linux-kernel - [RESEND PATCH v6 0/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201202163443.26499-1-srinivas.kandagatla@linaro.org>
Date:   Wed,  2 Dec 2020 16:34:41 +0000
From:   Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To:     linus.walleij@...aro.org, bjorn.andersson@...aro.org
Cc:     robh+dt@...nel.org, agross@...nel.org,
        linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        srinivas.kandagatla@...aro.org
Subject: [RESEND PATCH v6 0/2] pinctrl: qcom: Add sm8250 lpass lpi pinctrl support

Sorry for the Noise, Resending this as previous one did not include Linus W email id!!

This patch adds support for LPASS (Low Power Audio SubSystem)
LPI (Low Power Island) pinctrl on SM8250.

This patch has been tested on support to Qualcomm Robotics RB5 Development
Kit based on QRB5165 Robotics SoC. This board has 2 WSA881X smart speakers
with onboard DMIC connected to internal LPASS codec via WSA  and VA macros
respectively.

Most of the work is derived from downstream Qualcomm kernels.
Credits to various Qualcomm authors from Patrick Lai's team who have
contributed to this code.

Am guessing existing qcom folder should cover maintining this driver too!
If not I can send additional patch to consolidate this along with other
Audio related drivers in Maintainer file!

Changes since v5:
	- moved to use FIELD_* or u32_replace/encode apis where possible
	- remove all the SHIFT constants
	- updated function groups as suggested by Bjorn
	- updated setting slew rate as suggested by Bjorn

Srinivas Kandagatla (2):
  dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
  pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver

 .../pinctrl/qcom,lpass-lpi-pinctrl.yaml       | 130 ++++
 drivers/pinctrl/qcom/Kconfig                  |   8 +
 drivers/pinctrl/qcom/Makefile                 |   1 +
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c      | 695 ++++++++++++++++++
 4 files changed, 834 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
 create mode 100644 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c

-- 
2.21.0