 100644
index 000000000000..7f1e195a0cf8
--- /dev/null
+++ b/drivers/soc/intel/keembay-ipc.c
@@ -0,0 +1,1669 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Keem Bay IPC Driver.
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ *
+ * This driver enables Inter-Processor Communication (IPC) between the
+ * Computing Sub-System (CSS) and the Multimedia Sub-System (MSS) of Keem Bay.
+ * CSS is where Linux is running; while MSS is where the VPU firmware runs.
+ *
+ * The IPC uses the following terminology:
+ *
+ * - Node: A processing entity that can use the IPC to communicate
+ * (currently, we just have two nodes, CSS and MSS).
+ *
+ * - Link: Two nodes that can communicate over IPC form an IPC link
+ * (currently, we just have one link, the one formed by CSS and MSS).
+ *
+ * - Channel: An IPC link can provide multiple IPC channels. IPC channels allow
+ * communication multiplexing, i.e., the same IPC link can be used
+ * by different applications for different communications. Each
+ * channel is identified by a channel ID, which must be unique
+ * within a single IPC link. Channels are divided in two categories,
+ * High-Speed (HS) channels and General-Purpose (GP) channels.
+ * HS channels have higher priority over GP channels.
+ *
+ * Keem Bay IPC mechanism is based on shared memory and hardware FIFOs. Both
+ * CSS and MSS have their own hardware FIFO. When CSS wants to send an IPC
+ * message to MSS, it writes to the MSS FIFO; similarly, when MSS wants to send
+ * an IPC message to CSS, it writes to the CSS FIFO.
+ *
+ * A FIFO entry is simply a pointer to an IPC buffer (aka IPC header) stored in
+ * a portion of memory shared between CSS and MSS. Specifically, the FIFO entry
+ * contains the (VPU) physical address of the IPC buffer being transferred.
+ *
+ * In turn, the IPC buffer contains the (VPU) physical address of the payload
+ * (which must be located in shared memory too) as well as other information
+ * (payload size, IPC channel ID, etc.).
+ *
+ * Each IPC node instantiates a pool of IPC buffers from its own IPC buffer
+ * memory region. When instantiated, IPC buffers are marked as free. When the
+ * node needs to send an IPC message, it gets the first free buffer it finds
+ * (from its own pool), marks it as allocated (used), and puts its physical
+ * address into the IPC FIFO of the destination node. The destination node
+ * (which is notified by an interrupt when there are entries pending in its
+ * FIFO) extract the physical address from the FIFO and process the IPC buffer,
+ * marking it as free once done (so that the sender can reuse the buffer).
+ *
+ * Note: Keem Bay IPC is not based on RPMsg, since MSS HW/FW does not support
+ * Virtio and Virtqueues.
+ */
+
+#include <linux/circ_buf.h>
+#include <linux/completion.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+
+#include <linux/soc/intel/keembay-ipc.h>
+
+#define DRV_NAME "keembay-ipc"
+
+/* The alignment to be used for IPC Buffers and IPC Data. */
+#define KMB_IPC_ALIGNMENT 64
+
+/* Maximum number of channels per link. */
+#define KMB_IPC_MAX_CHANNELS 1024
+
+/* The number of high-speed channels per link. */
+#define KMB_IPC_NUM_HS_CHANNELS 10
+
+/*
+ * This is used as index for retrieving reserved memory from the device
+ * tree.
+ */
+#define LOCAL_IPC_BUFFER_IDX 0
+#define REMOTE_IPC_BUFFER_IDX 1
+
+/*
+ * The length of the RX software FIFO.
+ *
+ * Note: This must be a power of 2 as required by the circular buffer API
+ * defined in "linux/circ_buf.h".
+ */
+#define RX_SW_FIFO_LEN 256
+
+/*
+ * The IPC FIFO registers (offsets to the base address defined in device tree).
+ */
+
+/* Read/Write a word from/to FIFO. */
+#define IPC_FIFO 0x00
+
+/* Read from FIFO using ATM mode (currently not used by this driver). */
+#define IPC_FIFO_ATM 0x04
+
+/* FIFO Status. */
+#define IPC_FIFO_STAT 0x0C
+
+/* IPC FIFO overflow status, IDs 63-0 */
+#define IPC_FIFO_OF_FLAG0 0x10
+#define IPC_FIFO_OF_FLAG1 0x14
+
+/* The possible states of an IPC buffer. */
+enum {
+ /*
+ * KMB_IPC_BUF_FREE must be set to 0 to ensure that buffers can be
+ * initialized with memset(&buf, 0, sizeof(buf)).
+ */
+ KMB_IPC_BUF_FREE = 0,
+ KMB_IPC_BUF_ALLOCATED,
+};
+
+/**
+ * struct kmb_ipc_buf - The IPC buffer structure.
+ * @data_addr: The address where the IPC payload is located; NOTE: this is a
+ * VPU address (not a CPU one).
+ * @data_size: The size of the payload.
+ * @channel: The channel used.
+ * @src_node: The Node ID of the sender.
+ * @dst_node: The Node ID of the intended receiver.
+ * @status: Either free or allocated.
+ */
+struct kmb_ipc_buf {
+ u32 data_addr;
+ u32 data_size;
+ u16 channel;
+ u8 src_node;
+ u8 dst_node;
+ u8 status;
+} __packed __aligned(KMB_IPC_ALIGNMENT);
+
+/**
+ * struct ipc_buf_mem - IPC Buffer Memory Region.
+ * @dev: Child device managing the memory region.
+ * @vaddr: The virtual address of the memory region.
+ * @dma_handle: The VPU address of the memory region.
+ * @size: The size of the memory region.
+ */
+struct ipc_buf_mem {
+ struct device *dev;
+ void *vaddr;
+ dma_addr_t dma_handle;
+ size_t size;
+};
+
+/**
+ * struct ipc_buf_pool - IPC buffer pool.
+ * @buffers: Pointer to the array of buffers.
+ * @buf_cnt: Pool size (i.e., number of buffers).
+ * @idx: Current index.
+ */
+struct ipc_buf_pool {
+ struct kmb_ipc_buf *buffers;
+ size_t buf_cnt;
+ size_t idx;
+};
+
+/**
+ * struct ipc_chan - IPC channel.
+ * @rx_data_list: The list of incoming messages.
+ * @rx_lock: The lock for modifying the rx_data_list.
+ * @rx_wait_queue: The wait queue for RX Data (recv() waits on it).
+ * @closing: Closing flag, set when the channel is being closed.
+ */
+struct ipc_chan {
+ struct list_head rx_data_list;
+ spinlock_t rx_lock; /* Protects 'rx_data_list'. */
+ wait_queue_head_t rx_wait_queue;
+ bool closing;
+};
+
+/**
+ * struct tx_data - Element of a TX queue.
+ * @vpu_addr: The VPU address of the data to be transferred.
+ * @size: The size of the data to be transferred.
+ * @chan_id: The channel to be used for the transfer.
+ * @dst_node: The destination node.
+ * @retv: The result of the transfer.
+ * @list: The list head used to concatenate TX data elements.
+ * @tx_done: The completion struct used by the sender to wait for the
+ * transfer to complete.
+ */
+struct tx_data {
+ u32 vpu_addr;
+ u32 size;
+ u16 chan_id;
+ u8 dst_node;
+ int retv;
+ struct list_head list;
+ struct completion tx_done;
+};
+
+/**
+ * struct tx_queue - The TX queue structure.
+ * @tx_data_list: The list of pending TX data on this queue.
+ * @lock: The lock protecting the TX data list.
+ */
+struct tx_queue {
+ struct list_head tx_data_list;
+ spinlock_t lock; /* Protects tx_data_list. */
+};
+
+/**
+ * struct ipc_link - An IPC link.
+ * @channels: The channels associated with this link (the pointers to the
+ * channels are RCU-protected).
+ * @chan_lock: The lock for modifying the channels array.
+ * @srcu_sp: The Sleepable RCU structs associated with the link's channels.
+ * @tx_queues: The TX queues for this link (1 queue for each high-speed
+ * channels + 1 shared among all the general-purpose channels).
+ * @tx_qidx: The index of the next tx_queue to be check for outgoing data.
+ * @tx_queued: The TX completion used to signal when new TX data is pending.
+ * @tx_thread: The TX thread.
+ * @tx_stopping: Flag signaling that the IPC Link is being closed.
+ */
+struct ipc_link {
+ struct ipc_chan __rcu *channels[KMB_IPC_MAX_CHANNELS];
+ spinlock_t chan_lock; /* Protects modifications to 'channels'. */
+ struct srcu_struct srcu_sp[KMB_IPC_MAX_CHANNELS];
+ struct tx_queue tx_queues[KMB_IPC_NUM_HS_CHANNELS + 1];
+ int tx_qidx;
+ struct completion tx_queued;
+ struct task_struct *tx_thread;
+ bool tx_stopping;
+};
+
+/*
+ * RX Circular Buffer struct.
+ *
+ * The producer inserts elements to the head and the consumers extracts
+ * elements from the tail. See Documentation/circular-buffers.txt for usage
+ * details.
+ */
+struct rx_circ_buf {
+ u32 buf[RX_SW_FIFO_LEN];
+ int head;
+ int tail;
+};
+
+/**
+ * struct keembay_ipc_dev - IPC private data.
+ *
+ * @plat_dev: Platform device for this driver.
+ * @local_ipc_mem: Local IPC Buffer memory region.
+ * @remote_ipc_mem: Remove IPC Buffer memory region.
+ * @ipc_buf_pool: The pool of IPC buffers.
+ * @leon_mss_link: The ARM_CSS-Leon_MSS link.
+ * @local_fifo_irq: The IRQ line used by the local hardware FIFO.
+ * @local_fifo_irq_enabled: Whether or not the local hardware FIFO IRQ is
+ * enabled.
+ * @local_fifo_irq_lock: The spinlock to protect the enabled status of the
+ * local FIFO IRQ.
+ * @local_fifo_reg: The base address of the local HW FIFO.
+ * @remote_fifo_reg: The base address of the remote HW FIFO (i.e., the
+ * Leon MSS FIFO).
+ * @rx_tasklet: The RX tasklet.
+ * @rx_sw_fifo: The RX SW FIFO. The RX ISR writes to this FIFO and
+ * the RX tasklet reads from it.
+ */
+struct keembay_ipc_dev {
+ struct platform_device *plat_dev;
+ struct ipc_buf_mem local_ipc_mem;
+ struct ipc_buf_mem remote_ipc_mem;
+ struct ipc_buf_pool ipc_buf_pool;
+ struct ipc_link leon_mss_link;
+ int local_fifo_irq;
+ int local_fifo_irq_enabled;
+ spinlock_t local_fifo_irq_lock; /* Protects status of FIFO IRQ. */
+ void __iomem *local_fifo_reg;
+ void __iomem *remote_fifo_reg;
+ struct tasklet_struct rx_tasklet;
+ struct rx_circ_buf rx_sw_fifo;
+};
+
+/*
+ * RX Data Descriptor.
+ *
+ * Instances of this struct are meant to be inserted in the RX Data queue
+ * (list) associated with each channel.
+ */
+struct rx_data {
+ /* List head for creating a list of rx_data elements. */
+ struct list_head list;
+ /* The VPU address of the received data. */
+ u32 data_vpu_addr;
+ /* The size of the received data. */
+ u32 data_size;
+};
+
+/* Forward declaration of TX thread function. */
+static int tx_thread_fn(void *ptr);
+
+/* Forward declaration of ISR function. */
+static irqreturn_t local_fifo_irq_handler(int irq, void *ptr);
+
+/* Forward declaration of RX tasklet function. */
+static void rx_tasklet_func(unsigned long);
+
+/*
+ * Functions related to reserved-memory sub-devices.
+ */
+
+/*
+ * init_ipc_rsvd_mem() - Init the specified IPC reserved memory.
+ * @dev: The IPC device for which the memory will be initialized.
+ * @mem: Where to stored information about the initialized memory.
+ * @mem_name: The name of this IPC memory.
+ * @mem_idx: The index of the memory to initialize.
+ *
+ * Create a child device for 'dev' and use it to initialize the reserved
+ * memory region specified in the device tree at index 'mem_idx'.
+ * Also allocate DMA memory from the initialized memory region.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int init_ipc_rsvd_mem(struct device *dev, struct ipc_buf_mem *mem,
+ const char *mem_name, unsigned int mem_idx)
+{
+ struct device *mem_dev;
+ struct device_node *np;
+ struct resource mem_res;
+ dma_addr_t dma_handle;
+ size_t mem_size;
+ void *vaddr;
+ int rc;
+
+ /* Create a child device (of dev) to own the reserved memory. */
+ mem_dev = devm_kzalloc(dev, sizeof(struct device), GFP_KERNEL);
+ if (!mem_dev)
+ return -ENOMEM;
+
+ device_initialize(mem_dev);
+ dev_set_name(mem_dev, "%s:%s", dev_name(dev), mem_name);
+ mem_dev->parent = dev;
+ mem_dev->dma_mask = dev->dma_mask;
+ mem_dev->coherent_dma_mask = dev->coherent_dma_mask;
+ mem_dev->release = of_reserved_mem_device_release;
+
+ /* Set up DMA configuration using information from parent's DT node. */
+ rc = of_dma_configure(mem_dev, dev->of_node, true);
+ if (rc)
+ goto err_add;
+
+ rc = device_add(mem_dev);
+ if (rc)
+ goto err_add;
+
+ /* Initialized the device reserved memory region. */
+ rc = of_reserved_mem_device_init_by_idx(mem_dev, dev->of_node, mem_idx);
+ if (rc) {
+ dev_err(dev, "Couldn't get reserved memory with idx = %d, %d\n",
+ mem_idx, rc);
+ goto err_post_add;
+ }
+
+ /* Find out the size of the memory region. */
+ np = of_parse_phandle(dev->of_node, "memory-region", mem_idx);
+ if (!np) {
+ dev_err(dev, "Couldn't find memory-region %d\n", mem_idx);
+ rc = -EINVAL;
+ goto err_post_add;
+ }
+ rc = of_address_to_resource(np, 0, &mem_res);
+ if (rc) {
+ dev_err(dev, "Couldn't map address to resource %d\n", mem_idx);
+ goto err_post_add;
+ }
+ mem_size = resource_size(&mem_res);
+
+ /* Allocate memory from the reserved memory regions */
+ vaddr = dmam_alloc_coherent(mem_dev, mem_size, &dma_handle, GFP_KERNEL);
+ if (!vaddr) {
+ dev_err(mem_dev, "Failed to allocate from reserved memory.\n");
+ rc = -ENOMEM;
+ goto err_post_add;
+ }
+
+ mem->dev = mem_dev;
+ mem->vaddr = vaddr;
+ mem->dma_handle = dma_handle;
+ mem->size = mem_size;
+
+ return 0;
+
+err_post_add:
+ device_del(mem_dev);
+err_add:
+ put_device(mem_dev);
+ return rc;
+}
+
+/*
+ * Keem Bay IPC HW FIFO API.
+ *
+ * We use two HW FIFOs: the local one and the remote one (Leon MSS FIFO).
+ *
+ * The local FIFO holds incoming IPC FIFO entries and therefore is used by RX
+ * code.
+ *
+ * The remote FIFO is where we put outgoing FIFO entries and therefore is used
+ * by TX code.
+ */
+
+/* Get number of entries in the FIFO. */
+static int local_fifo_cnt(struct keembay_ipc_dev *ipc_dev)
+{
+ /*
+ * TIM_IPC_FIFO_STAT
+ *
+ * Bits 31:24: Reserved
+ * Bits 23:16: IPC FIFO fill level
+ * Bits 15:8: IPC FIFO write pointer
+ * Bits 7:0: IPC FIFO read pointer
+ */
+ u32 val = ioread32(ipc_dev->local_fifo_reg + IPC_FIFO_STAT);
+
+ return (val >> 16) & 0xFF;
+}
+
+/* Extract an entry from the FIFO. */
+static u32 local_fifo_get(struct keembay_ipc_dev *ipc_dev)
+{
+ /*
+ * TIM_IPC_FIFO_ATM
+ *
+ * Read a value from IPC HW FIFO.
+ *
+ * If FIFO is empty return 0xFFFFFFFF, otherwise return value from FIFO
+ * with 6 least-significant bits set to 0.
+ * Increment FIFO read pointer and decrement fill level.
+ */
+ return ioread32(ipc_dev->local_fifo_reg + IPC_FIFO_ATM);
+}
+
+/* Disable local FIFO IRQ. */
+static void local_fifo_irq_disable(struct keembay_ipc_dev *ipc_dev)
+{
+ unsigned long flags;
+
+ /* Lock shared between IRQ and Tasklet, use spin_lock_irqsave(). */
+ spin_lock_irqsave(&ipc_dev->local_fifo_irq_lock, flags);
+ if (ipc_dev->local_fifo_irq_enabled) {
+ disable_irq_nosync(ipc_dev->local_fifo_irq);
+ ipc_dev->local_fifo_irq_enabled = false;
+ }
+ spin_unlock_irqrestore(&ipc_dev->local_fifo_irq_lock, flags);
+}
+
+/* Enable local FIFO IRQ. */
+static void local_fifo_irq_enable(struct keembay_ipc_dev *ipc_dev)
+{
+ unsigned long flags;
+
+ /* Lock shared between IRQ and Tasklet, use spin_lock_irqsave(). */
+ spin_lock_irqsave(&ipc_dev->local_fifo_irq_lock, flags);
+ if (!ipc_dev->local_fifo_irq_enabled) {
+ enable_irq(ipc_dev->local_fifo_irq);
+ ipc_dev->local_fifo_irq_enabled = true;
+ }
+ spin_unlock_irqrestore(&ipc_dev->local_fifo_irq_lock, flags);
+}
+
+/* Add an entry to a remote FIFO. */
+static void remote_fifo_put(struct keembay_ipc_dev *ipc_dev, u32 entry)
+{
+ /*
+ * TIM_IPC_FIFO.
+ *
+ * Write a value to IPC FIFO if not full.
+ *
+ * Increment FIFO write pointer and fill level.
+ *
+ * In normal usage the 6 least-significant bits are reserved for the
+ * writing processor to include its processor ID, 0 <= x <= 62, so it
+ * can determine if the word was written correctly by checking the
+ * appropriate bit of register TIM_IPC_FIFO_OF_FLAG[n].
+ */
+ iowrite32(entry, ipc_dev->remote_fifo_reg + IPC_FIFO);
+}
+
+/*
+ * Check if we have overflowed the remote FIFO.
+ *
+ * Check the overflow register of the remote FIFO to see if we have overflowed
+ * it. If so clear our overflow.
+ *
+ * @return True if we have overflowed the FIFO, false otherwise.
+ *
+ */
+static bool remote_fifo_overflow(struct keembay_ipc_dev *ipc_dev)
+{
+ /*
+ * TIM_IPC_FIFO_OF_FLAG[n]
+ *
+ * Read:
+ *
+ * A processor with ID = x can check that its writes to the IPC FIFO
+ * were successful by reading 0 from bit x of TIM_IPC_FIFO_OF_FLAG0 or
+ * TIM_IPC_FIFO_OF_FLAG1.
+ *
+ * Bit x, 0 <= x <= 31, of TIM_IPC_FIFO_OF_FLAG0 is set high if a write
+ * to TIM_IPC_FIFO by processor ID x failed because the FIFO was full.
+ *
+ * Bit x, 0 <= x <= 30, of TIM_IPC_FIFO_OF_FLAG1 is set high if a write
+ * to TIM_IPC_FIFO by processor ID x+32 failed because the FIFO was
+ * full.
+ *
+ * Processors are identified by the 6 least-significant bits of words
+ * written to TIM_IPC_FIFO, i.e. x = TIM_IPC_FIFO[5:0].
+ * Processor ID = 0x3F is reserved to indicate a read of an empty FIFO
+ * has occurred.
+ *
+ * Write:
+ *
+ * Writing 1 to bit position x of TIM_IPC_FIFO_OF_FLAG0 clears the
+ * overflow flag corresponding to processor ID x. Writing 1 to bit
+ * position x of TIM_IPC_FIFO_OF_FLAG1 clears the overflow flag
+ * corresponding to processor ID x+32.
+ *
+ * Writing 0 to any bit position has not effect.
+ */
+ /* KMB_IPC_NODE_ARM_CSS = 0, so we use IPC_FIFO_OF_FLAG0. */
+ const bool rc = ioread32(ipc_dev->remote_fifo_reg + IPC_FIFO_OF_FLAG0) &
+ BIT(KMB_IPC_NODE_ARM_CSS);
+
+ /* Clear our overflow bit, if we overflowed. */
+ if (rc)
+ iowrite32(BIT(KMB_IPC_NODE_ARM_CSS),
+ ipc_dev->remote_fifo_reg + IPC_FIFO_OF_FLAG0);
+
+ return rc;
+}
+
+/*
+ * IPC internal functions.
+ */
+
+/**
+ * channel_close() - Close a channel and return whether it was open or not.
+ * @link: The link the channel belongs to.
+ * @chan_id: The channel ID of the channel to close.
+ *
+ * Return: 0 if the channel was already closed, 1 otherwise.
+ */
+static int channel_close(struct ipc_link *link, u16 chan_id)
+{
+ struct ipc_chan *chan;
+ struct rx_data *pos, *nxt;
+
+ /* Get channel from channel array. */
+ spin_lock(&link->chan_lock);
+ chan = rcu_dereference_protected(link->channels[chan_id],
+ lockdep_is_held(&link->chan_lock));
+
+ /* If channel is already NULL, we are done. */
+ if (!chan) {
+ spin_unlock(&link->chan_lock);
+ return 0;
+ }
+
+ /* Otherwise remove it from the 'channels' array. */
+ RCU_INIT_POINTER(link->channels[chan_id], NULL);
+ spin_unlock(&link->chan_lock);
+
+ /* Set closing flag and wake up user threads waiting on recv(). */
+ chan->closing = true;
+ wake_up_all(&chan->rx_wait_queue);
+
+ /* Wait for channel users to drop the reference to the old channel. */
+ synchronize_srcu(&link->srcu_sp[chan_id]);
+
+ /* Free channel memory (rx_data queue and channel struct). */
+ /*
+ * No need to get chan->rx_lock as we know that nobody is using the
+ * channel at this point.
+ */
+ list_for_each_entry_safe(pos, nxt, &chan->rx_data_list, list) {
+ list_del(&pos->list);
+ kfree(pos);
+ }
+ kfree(chan);
+
+ return 1;
+}
+
+/**
+ * ipc_buf_tx_alloc() - Allocate an IPC buffer to be used for TX.
+ * @pool: The IPC buffer pool from which the IPC buffer will be allocated.
+ *
+ * Return: The pointer to the allocated buffer, or NULL if allocation fails.
+ */
+static struct kmb_ipc_buf *ipc_buf_tx_alloc(struct ipc_buf_pool *pool)
+{
+ struct kmb_ipc_buf *buf;
+ int i;
+
+ /*
+ * Look for a free buffer starting from the last index (pointing to the
+ * next buffer after the last allocated one) and potentially going
+ * through all the buffers in the pool.
+ */
+ for (i = 0; i < pool->buf_cnt; i++) {
+ /*
+ * Get reference to current buffer and increment index (for
+ * next iteration or function call).
+ */
+ buf = &pool->buffers[pool->idx++];
+ if (pool->idx == pool->buf_cnt)
+ pool->idx = 0;
+
+ /* Use current buffer if free. */
+ if (buf->status == KMB_IPC_BUF_FREE) {
+ buf->status = KMB_IPC_BUF_ALLOCATED;
+ return buf;
+ }
+ }
+
+ /* We went through all the buffers and found none free. */
+ return NULL;
+}
+
+/**
+ * init_ipc_buf_pool() - Init the IPC Buffer Pool.
+ * @ipc_dev: The IPC device the pool belongs to.
+ *
+ * Set up the IPC Buffer Pool to be used for allocating TX buffers.
+ *
+ * The pool uses the local IPC Buffer memory previously allocated.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int init_ipc_buf_pool(struct keembay_ipc_dev *ipc_dev)
+{
+ struct ipc_buf_mem *mem = &ipc_dev->local_ipc_mem;
+
+ ipc_dev->ipc_buf_pool.buf_cnt = mem->size / sizeof(struct kmb_ipc_buf);
+
+ /* Fail if we end up having a pool of 0 buffers. */
+ if (ipc_dev->ipc_buf_pool.buf_cnt == 0)
+ return -ENOMEM;
+ /*
+ * Set reserved memory to 0 to initialize the IPC Buffer array
+ * (ipc_buf_pool.buffers); this works because the value of
+ * KMB_IPC_BUF_FREE is 0.
+ */
+ memset(mem->vaddr, 0, mem->size);
+ ipc_dev->ipc_buf_pool.buffers = mem->vaddr;
+ ipc_dev->ipc_buf_pool.idx = 0;
+
+ return 0;
+}
+
+/*
+ * ipc_link_init() - Initialize CPU/VPU IPC link.
+ * @ipc_dev: The IPC device the link belongs to.
+ *
+ * This function is expected to be called during probing.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int ipc_link_init(struct keembay_ipc_dev *ipc_dev)
+{
+ struct ipc_link *link = &ipc_dev->leon_mss_link;
+ struct tx_queue *queue;
+ int i;
+
+ spin_lock_init(&link->chan_lock);
+ for (i = 0; i < ARRAY_SIZE(link->srcu_sp); i++)
+ init_srcu_struct(&link->srcu_sp[i]);
+ memset(link->channels, 0, sizeof(link->channels));
+
+ /* Init TX queues. */
+ for (i = 0; i < ARRAY_SIZE(link->tx_queues); i++) {
+ queue = &link->tx_queues[i];
+ INIT_LIST_HEAD(&queue->tx_data_list);
+ spin_lock_init(&queue->lock);
+ }
+ link->tx_qidx = 0;
+ link->tx_stopping = false;
+ init_completion(&link->tx_queued);
+
+ /* Start TX thread. */
+ link->tx_thread = kthread_run(tx_thread_fn, ipc_dev,
+ "kmb_ipc_tx_thread");
+ return PTR_ERR_OR_ZERO(link->tx_thread);
+}
+
+/**
+ * ipc_link_deinit() - De-initialize CPU/VPU IPC link.
+ * @ipc_dev: The IPC device the link belongs to.
+ */
+static void ipc_link_deinit(struct keembay_ipc_dev *ipc_dev)
+{
+ struct ipc_link *link = &ipc_dev->leon_mss_link;
+ struct tx_queue *queue;
+ struct tx_data *pos, *nxt;
+ int i;
+
+ /* Close all channels. */
+ for (i = 0; i < ARRAY_SIZE(link->channels); i++)
+ channel_close(link, i);
+
+ /* Stop TX Thread. */
+ link->tx_stopping = true;
+ complete(&link->tx_queued);
+ kthread_stop(link->tx_thread);
+
+ /* Flush all TX queue. */
+ for (i = 0; i < ARRAY_SIZE(link->tx_queues); i++) {
+ queue = &link->tx_queues[i];
+ list_for_each_entry_safe(pos, nxt, &queue->tx_data_list, list) {
+ list_del(&pos->list);
+ pos->retv = -EPIPE;
+ complete(&pos->tx_done);
+ }
+ }
+}
+
+static int get_pdev_res_and_ioremap(struct platform_device *pdev,
+ const char *reg_name,
+ void __iomem **target_reg)
+{
+ struct resource *res;
+ void __iomem *reg;
+ struct device *dev = &pdev->dev;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, reg_name);
+ if (!res) {
+ dev_err(dev, "Couldn't get resource for %s\n", reg_name);
+ return -EINVAL;
+ }
+
+ reg = devm_ioremap_resource(dev, res);
+ if (IS_ERR(reg)) {
+ dev_err(dev, "Couldn't ioremap resource for %s\n", reg_name);
+ return PTR_ERR(reg);
+ }
+
+ *target_reg = reg;
+
+ return 0;
+}
+
+/**
+ * ipc_hw_init() - Init IPC-related hardware.
+ * @ipc_dev: The IPC device to initialize.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int ipc_hw_init(struct keembay_ipc_dev *ipc_dev)
+{
+ struct platform_device *pdev = ipc_dev->plat_dev;
+ struct device *dev = &pdev->dev;
+ int rc, irq;
+
+ rc = get_pdev_res_and_ioremap(pdev, "css_fifo",
+ &ipc_dev->local_fifo_reg);
+ if (rc) {
+ dev_err(dev, "Failed to get local FIFO registers\n");
+ return rc;
+ }
+
+ rc = get_pdev_res_and_ioremap(pdev, "mss_fifo",
+ &ipc_dev->remote_fifo_reg);
+ if (rc) {
+ dev_err(dev, "Failed to get remote FIFO registers\n");
+ return rc;
+ }
+
+ /*
+ * Register interrupt handler and initialize IRQ-related fields in IPC
+ * device struct.
+ */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ ipc_dev->local_fifo_irq = irq;
+ ipc_dev->local_fifo_irq_enabled = true;
+
+ tasklet_init(&ipc_dev->rx_tasklet, rx_tasklet_func, (uintptr_t)ipc_dev);
+
+ spin_lock_init(&ipc_dev->local_fifo_irq_lock);
+
+ return devm_request_irq(&pdev->dev, irq, local_fifo_irq_handler, 0,
+ dev_name(&pdev->dev), ipc_dev);
+}
+
+/**
+ * ipc_hw_deinit() - De-initialize IPC-related hardware and memory.
+ * @ipc_dev: The IPC device to de-initialize.
+ */
+static void ipc_hw_deinit(struct keembay_ipc_dev *ipc_dev)
+{
+ /*
+ * Just kill the tasklet as iomem and irq have been requested with
+ * devm_* functions and, therefore, are freed automatically.
+ */
+ tasklet_kill(&ipc_dev->rx_tasklet);
+}
+
+/* Driver probing. */
+static int kmb_ipc_probe(struct platform_device *pdev)
+{
+ int rc;
+ struct keembay_ipc_dev *ipc_dev;
+ struct device *dev = &pdev->dev;
+
+ ipc_dev = devm_kzalloc(dev, sizeof(*ipc_dev), GFP_KERNEL);
+ if (!ipc_dev)
+ return -ENOMEM;
+
+ ipc_dev->plat_dev = pdev;
+
+ /* Init the memory used for local IPC buffers. */
+ rc = init_ipc_rsvd_mem(dev, &ipc_dev->local_ipc_mem,
+ "local_rsvd_mem", LOCAL_IPC_BUFFER_IDX);
+ if (rc) {
+ dev_err(dev, "Failed to set up local reserved memory.\n");
+ return rc;
+ }
+
+ /* Init the memory used for remote IPC buffers. */
+ rc = init_ipc_rsvd_mem(dev, &ipc_dev->remote_ipc_mem,
+ "remote_rsvd_mem", REMOTE_IPC_BUFFER_IDX);
+ if (rc) {
+ dev_err(dev, "Failed to set up remote reserved memory.\n");
+ device_unregister(ipc_dev->local_ipc_mem.dev);
+ return rc;
+ }
+
+ /* Init the pool of IPC Buffers to be used to TX. */
+ rc = init_ipc_buf_pool(ipc_dev);
+ if (rc)
+ goto err_post_rsvd_mem;
+
+ /* Init the only link we have (ARM CSS -> LEON MSS). */
+ rc = ipc_link_init(ipc_dev);
+ if (rc)
+ goto err_post_rsvd_mem;
+
+ /* Init IPC HW FIFO. */
+ ipc_hw_init(ipc_dev);
+
+ platform_set_drvdata(pdev, ipc_dev);
+
+ return 0;
+
+err_post_rsvd_mem:
+ device_unregister(ipc_dev->local_ipc_mem.dev);
+ device_unregister(ipc_dev->remote_ipc_mem.dev);
+
+ return rc;
+}
+
+/* Driver removal. */
+static int kmb_ipc_remove(struct platform_device *pdev)
+{
+ struct keembay_ipc_dev *ipc_dev = platform_get_drvdata(pdev);
+
+ ipc_hw_deinit(ipc_dev);
+
+ ipc_link_deinit(ipc_dev);
+
+ /*
+ * No need to de-alloc IPC memory (local_ipc_mem and remote_ipc_mem)
+ * since it was allocated with dmam_alloc_coherent().
+ */
+
+ device_unregister(ipc_dev->local_ipc_mem.dev);
+ device_unregister(ipc_dev->remote_ipc_mem.dev);
+
+ return 0;
+}
+
+/*
+ * ipc_vpu_to_virt() - Convert a VPU address to a CPU virtual address.
+ *
+ * @ipc_mem: The IPC memory region where the VPU address is expected to be
+ * mapped to.
+ * @vpu_addr: The VPU address to be converted to a virtual one.
+ *
+ * The VPU can map the DDR differently than the CPU. This functions converts
+ * VPU addresses to CPU virtual addresses.
+ *
+ * Return: The corresponding CPU virtual address, or NULL if the VPU address
+ * is not in the expected memory range.
+ */
+static void *ipc_vpu_to_virt(const struct ipc_buf_mem *ipc_mem,
+ u32 vpu_addr)
+{
+ if (unlikely(vpu_addr < ipc_mem->dma_handle ||
+ vpu_addr >= (ipc_mem->dma_handle + ipc_mem->size)))
+ return NULL;
+
+ /* Cast to (u8 *) needed since void pointer arithmetic is undefined. */
+ return (u8 *)ipc_mem->vaddr + (vpu_addr - ipc_mem->dma_handle);
+}
+
+/*
+ * ipc_virt_to_vpu() - Convert an CPU virtual address to a VPU address.
+ * @ipc_mem: [in] The IPC memory region where the VPU address is expected to
+ * be mapped to.
+ * @vaddr: [in] The CPU virtual address to be converted to a VPU one.
+ * @vpu_addr: [out] Where to store the computed VPU address.
+ *
+ * The VPU can map the DDR differently than the CPU. This functions converts
+ * CPU virtual addresses to VPU virtual addresses.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int ipc_virt_to_vpu(struct ipc_buf_mem *ipc_mem, void *vaddr,
+ u32 *vpu_addr)
+{
+ if (unlikely((ipc_mem->dma_handle + ipc_mem->size) > 0xFFFFFFFF))
+ return -EINVAL;
+
+ /* Cast to (u8 *) needed since void pointer arithmetic is undefined. */
+ if (unlikely(vaddr < ipc_mem->vaddr ||
+ (u8 *)vaddr >= ((u8 *)ipc_mem->vaddr + ipc_mem->size)))
+ return -EINVAL;
+
+ *vpu_addr = ipc_mem->dma_handle + (vaddr - ipc_mem->vaddr);
+
+ return 0;
+}
+
+/**
+ * process_rx_fifo_entry() - Process a FIFO entry.
+ * @entry: The FIFO entry to process.
+ * @ipc_dev: The IPC device to use.
+ *
+ * This function performs the following tasks:
+ * - Check the source node id.
+ * - Process the IPC buffer (locate it, validate it, read data info, release
+ * buffer).
+ * - Add an RX Data descriptor (data ptr and data size) to the channel RX queue.
+ */
+static void process_rx_fifo_entry(u32 entry,
+ struct keembay_ipc_dev *ipc_dev)
+{
+ struct device *dev = &ipc_dev->plat_dev->dev;
+ struct ipc_link *link = &ipc_dev->leon_mss_link;
+ struct kmb_ipc_buf *ipc_buf;
+ struct rx_data *rx_data;
+ struct ipc_chan *chan;
+ int idx;
+
+ /* Get IPC buffer. */
+ ipc_buf = ipc_vpu_to_virt(&ipc_dev->remote_ipc_mem, entry);
+ if (unlikely(!ipc_buf)) {
+ dev_warn(dev, "RX: Message out of expected memory range: %x\n",
+ entry);
+
+ /* Return immediately (cannot mark the IPC buffer as free). */
+ return;
+ }
+ if (unlikely(ipc_buf->src_node != KMB_IPC_NODE_LEON_MSS)) {
+ dev_warn(dev, "RX: Message from unexpected source: %d\n",
+ ipc_buf->src_node);
+ goto exit;
+ }
+
+ /* Check destination node. */
+ if (unlikely(ipc_buf->dst_node != KMB_IPC_NODE_ARM_CSS)) {
+ dev_warn(dev, "RX: Message is not for this node\n");
+ goto exit;
+ }
+
+ /* Preliminary channel check. */
+ if (unlikely(ipc_buf->channel >= KMB_IPC_MAX_CHANNELS)) {
+ dev_warn(dev, "RX: Message for invalid channel\n");
+ goto exit;
+ }
+
+ /* Access internal channel struct (this is protected by an SRCU). */
+ idx = srcu_read_lock(&link->srcu_sp[ipc_buf->channel]);
+ chan = srcu_dereference(link->channels[ipc_buf->channel],
+ &link->srcu_sp[ipc_buf->channel]);
+ if (unlikely(!chan)) {
+ srcu_read_unlock(&link->srcu_sp[ipc_buf->channel], idx);
+ dev_warn(dev, "RX: Message for closed channel.\n");
+ goto exit;
+ }
+ rx_data = kmalloc(sizeof(*rx_data), GFP_ATOMIC);
+ if (unlikely(!rx_data)) {
+ /* If kmalloc fails, we are forced to discard the message. */
+ srcu_read_unlock(&link->srcu_sp[ipc_buf->channel], idx);
+ dev_err(dev, "RX: Message dropped: Cannot allocate RX Data.\n");
+ goto exit;
+ }
+ /* Read data info. */
+ rx_data->data_vpu_addr = ipc_buf->data_addr;
+ rx_data->data_size = ipc_buf->data_size;
+ /*
+ * Put data info in rx channel queue.
+ *
+ * Note: rx_lock is shared with user context only (and this function is
+ * run in tasklet context), so spin_lock() is enough.
+ */
+ spin_lock(&chan->rx_lock);
+ list_add_tail(&rx_data->list, &chan->rx_data_list);
+ spin_unlock(&chan->rx_lock);
+
+ /* Wake up threads waiting on recv(). */
+ wake_up_interruptible(&chan->rx_wait_queue);
+
+ /* Exit SRCU region protecting chan struct. */
+ srcu_read_unlock(&link->srcu_sp[ipc_buf->channel], idx);
+
+exit:
+ barrier(); /* Ensure IPC buffer is fully processed before release. */
+ ipc_buf->status = KMB_IPC_BUF_FREE;
+}
+
+/*
+ * The function implementing the RX tasklet.
+ *
+ * Go through the RX SW FIFO (filled by the RX ISR) and process every entry.
+ */
+static void rx_tasklet_func(unsigned long ipc_dev_ptr)
+{
+ struct keembay_ipc_dev *ipc_dev = (struct keembay_ipc_dev *)ipc_dev_ptr;
+ struct rx_circ_buf *rx_sw_fifo = &ipc_dev->rx_sw_fifo;
+ u32 entry;
+
+ /*
+ * Memory barrier: make sure that we get buffer head before any other
+ * operation on the circular buffer.
+ */
+ const unsigned int head = smp_load_acquire(&rx_sw_fifo->head);
+ unsigned long tail = rx_sw_fifo->tail;
+ const size_t size = ARRAY_SIZE(rx_sw_fifo->buf);
+
+ while (CIRC_CNT(head, tail, size)) {
+ /* Extract one item from the buffer. */
+
+ entry = rx_sw_fifo->buf[tail];
+ /* Consume the item. */
+ process_rx_fifo_entry(entry, ipc_dev);
+
+ /* Update tail index (wrapping it if needed) */
+ tail = (tail + 1) & (size - 1);
+ }
+ /* Memory barrier ensuring tail is updated only at the end. */
+ smp_store_release(&rx_sw_fifo->tail, tail);
+
+ /* Enable Local FIFO interrupt. */
+ local_fifo_irq_enable(ipc_dev);
+}
+
+/*
+ * Local FIFO ISR.
+ *
+ * The HW FIFO produces interrupts when not empty. This ISR is called to handle
+ * such interrupts.
+ *
+ * The ISR moves FIFO entries from the HW FIFO to an internal SW FIFO
+ * (implemented as a circular buffer) and then activates a tasklet to handle
+ * the entries in the SW FIFO.
+ *
+ * The ISR tries to empty the HW FIFO, thus making it stop generating
+ * interrupts. If it is not possible to empty the HW FIFO because the SW FIFO
+ * is full, the ISR disables the HW FIFO interrupts, thus preventing ISR
+ * re-activation and giving time to the tasklet to consume entries in the SW
+ * FIFO. When the tasklet it is done, it re-enables the interrupts.
+ */
+static irqreturn_t local_fifo_irq_handler(int irq, void *ptr)
+{
+ struct keembay_ipc_dev *ipc_dev = ptr;
+ struct rx_circ_buf *rx_sw_fifo = &ipc_dev->rx_sw_fifo;
+ unsigned int head = rx_sw_fifo->head;
+ const unsigned int tail = READ_ONCE(rx_sw_fifo->tail);
+ const size_t size = ARRAY_SIZE(rx_sw_fifo->buf);
+
+ /* Copy entries to internal SW FIFO. */
+ while (likely(local_fifo_cnt(ipc_dev))) {
+ /* If SW FIFO is full, disable HW FIFO interrupt. */
+ if (unlikely(!CIRC_SPACE(head, tail, size))) {
+ local_fifo_irq_disable(ipc_dev);
+ goto exit;
+ }
+ rx_sw_fifo->buf[head] = local_fifo_get(ipc_dev);
+
+ /* Update head index (wrapping it if needed). */
+ head = (head + 1) & (size - 1);
+ }
+
+exit:
+ /*
+ * Memory barrier: make sure that updating the buffer head is the last
+ * operation done on the circular buffer.
+ */
+ smp_store_release(&rx_sw_fifo->head, head);
+ tasklet_schedule(&ipc_dev->rx_tasklet);
+ return IRQ_HANDLED;
+}
+
+/**
+ * tx_data_send() - Send a TX data element.
+ * @ipc_dev: The IPC device to use.
+ * @tx_data: The TX data element to send.
+ */
+static int tx_data_send(struct keembay_ipc_dev *ipc_dev,
+ struct tx_data *tx_data)
+{
+ struct device *dev = &ipc_dev->plat_dev->dev;
+ struct kmb_ipc_buf *ipc_buf;
+ u32 entry;
+ int rc;
+
+ /* Allocate and set IPC buffer. */
+ ipc_buf = ipc_buf_tx_alloc(&ipc_dev->ipc_buf_pool);
+ if (unlikely(!ipc_buf)) {
+ rc = -ENOMEM;
+ goto exit;
+ }
+
+ /* Prepare IPC buffer. */
+ ipc_buf->channel = tx_data->chan_id;
+ ipc_buf->src_node = KMB_IPC_NODE_ARM_CSS;
+ ipc_buf->dst_node = tx_data->dst_node;
+ ipc_buf->data_addr = tx_data->vpu_addr;
+ ipc_buf->data_size = tx_data->size;
+
+ /* Ensure changes to IPC Buffer are performed before entry is sent. */
+ wmb();
+
+ /* Initialize entry to ipc_buf VPU address. */
+ rc = ipc_virt_to_vpu(&ipc_dev->local_ipc_mem, ipc_buf, &entry);
+
+ /*
+ * Check validity of IPC buffer VPU address (this error should never
+ * occur if IPC buffer region is defined properly in Device Tree).
+ */
+ if (unlikely(rc)) {
+ dev_err(dev, "Cannot convert IPC buf vaddr to vpu_addr: %p\n",
+ ipc_buf);
+ rc = -ENXIO;
+ goto exit;
+ }
+ if (unlikely(!IS_ALIGNED(entry, KMB_IPC_ALIGNMENT))) {
+ dev_err(dev, "Allocated IPC buf is not 64-byte aligned: %p\n",
+ ipc_buf);
+ rc = -EFAULT;
+ goto exit;
+ }
+
+ /* Set Processor ID in entry. */
+ entry |= (KMB_IPC_NODE_ARM_CSS & 0x3F);
+
+ /* Send entry and check for overflow. */
+ remote_fifo_put(ipc_dev, entry);
+ if (remote_fifo_overflow(ipc_dev))
+ rc = -EBUSY;
+
+exit:
+ /* If an error occurred and a buffer was allocated, free it. */
+ if (rc && ipc_buf)
+ ipc_buf->status = KMB_IPC_BUF_FREE;
+ return rc;
+}
+
+/**
+ * tx_data_dequeue() - Dequeue the next TX data waiting for transfer.
+ * @link: The link from which we dequeue the TX Data.
+ *
+ * The de-queue policy is round robin between each high speed channel queue and
+ * the one queue for all low speed channels.
+ *
+ * Return: The next TX data waiting to be transferred, or NULL if no TX is
+ * pending.
+ */
+static struct tx_data *tx_data_dequeue(struct ipc_link *link)
+{
+ struct tx_data *tx_data;
+ struct tx_queue *queue;
+ int i;
+
+ /*
+ * TX queues are logically organized in a circular array.
+ * We go through such an array until we find a non-empty queue.
+ * We start from where we left since last function invocation.
+ * If all queues are empty we return NULL.
+ */
+ for (i = 0; i < ARRAY_SIZE(link->tx_queues); i++) {
+ queue = &link->tx_queues[link->tx_qidx];
+ link->tx_qidx++;
+ if (link->tx_qidx == ARRAY_SIZE(link->tx_queues))
+ link->tx_qidx = 0;
+
+ spin_lock(&queue->lock);
+ tx_data = list_first_entry_or_null(&queue->tx_data_list,
+ struct tx_data, list);
+ /* If no data in the queue, process the next queue. */
+ if (!tx_data) {
+ spin_unlock(&queue->lock);
+ continue;
+ }
+ /* Otherwise remove rx_data from queue and return. */
+ list_del(&tx_data->list);
+ spin_unlock(&queue->lock);
+
+ return tx_data;
+ }
+
+ return NULL;
+}
+
+/**
+ * tx_data_enqueue() - Enqueue TX data for transfer into the specified link.
+ * @link: The link the data is enqueued to.
+ * @tx_data: The TX data to enqueue.
+ */
+static void tx_data_enqueue(struct ipc_link *link, struct tx_data *tx_data)
+{
+ struct tx_queue *queue;
+ int qid;
+
+ /*
+ * Find the right queue where to put TX data:
+ * - Each high-speed channel has a dedicated queue, whose index is the
+ * same as the channel id (e.g., Channel 1 uses tx_queues[1]).
+ * - All the general-purpose channels use the same TX queue, which is
+ * the last element in the tx_queues array.
+ *
+ * Note: tx_queues[] has KMB_IPC_NUM_HS_CHANNELS+1 elements)
+ */
+ qid = tx_data->chan_id < ARRAY_SIZE(link->tx_queues) ?
+ tx_data->chan_id : (ARRAY_SIZE(link->tx_queues) - 1);
+
+ queue = &link->tx_queues[qid];
+
+ /*
+ * Lock shared between user contexts (callers of ipc_send()) and tx
+ * thread; so spin_lock() is enough.
+ */
+ spin_lock(&queue->lock);
+ list_add_tail(&tx_data->list, &queue->tx_data_list);
+ spin_unlock(&queue->lock);
+}
+
+/**
+ * tx_data_remove() - Remove TX data element from specified link.
+ * @link: The link the data is currently enqueued to.
+ * @tx_data: The TX data element to be removed.
+ *
+ * This function is called by the main send function, when the send is
+ * interrupted or has timed out.
+ */
+static void tx_data_remove(struct ipc_link *link, struct tx_data *tx_data)
+{
+ struct tx_queue *queue;
+ int qid;
+
+ /*
+ * Find the TX queue where TX data is currently located:
+ * - Each high-speed channel has a dedicated queue, whose index is the
+ * same as the channel id (e.g., Channel 1 uses tx_queues[1]).
+ * - All the general-purpose channels use the same TX queue, which is
+ * the last element in the tx_queues array.
+ *
+ * Note: tx_queues[] has KMB_IPC_NUM_HS_CHANNELS+1 elements)
+ */
+ qid = tx_data->chan_id < ARRAY_SIZE(link->tx_queues) ?
+ tx_data->chan_id : (ARRAY_SIZE(link->tx_queues) - 1);
+
+ queue = &link->tx_queues[qid];
+
+ /*
+ * Lock shared between user contexts (callers of ipc_send()) and tx
+ * thread; so spin_lock() is enough.
+ */
+ spin_lock(&queue->lock);
+ list_del(&tx_data->list);
+ spin_unlock(&queue->lock);
+}
+
+/**
+ * tx_thread_fn() - The function run by the TX thread.
+ * @ptr: A pointer to the keembay_ipc_dev struct associated with the thread.
+ *
+ * This thread continuously dequeues and send TX data elements. The TX
+ * semaphore is used to pause the loop when all the pending TX data elements
+ * have been transmitted (the send function 'ups' the semaphore every time a
+ * new TX data element is enqueued).
+ */
+static int tx_thread_fn(void *ptr)
+{
+ struct keembay_ipc_dev *ipc_dev = ptr;
+ struct ipc_link *link = &ipc_dev->leon_mss_link;
+ struct tx_data *tx_data;
+ int rc;
+
+ while (1) {
+ rc = wait_for_completion_interruptible(&link->tx_queued);
+ if (rc || link->tx_stopping)
+ break;
+ tx_data = tx_data_dequeue(link);
+ /*
+ * We can get a null tx_data if tx_data_remove() has been
+ * called. Just ignore it and continue.
+ */
+ if (!tx_data)
+ continue;
+ tx_data->retv = tx_data_send(ipc_dev, tx_data);
+ complete(&tx_data->tx_done);
+ }
+
+ /* Wait until kthread_stop() is called. */
+ set_current_state(TASK_INTERRUPTIBLE);
+ while (!kthread_should_stop()) {
+ schedule();
+ set_current_state(TASK_INTERRUPTIBLE);
+ }
+ __set_current_state(TASK_RUNNING);
+
+ return rc;
+}
+
+/* Internal send. */
+static int __ipc_send(struct keembay_ipc_dev *ipc_dev, u8 dst_node,
+ u16 chan_id, u32 vpu_addr, size_t size)
+{
+ struct ipc_link *link = &ipc_dev->leon_mss_link;
+ struct tx_data *tx_data;
+ int rc;
+
+ /* Allocate and init TX data. */
+ tx_data = kmalloc(sizeof(*tx_data), GFP_KERNEL);
+ if (!tx_data)
+ return -ENOMEM;
+ tx_data->dst_node = dst_node;
+ tx_data->chan_id = chan_id;
+ tx_data->vpu_addr = vpu_addr;
+ tx_data->size = size;
+ tx_data->retv = 1;
+ INIT_LIST_HEAD(&tx_data->list);
+ init_completion(&tx_data->tx_done);
+
+ /* Add tx_data to tx queues. */
+ tx_data_enqueue(link, tx_data);
+
+ /* Signal that we have a new pending TX. */
+ complete(&link->tx_queued);
+
+ /* Wait until data is transmitted. */
+ rc = wait_for_completion_interruptible(&tx_data->tx_done);
+ if (unlikely(rc)) {
+ tx_data_remove(link, tx_data);
+ goto exit;
+ }
+ rc = tx_data->retv;
+
+exit:
+ kfree(tx_data);
+ return rc;
+}
+
+/*
+ * Driver allocation.
+ */
+
+/* Device tree driver match. */
+static const struct of_device_id kmb_ipc_of_match[] = {
+ {
+ .compatible = "intel,keembay-ipc",
+ },
+ {}
+};
+
+/* The IPC driver is a platform device. */
+static struct platform_driver kmb_ipc_driver = {
+ .probe = kmb_ipc_probe,
+ .remove = kmb_ipc_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = kmb_ipc_of_match,
+ },
+};
+
+module_platform_driver(kmb_ipc_driver);
+
+/*
+ * Perform basic validity check on common API arguments.
+ *
+ * Verify that the specified device is a Keem Bay IPC device and that node ID
+ * and the channel ID are within the allowed ranges.
+ */
+static int validate_api_args(struct device *dev, u8 node_id, u16 chan_id)
+{
+ if (!dev || dev->driver != &kmb_ipc_driver.driver)
+ return -EINVAL;
+ if (node_id != KMB_IPC_NODE_LEON_MSS) {
+ dev_warn(dev, "Invalid Link ID\n");
+ return -EINVAL;
+ }
+ if (chan_id >= KMB_IPC_MAX_CHANNELS) {
+ dev_warn(dev, "Invalid Channel ID\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * IPC Kernel API.
+ */
+
+/**
+ * intel_keembay_ipc_open_channel() - Open an IPC channel.
+ * @dev: The IPC device to use.
+ * @node_id: The node ID of the remote node (used to identify the link the
+ * channel must be added to). KMB_IPC_NODE_LEON_MSS is the only
+ * allowed value for now.
+ * @chan_id: The ID of the channel to be opened.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int intel_keembay_ipc_open_channel(struct device *dev, u8 node_id, u16 chan_id)
+{
+ struct ipc_chan *chan, *cur_chan;
+ struct keembay_ipc_dev *ipc_dev;
+ struct ipc_link *link;
+ int rc;
+
+ rc = validate_api_args(dev, node_id, chan_id);
+ if (rc)
+ return rc;
+
+ ipc_dev = dev_get_drvdata(dev);
+ link = &ipc_dev->leon_mss_link;
+
+ /* Create channel before getting lock. */
+ chan = kzalloc(sizeof(*chan), GFP_KERNEL);
+ if (!chan)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&chan->rx_data_list);
+ spin_lock_init(&chan->rx_lock);
+ init_waitqueue_head(&chan->rx_wait_queue);
+
+ /* Add channel to the channel array (if not already present). */
+ spin_lock(&link->chan_lock);
+ cur_chan = rcu_dereference_protected(link->channels[chan_id],
+ lockdep_is_held(&link->chan_lock));
+ if (cur_chan) {
+ spin_unlock(&link->chan_lock);
+ kfree(chan);
+ return -EEXIST;
+ }
+ rcu_assign_pointer(link->channels[chan_id], chan);
+ spin_unlock(&link->chan_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(intel_keembay_ipc_open_channel);
+
+/**
+ * intel_keembay_ipc_close_channel() - Close an IPC channel.
+ * @dev: The IPC device to use.
+ * @node_id: The node ID of the remote node (used to identify the link the
+ * channel must be added to). KMB_IPC_NODE_LEON_MSS is the only
+ * allowed value for now.
+ * @chan_id: The ID of the channel to be closed.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int intel_keembay_ipc_close_channel(struct device *dev, u8 node_id, u16 chan_id)
+{
+ struct keembay_ipc_dev *ipc_dev;
+ struct ipc_link *link;
+ int rc;
+
+ rc = validate_api_args(dev, node_id, chan_id);
+ if (rc)
+ return rc;
+
+ ipc_dev = dev_get_drvdata(dev);
+ link = &ipc_dev->leon_mss_link;
+
+ rc = channel_close(link, chan_id);
+ if (!rc)
+ dev_info(dev, "Channel was already closed\n");
+
+ return 0;
+}
+EXPORT_SYMBOL(intel_keembay_ipc_close_channel);
+
+/**
+ * intel_keembay_ipc_send() - Send data via IPC.
+ * @dev: The IPC device to use.
+ * @node_id: The node ID of the remote node (used to identify the link the
+ * channel must be added to). KMB_IPC_NODE_LEON_MSS is the only
+ * allowed value for now.
+ * @chan_id: The IPC channel to be used to send the message.
+ * @vpu_addr: The VPU address of the data to be transferred.
+ * @size: The size of the data to be transferred.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int intel_keembay_ipc_send(struct device *dev, u8 node_id, u16 chan_id,
+ u32 vpu_addr, size_t size)
+{
+ struct keembay_ipc_dev *ipc_dev;
+ struct ipc_link *link;
+ struct ipc_chan *chan;
+ int idx, rc;
+
+ rc = validate_api_args(dev, node_id, chan_id);
+ if (rc)
+ return rc;
+
+ ipc_dev = dev_get_drvdata(dev);
+ link = &ipc_dev->leon_mss_link;
+ /*
+ * Start Sleepable RCU critical section (this prevents close() from
+ * destroying the channels struct while we are sending data)
+ */
+ idx = srcu_read_lock(&link->srcu_sp[chan_id]);
+
+ /* Get channel. */
+ chan = srcu_dereference(link->channels[chan_id],
+ &link->srcu_sp[chan_id]);
+ if (unlikely(!chan)) {
+ /* The channel is closed. */
+ rc = -ENOENT;
+ goto exit;
+ }
+
+ rc = __ipc_send(ipc_dev, node_id, chan_id, vpu_addr, size);
+
+exit:
+ /* End sleepable RCU critical section. */
+ srcu_read_unlock(&link->srcu_sp[chan_id], idx);
+ return rc;
+}
+EXPORT_SYMBOL(intel_keembay_ipc_send);
+
+/**
+ * intel_keembay_ipc_recv() - Read data via IPC
+ * @dev: The IPC device to use.
+ * @node_id: The node ID of the remote node (used to identify the link the
+ * channel must be added to). KMB_IPC_NODE_LEON_MSS is the only
+ * allowed value for now.
+ * @chan_id: The IPC channel to read from.
+ * @vpu_addr: [out] The VPU address of the received data.
+ * @size: [out] Where to store the size of the received data.
+ * @timeout: How long (in ms) the function will block waiting for an IPC
+ * message; if UINT32_MAX it will block indefinitely; if 0 it
+ * will not block.
+ *
+ * Return: 0 on success, negative error code otherwise
+ */
+int intel_keembay_ipc_recv(struct device *dev, u8 node_id, u16 chan_id,
+ u32 *vpu_addr, size_t *size, u32 timeout)
+{
+ struct keembay_ipc_dev *ipc_dev;
+ struct rx_data *rx_entry;
+ struct ipc_link *link;
+ struct ipc_chan *chan;
+ int idx, rc;
+
+ rc = validate_api_args(dev, node_id, chan_id);
+ if (rc)
+ return rc;
+
+ if (!vpu_addr || !size)
+ return -EINVAL;
+
+ ipc_dev = dev_get_drvdata(dev);
+ link = &ipc_dev->leon_mss_link;
+
+ /*
+ * Start Sleepable RCU critical section (this prevents close() from
+ * destroying the channels struct while we are using it)
+ */
+ idx = srcu_read_lock(&link->srcu_sp[chan_id]);
+
+ /* Get channel. */
+ chan = srcu_dereference(link->channels[chan_id],
+ &link->srcu_sp[chan_id]);
+ if (unlikely(!chan)) {
+ rc = -ENOENT;
+ goto err;
+ }
+ /*
+ * Get the lock protecting rx_data_list; the lock will be released by
+ * wait_event_*_lock_irq() before going to sleep and automatically
+ * reacquired after wake up.
+ *
+ * NOTE: lock_irq() is needed because rx_lock is also used by the RX
+ * tasklet; also lock_bh() is not used because there is no
+ * wait_event_interruptible_lock_bh().
+ */
+ spin_lock_irq(&chan->rx_lock);
+ /*
+ * Wait for RX data.
+ *
+ * Note: wait_event_interruptible_lock_irq_timeout() has different
+ * return values than wait_event_interruptible_lock_irq().
+ *
+ * The following if/then branch ensures that return values are
+ * consistent for the both cases, that is:
+ * - rc == 0 only if the wait was successfully (i.e., we were notified
+ * of a message or of a channel closure)
+ * - rc < 0 if an error occurred (we got interrupted or the timeout
+ * expired).
+ */
+ if (timeout == U32_MAX) {
+ rc = wait_event_interruptible_lock_irq(chan->rx_wait_queue,
+ !list_empty(&chan->rx_data_list) ||
+ chan->closing,
+ chan->rx_lock);
+ } else {
+ rc = wait_event_interruptible_lock_irq_timeout(chan->rx_wait_queue,
+ !list_empty(&chan->rx_data_list) ||
+ chan->closing,
+ chan->rx_lock,
+ msecs_to_jiffies(timeout));
+ if (!rc)
+ rc = -ETIME;
+ if (rc > 0)
+ rc = 0;
+ }
+
+ /* Check if the channel was closed while waiting. */
+ if (chan->closing)
+ rc = -EPIPE;
+ if (rc) {
+ spin_unlock_irq(&chan->rx_lock);
+ goto err;
+ }
+
+ /* Extract RX entry. */
+ rx_entry = list_first_entry(&chan->rx_data_list, struct rx_data, list);
+ list_del(&rx_entry->list);
+ spin_unlock_irq(&chan->rx_lock);
+
+ /* Set output parameters. */
+ *vpu_addr = rx_entry->data_vpu_addr;
+ *size = rx_entry->data_size;
+
+ /* Free RX entry. */
+ kfree(rx_entry);
+
+err:
+ /* End sleepable RCU critical section. */
+ srcu_read_unlock(&link->srcu_sp[chan_id], idx);
+ return rc;
+}
+EXPORT_SYMBOL(intel_keembay_ipc_recv);
+
+MODULE_DESCRIPTION("Keem Bay IPC Driver");
+MODULE_AUTHOR("Daniele Alessandrelli <daniele.alessandrelli@...el.com>");
+MODULE_AUTHOR("Paul Murphy <paul.j.murphy@...el.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/soc/intel/keembay-ipc.h b/include/linux/soc/intel/keembay-ipc.h
new file mode 100644
index 000000000000..bbcf387ecdbd
--- /dev/null
+++ b/include/linux/soc/intel/keembay-ipc.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Keem Bay IPC Linux Kernel API
+ *
+ * Copyright (C) 2018-2020 Intel Corporation
+ */
+
+#ifndef __KEEMBAY_IPC_H
+#define __KEEMBAY_IPC_H
+
+#include <linux/types.h>
+
+/* The possible node IDs. */
+enum {
+ KMB_IPC_NODE_ARM_CSS = 0,
+ KMB_IPC_NODE_LEON_MSS,
+};
+
+int intel_keembay_ipc_open_channel(struct device *dev, u8 node_id, u16 chan_id);
+
+int intel_keembay_ipc_close_channel(struct device *dev, u8 node_id,
+ u16 chan_id);
+
+int intel_keembay_ipc_send(struct device *dev, u8 node_id, u16 chan_id,
+ u32 vpu_addr, size_t size);
+
+int intel_keembay_ipc_recv(struct device *dev, u8 node_id, u16 chan_id,
+ u32 *vpu_addr, size_t *size, u32 timeout);
+
+#endif /* __KEEMBAY_IPC_H */
--
2.17.1
Powered by blists - more mailing lists