[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201202040840.663578-3-badhri@google.com>
Date: Tue, 1 Dec 2020 20:08:40 -0800
From: Badhri Jagan Sridharan <badhri@...gle.com>
To: Guenter Roeck <linux@...ck-us.net>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
Badhri Jagan Sridharan <badhri@...gle.com>
Subject: [PATCH v2 3/3] usb: typec: tcpci_maxim: Enable VSAFE0V signalling
Unmask EXTENDED_STATUS_MASK.vSafe0V, ALERT.Extended_Status
and set vbus_vsafe0v to enable VSAFE0V signalling.
Signed-off-by: Badhri Jagan Sridharan <badhri@...gle.com>
---
Changes since v1:
- Setting auto_discharge_disconnect to true instead of 1 as
suggested by Guenter.
---
drivers/usb/typec/tcpm/tcpci_maxim.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.c b/drivers/usb/typec/tcpm/tcpci_maxim.c
index c1797239bf08..319266329b42 100644
--- a/drivers/usb/typec/tcpm/tcpci_maxim.c
+++ b/drivers/usb/typec/tcpm/tcpci_maxim.c
@@ -112,11 +112,18 @@ static void max_tcpci_init_regs(struct max_tcpci_chip *chip)
return;
}
+ /* Enable VSAFE0V detection */
+ ret = max_tcpci_write8(chip, TCPC_EXTENDED_STATUS_MASK, TCPC_EXTENDED_STATUS_VSAFE0V);
+ if (ret < 0) {
+ dev_err(chip->dev, "Unable to unmask TCPC_EXTENDED_STATUS_VSAFE0V ret:%d\n", ret);
+ return;
+ }
+
alert_mask = TCPC_ALERT_TX_SUCCESS | TCPC_ALERT_TX_DISCARDED | TCPC_ALERT_TX_FAILED |
TCPC_ALERT_RX_HARD_RST | TCPC_ALERT_RX_STATUS | TCPC_ALERT_CC_STATUS |
TCPC_ALERT_VBUS_DISCNCT | TCPC_ALERT_RX_BUF_OVF | TCPC_ALERT_POWER_STATUS |
/* Enable Extended alert for detecting Fast Role Swap Signal */
- TCPC_ALERT_EXTND;
+ TCPC_ALERT_EXTND | TCPC_ALERT_EXTENDED_STATUS;
ret = max_tcpci_write16(chip, TCPC_ALERT_MASK, alert_mask);
if (ret < 0) {
@@ -315,6 +322,12 @@ static irqreturn_t _max_tcpci_irq(struct max_tcpci_chip *chip, u16 status)
}
}
+ if (status & TCPC_ALERT_EXTENDED_STATUS) {
+ ret = max_tcpci_read8(chip, TCPC_EXTENDED_STATUS, (u8 *)®_status);
+ if (ret >= 0 && (reg_status & TCPC_EXTENDED_STATUS_VSAFE0V))
+ tcpm_vbus_change(chip->port);
+ }
+
if (status & TCPC_ALERT_RX_STATUS)
process_rx(chip, status);
@@ -442,6 +455,7 @@ static int max_tcpci_probe(struct i2c_client *client, const struct i2c_device_id
chip->data.init = tcpci_init;
chip->data.frs_sourcing_vbus = max_tcpci_frs_sourcing_vbus;
chip->data.auto_discharge_disconnect = true;
+ chip->data.vbus_vsafe0v = true;
max_tcpci_init_regs(chip);
chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
--
2.29.2.576.ga3fc446d84-goog
Powered by blists - more mailing lists