linux-kernel - Re: orion-nand: uncorrectable ECC error on v5.10-rc6

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20201202085948.038efb3e@xps13>
Date:   Wed, 2 Dec 2020 08:59:48 +0100
From:   Miquel Raynal <miquel.raynal@...tlin.com>
To:     Chris Packham <Chris.Packham@...iedtelesis.co.nz>
Cc:     "richard@....at" <richard@....at>, Vignesh R <vigneshr@...com>,
        "boris.brezillon@...labora.com" <boris.brezillon@...labora.com>,
        "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: orion-nand: uncorrectable ECC error on v5.10-rc6

Hi Chris,

Chris Packham <Chris.Packham@...iedtelesis.co.nz> wrote on Wed, 2 Dec
2020 07:47:32 +0000:

> Hi,
> 
> I've just booted v5.10-rc6 on a kirkwood based board (which uses the 
> orion-nand driver) and I get the following errors reported. I haven't 
> started bisecting yet but v5.7.19 mounts the nand flash without any issue.
> 
> ubi0: attaching mtd0
> __nand_correct_data: uncorrectable ECC error
> ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes 
> from PEB 0:0, read only 64 bytes, retry
> __nand_correct_data: uncorrectable ECC error
> ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes 
> from PEB 0:0, read only 64 bytes, retry
> __nand_correct_data: uncorrectable ECC error
> ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes 
> from PEB 0:0, read only 64 bytes, retry
> __nand_correct_data: uncorrectable ECC error
> ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes 
> from PEB 0:0, read 64 bytes
> CPU: 0 PID: 101 Comm: ubiattach Not tainted 5.10.0-rc6+ #1
> Hardware name: Marvell Kirkwood (Flattened Device Tree)
> [<8010ca64>] (unwind_backtrace) from [<80109bd0>] (show_stack+0x10/0x14)
> [<80109bd0>] (show_stack) from [<8045f10c>] (ubi_io_read+0x184/0x304)
> [<8045f10c>] (ubi_io_read) from [<8045f4ac>] (ubi_io_read_ec_hdr+0x44/0x240)
> [<8045f4ac>] (ubi_io_read_ec_hdr) from [<80464db0>] 
> (ubi_attach+0x178/0x15fc)
> [<80464db0>] (ubi_attach) from [<80458d8c>] (ubi_attach_mtd_dev+0x538/0xb48)
> [<80458d8c>] (ubi_attach_mtd_dev) from [<8045a114>] 
> (ctrl_cdev_ioctl+0x170/0x1e0)
> [<8045a114>] (ctrl_cdev_ioctl) from [<80203094>] (sys_ioctl+0x1f8/0x990)
> [<80203094>] (sys_ioctl) from [<80100060>] (ret_fast_syscall+0x0/0x50)
> Exception stack(0x87633fa8 to 0x87633ff0)
> 3fa0:                   00000003 7e9b0c30 00000003 40186f40 7e9b0c30 
> 00000000
> 3fc0: 00000003 7e9b0c30 000148f8 00000036 00014770 00013f90 76f3dfa4 
> 00000000
> 3fe0: 76e936f0 7e9b0c1c 00011f68 76e936fc

I recently contributed a pile of fixes to ensure DT parsing was not
broken and this applies to Orion. Can you please check

mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()

And tell me if you see something wrong there? I assumed this driver was
not supporting on host ECC engines and only soft Hamming was used, is
this assumption wrong?

Thanks,
Miquèl