[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201202180741.16386-5-srinivas.kandagatla@linaro.org>
Date: Wed, 2 Dec 2020 18:07:39 +0000
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: bjorn.andersson@...aro.org
Cc: linux-arm-msm@...r.kernel.org, agross@...nel.org,
robh+dt@...nel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Subject: [PATCH v2 4/6] arm64: dts: qcom: sm8250: add wsa and va codec macros
Add support for WSA and VA codec macros along with WSA soundwire
controller required for getting audio on RB5.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 56 ++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index ce8ae776160d..d2ade3ab3389 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -2691,6 +2691,62 @@
};
};
+ wsamacro: codec@...0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&wsa_swr_active>;
+
+ compatible = "qcom,sm8250-lpass-wsa-macro";
+ reg = <0 0x3240000 0 0x1000>;
+ clocks = <&audiocc LPASS_CDC_WSA_MCLK>,
+ <&audiocc LPASS_CDC_WSA_NPL>,
+ <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&aoncc LPASS_CDC_VA_MCLK>,
+ <&vamacro>;
+
+ clock-names = "mclk", "npl", "macro", "dcodec", "va", "fsgen";
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "mclk";
+ #sound-dai-cells = <1>;
+ };
+
+ swr0: soundwire-controller@...0000 {
+ reg = <0 0x3250000 0 0x2000>;
+ compatible = "qcom,soundwire-v1.5.1";
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&wsamacro>;
+ clock-names = "iface";
+
+ qcom,din-ports = <2>;
+ qcom,dout-ports = <6>;
+
+ qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1F 0x3F 0x07 0x1F 0x3F 0x0F 0x0F>;
+ qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x06 0x12 0x0D 0x07 0x0A >;
+ qcom,ports-offset2 = /bits/ 8 <0xFF 0x00 0x1F 0xFF 0x00 0x1F 0x00 0x00>;
+ qcom,ports-block-pack-mode = /bits/ 8 <0x0 0x0 0x1 0x0 0x0 0x1 0x0 0x0>;
+
+ #sound-dai-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ };
+
+ vamacro: codec@...0000 {
+ compatible = "qcom,sm8250-lpass-va-macro";
+ reg = <0 0x3370000 0 0x1000>;
+ clocks = <&aoncc LPASS_CDC_VA_MCLK>,
+ <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+ <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+
+ clock-names = "mclk", "macro", "dcodec";
+
+ #clock-cells = <0>;
+ clock-frequency = <9600000>;
+ clock-output-names = "fsgen";
+ #sound-dai-cells = <1>;
+ };
+
adsp: remoteproc@...00000 {
compatible = "qcom,sm8250-adsp-pas";
reg = <0 0x17300000 0 0x100>;
--
2.21.0
Powered by blists - more mailing lists