| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 2 Dec 2020 10:46:17 -0700
From: Alex Williamson <alex.williamson@...hat.com>
To: Chiqijun <chiqijun@...wei.com>
Cc: Bjorn Helgaas <helgaas@...nel.org>,
"bhelgaas@...gle.com" <bhelgaas@...gle.com>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Yinshi (Stone)" <yin.yinshi@...wei.com>,
"Wangxiaoyun (Cloud)" <cloud.wangxiaoyun@...wei.com>,
zengweiliang zengweiliang <zengweiliang.zengweiliang@...wei.com>,
"Chenlizhong (IT Chip)" <chenlizhong@...wei.com>
Subject: Re: [PATCH] PCI: Add pci reset quirk for Huawei Intelligent NIC
virtual function
On Wed, 2 Dec 2020 17:18:12 +0800
Chiqijun <chiqijun@...wei.com> wrote:
> On 2020/11/30 23:46, Alex Williamson wrote:
> > On Sat, 28 Nov 2020 17:29:19 -0600
> > Bjorn Helgaas <helgaas@...nel.org> wrote:
> >
> >> [+cc Alex]
> >>
> >> On Sat, Nov 28, 2020 at 02:18:25PM +0800, Chiqijun wrote:
> >>> When multiple VFs do FLR at the same time, the firmware is
> >>> processed serially, resulting in some VF FLRs being delayed more
> >>> than 100ms, when the virtual machine restarts and the device
> >>> driver is loaded, the firmware is doing the corresponding VF
> >>> FLR, causing the driver to fail to load.
> >>>
> >>> To solve this problem, add host and firmware status synchronization
> >>> during FLR.
> >>
> >> Is this because the Huawei Intelligent NIC isn't following the spec,
> >> or is it because Linux isn't correctly waiting for the FLR to
> >> complete?
> >
> > Seems like a spec compliance issue, I don't recall anything in the spec
> > about coordinating FLR between VFs.
>
> The spec stipulates that the FLR time of a single VF does not exceed
> 100ms, but when multiple VMs are reset concurrently in Linux, there will
> be multiple VF parallel FLRs, VF of Huawei Intelligent NIC
> FLR will exceed 100ms in this case.
>
> >
> >> If this is a Huawei Intelligent NIC defect, is there documentation
> >> somewhere (errata) that you can reference? Will it be fixed in future
> >> designs, so we don't have to add future Device IDs to the quirk?
> >>
> >>> Signed-off-by: Chiqijun <chiqijun@...wei.com>
> >>> ---
> >>> drivers/pci/quirks.c | 67 ++++++++++++++++++++++++++++++++++++++++++++
> >>> 1 file changed, 67 insertions(+)
> >>>
> >>> diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
> >>> index f70692ac79c5..bd6236ea9064 100644
> >>> --- a/drivers/pci/quirks.c
> >>> +++ b/drivers/pci/quirks.c
> >>> @@ -3912,6 +3912,71 @@ static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
> >>> return 0;
> >>> }
> >>>
> >>> +#define PCI_DEVICE_ID_HINIC_VF 0x375E
> >>> +#define HINIC_VF_FLR_TYPE 0x1000
> >>> +#define HINIC_VF_OP 0xE80
> >>> +#define HINIC_OPERATION_TIMEOUT 15000
> >>> +
> >>> +/* Device-specific reset method for Huawei Intelligent NIC virtual functions */
> >>> +static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe)
> >>> +{
> >>> + unsigned long timeout;
> >>> + void __iomem *bar;
> >>> + u16 old_command;
> >>> + u32 val;
> >>> +
> >>> + if (probe)
> >>> + return 0;
> >>> +
> >>> + bar = pci_iomap(pdev, 0, 0);
> >>> + if (!bar)
> >>> + return -ENOTTY;
> >>> +
> >>> + pci_read_config_word(pdev, PCI_COMMAND, &old_command);
> >>> +
> >>> + /*
> >>> + * FLR cap bit bit30, FLR ACK bit: bit18, to avoid big-endian conversion
> >>> + * the big-endian bit6, bit10 is directly operated here
> >>> + */
> >>> + val = readl(bar + HINIC_VF_FLR_TYPE);
> >>> + if (!(val & (1UL << 6))) {
> >>> + pci_iounmap(pdev, bar);
> >>> + return -ENOTTY;
> >>> + }
> >
> >
> > I don't know exactly what this is testing, but it seems like a
> > feature/capability test that can fail, why is it not done as part of
> > the probe? Can we define bit 6 with a macro? Same for bit 10 in the
> > VF op register below.
>
> The firmware of Huawei Intelligent NIC does not support this feature in
> the old version. here is the reading ability to determine whether the
> firmware supports it.
> In the next patch, I will add a comment here and replace bit 6 and bit
> 10 with macro definitions.
The question remains why this is not done as part of the probe. If the
device firmware doesn't support it, isn't it better to try a regular
FLR and have it return error if the time is exceeded rather than claim
we have a functional device specific reset quirk that will always fail
without ever attempting to FLR the VF? Thanks,
Alex
> >>> +
> >>> + val = readl(bar + HINIC_VF_OP);
> >>> + val = val | (1UL << 10);
> >>> + writel(val, bar + HINIC_VF_OP);
> >>> +
> >>> + /* Perform the actual device function reset */
> >>> + pcie_flr(pdev);
> >>> +
> >>> + pci_write_config_word(pdev, PCI_COMMAND,
> >>> + old_command | PCI_COMMAND_MEMORY);
> >>> +
> >>> + /* Waiting for device reset complete */
> >>> + timeout = jiffies + msecs_to_jiffies(HINIC_OPERATION_TIMEOUT);
> >
> > Yikes, 15s timeout!
>
> Huawei Intelligent NIC supports a maximum of 496 VFs, so the total
> timeout period is set to 15s, which will not reach the timeout time
> under normal circumstances.
>
> >
> >>> + do {
> >>> + val = readl(bar + HINIC_VF_OP);
> >>> + if (!(val & (1UL << 10)))
> >>> + goto reset_complete;
> >>> + msleep(20);
> >>> + } while (time_before(jiffies, timeout));
> >>> +
> >>> + val = readl(bar + HINIC_VF_OP);
> >>> + if (!(val & (1UL << 10)))
> >>> + goto reset_complete;
> >>> +
> >>> + pci_warn(pdev, "Reset dev timeout, flr ack reg: %x\n",
> >>> + be32_to_cpu(val));
> >>> +
> >>> +reset_complete:
> >>> + pci_write_config_word(pdev, PCI_COMMAND, old_command);
> >>> + pci_iounmap(pdev, bar);
> >>> +
> >>> + return 0;
> >>> +}
> >>> +
> >>> static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> >>> { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF,
> >>> reset_intel_82599_sfp_virtfn },
> >>> @@ -3923,6 +3988,8 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
> >>> { PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr },
> >>> { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
> >>> reset_chelsio_generic_dev },
> >>> + { PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_HINIC_VF,
> >>> + reset_hinic_vf_dev },
> >>> { 0 }
> >>> };
> >>>
> >>> --
> >>> 2.17.1
> >>>
> >>
> >
> > .
> >
>
Powered by blists - more mailing lists